Professional Documents
Culture Documents
Access-List T1
Access-List T1
Type - 1
It is a type of security protocol which is used in router in order to block or deny the
particular or entire host or network and their available services. It acts as a firewall protocol
by blocking the particular host or network and their available services from unauthorized user
access. ACL must be configured in destination (blocking) router network.
Access-List Types:
1. Standard Access-List.
2. Extended Access-List.
1) Standard Access-List:
It is a type of access-list which is used to block the inbound (incoming)
packets or outbound (outgoing) packets of the particular network or host.
Its ASN values ranges from 1 to 99.
STD Access-list coding :(To block specific network inbound packets only)
r1(config)#int se2/0
r1(config-if)#ip access-group 10 in
r1(config-if)#exit
r1(config)#int fa0/0
r1(config-if)#exit
STD Access-list coding :(To block specific host inbound packets only)
r1(config)#int se2/0
r1(config-if)#ip access-group 10 in
r1(config-if)#exit
r1(config)#int fa0/0
r1(config-if)#exit