Professional Documents
Culture Documents
1. Please fill out the new form as completely as possible. Areas requi
completed are light yellow in color.
2. This form uses many drop boxes for information. If this form is pr
please fill in the drop box sections manually.
3. The boxes with red triangles in the upper right hand corner of the b
for filling out that particular section. Click on the box to reveal the
assistance.
4. If there are any problems or issues filling out this form, please cont
Authorized Customer Representatvie for assistance.
5. If you a using a specification not listed in the drop box, please fill i
and then type in the specification used in the “If Other, List” box.
6. Make sure to sign the form in the “Approval Section” with a repres
affirms that the information listed in the AAR is accurate.
Substrate Pretreatment
Level Used
Substrate Specification
If other, list:
Spec. Used: 1E4436 IE4093 A
If other, list: Supplier: M/s.Chematall
Zinc Phosphate-
Chemical Name:
GARDOBOND 24 TE
Substrate Finish Class Coating Weight
(g/m2):
3.0 g/m2
Class Used: A2
If other, list
Rust Preventative/Plating
Rust Preventatives Plating/Coating
Brand
1E0198 Brand Specification: 1E0198R
Does brand on physical part align with 1E0198 Specification on drawing? Yes
Photo of part depicting 1E0198 Specification Yes
734941805.xls
Date Modified:Nov.5, 2010
Version 0
Caterpillar Inc. PPAP- Appearance Approval Fo
Date: 02.09.2023 Caterpillar Part Number:
Name of Submitter: SURESH KUMAR C Part Name:
List any deviations used: NO
What is the Delivered Part Condition? Painted
Paint
Measure and record 5 different parts for compliance to the paint finish specification (1E2001 or 1E1525).
Finished Part Characteristics. (Ref: 1E2001, 1E1525) Part 1 Part 2
Process Used to remove Laser Oxide scale: (Acid Bath, Acid Spray, Abrasive blast, Mechanical) ABRASIVE BLAST
Does your paint capabilities meet/exceed finish requirement for this specific part? YES
Does your substrate finish capabilities meet/exceed requirements for this specific part? YES
Paint Film Thickness (mm) measurement: 76, 77, 71, 76, 72 76, 73, 77, 71, 70
Paint Film Thickness (mm) measurement in disc region : 55, 52, 53, 54, 52 51, 53, 57, 54, 56
Gloss Reading (60/20degrees) measurement: 81° - 83°
Orange Peel/Texture Rating measurement: MEETING THE REQUIREMENT OK (UNIFORM
Pencil Hardness measurement: MEETING THE REQUIREMENT OK (NO
Adhesion Rating measurement: NO PAINT PEEL FOUND OK (NO
Color Difference-Visual (pass/fail) measurement: VISUAL MATCH CHECKED WITH
Runs/Sags measurement: MEETING THE REQUIR
Lint/Hair defect measurement: MEETING THE REQUIR
Dirt/Dust defect measurement: NO DUST FOUND
Blister defect measurement: MEETING THE REQUIR
Fisheye/Crater measurement: MEETING THE REQUIR
Scratches/Scuffs measurement: NO SCRATCHES FOU
Pinholes measurement: MEETING THE REQUIR
Solvent Popping measurement: MEETING THE REQUIR
Water Spotting measurement: MEETING THE REQUIR
Polishing Marks measurement: MEETING THE REQUIR
Overspray measurement: MEETING THE REQUIR
Corrosion measurement: MEETING THE REQUIR
List any Seam Sealer(s) used for this part: NA NA
734941805.xls
Date Modified:Nov.5, 2010
Version 0
Caterpillar Inc. PPAP- Appearance Approval Form (AAR)
328-8823 PPAP #:
SPDC WHEEL Supplier Name: Wheels India ltd
Supplier Number:
Manufacturing Location: SPDR
Paint
Paint Specification: 1E2001 Finished
Surface Class: A2
Primer 1E Specification
Spec Used: 1E2732 Topcoat 1E Specification
Spec Used:
If other, list: 1E2732 D 1E1952
If other, list: 1E1952A
Primer Chemistry Used (List specific product below) Topcoat Chemistry Used
None (List specific product below)
Powder None
Liquid YES Powder
VALSPAR-
R CURE 800
PPG - URETHANE YELLOW
Other 51050607/E675HE/IN210K Liquid I53C-102A
Approval Section
I, the supplier, as signed below certify that the I, the Authorized Customer
information that is listed on this form is accurate and Representative, as signed below
factual certify that the information on this
form is acceptable and approved.
C.SURESH KUMAR
734941805.xls
Date Modified:Nov.5, 2010
Version 0
Caterpillar Inc. PPAP- Appearance Approval Form (AAR)
328-8823 PPAP #:
SPDC WHEEL Supplier Name: Wheels India ltd
Supplier Number:
Manufacturing Location: SPDR
Paint
ance to the paint finish specification (1E2001 or 1E1525).
Part 3 Part 4 Part 5
734941805.xls
Date Modified:Nov.5, 2010
Version 0