RIP, EIGRP, and OSPF are routing protocols. RIP is an open standard distance vector protocol that uses Bellman-Ford algorithm and supports classful routing. EIGRP is a Cisco proprietary hybrid routing protocol that uses DUA algorithm and supports classless routing with VLSM and UDL. OSPF is an open standard link-state protocol that builds a topology table and supports classless routing with VLSM in different areas.
RIP, EIGRP, and OSPF are routing protocols. RIP is an open standard distance vector protocol that uses Bellman-Ford algorithm and supports classful routing. EIGRP is a Cisco proprietary hybrid routing protocol that uses DUA algorithm and supports classless routing with VLSM and UDL. OSPF is an open standard link-state protocol that builds a topology table and supports classless routing with VLSM in different areas.
RIP, EIGRP, and OSPF are routing protocols. RIP is an open standard distance vector protocol that uses Bellman-Ford algorithm and supports classful routing. EIGRP is a Cisco proprietary hybrid routing protocol that uses DUA algorithm and supports classless routing with VLSM and UDL. OSPF is an open standard link-state protocol that builds a topology table and supports classless routing with VLSM in different areas.
2 AD value 120 AD value 90 AD value 110 3 Distance Vector Routing Hybrid routing Link Start Routing 4 Bellman Algorithm Diffusing update algorithm Dijisktra 5 Periodic update Incremental update Incremental update Update 30 sec. Invalid 180 sec. Holddown 180 sec. Flush 240 sec. 6 Only routing table Routing table Routing table Neighbor table Neighbor table Topology table Database table 7 Metric Metric Metric hop count Bandwidth and delay Cost 8 Max. Hope count 15 Default 100 max. 255 Unlimited 9 Only support equal load balancing Equal and unequal Equal Update both broadcast and multicast Update by multi cast Update by multicast 255.255.255.255 – ripv1 224.0.0.10 224.0.0.5 224.0.0.9 - ripv2 224.0.0.6 for dr and bdr 10 No hello timer Send hello packet every 5 sec. Send hello packet every 10 sec.in point and multi-access In non-broadcast – every 30 seconds 11 Rip v1 no VLSM Support VLSM Support FLSM Support VLSM 12 Classful and classless Classless Classless 13 No auto. System no. Autonomous system Area Area 0 backbone Point to point Multi-access (broadcast) Non-broadcast (frame relay) 14 Only IP protocol IP/ipx/apple talk Only IP protocol 15 No formula 256*(10^7/min.bw)+(delay/10) 10^8/BW 16 Adjacency between the router Both are belongs to Both are cisco router same area Metric should be same Hello timer should be Same autonomous no. same