Professional Documents
Culture Documents
1. All the different parts/pages of your project must be combined into a SINGLE pdf file.
2. The cover page of your project must be the attached MARK SHEET (cover page).
3. This must be followed by a copy of this four page project brief.
4. Thereafter attach the remainder of your assignment in the following order:
Layout Plan of the designed sewer reticulation network.
Printed/handwritten calculations
State all assumptions. No calculations, no marks.
Long section design/drawing
The logical sequence and presentation of your calculations are of paramount importance.
PROJECT BRIEF
A sewer collector pipe has been drawn onto the attached township drawing.
Sketch a suitable layout of the sewer reticulation network for the entire township.
Design the pipe segment from MH D to MH E of the collector pipe in accordance with the CSIR
guidelines for human settlement planning & design. A scale bar has been drawn on the page to assist
you with measurements. All stands must be reticulated.
1. Sketch a suitable layout of the sewer reticulation network for the entire township. Number
the manholes/rodding eyes as MH1, MH2,…,etc. and RE1, RE2,….,etc. All stands must be
reticulated.
2. Calculate the design flow in the pipeline from MH D to MH E. Design the pipeline segment
from MH D to MH E of the collector pipe in accordance with the CSIR guidelines for human
settlement planning & design. The scale of the drawing can be read off from the scale bar
shown at the bottom of the drawing. . Show ALL calculations.
3. Design and draw the long section of the pipeline from MH D to MH E (one pipe). The long
section must contain the following information:
Chainage
Ground level
Depth of ground cover to pipe
Invert Level
Pipe diameter & type of pipe
Slope of pipeline
Full bore velocity and actual velocity
Full bore flow and actual flow
Also specify the vertical and horizontal scale of the long section.
Department of Civil Engineering & Geomatics
Reticulation Design & Management IV(RDMT421)
Project – Due 2 November 2021 – 2nd Semester
Department of Civil Engineering & Geomatics
Reticulation Design & Management IV(RDMT421)
Project – Due 2 November 2021 – 2nd Semester
Total 100
Surname: Name:
Student number:
I hereby declare that the entirety of this assignment is my own original work and that I have not copied
or plagiarized any other project or work.
Signature: Date: