Professional Documents
Culture Documents
v2.8.18
Release Notes
80-VM679-19 A
March 2, 2012
Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the
express written permission of Qualcomm.
Qualcomm reserves the right to make changes to the product(s) or information contained herein without notice. No
liability is assumed for any damages arising directly or indirectly by their use or application. The information
provided in this document is provided on an “as is” basis.
This document contains Qualcomm confidential and proprietary information and must be shredded when discarded.
QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered
in other countries. Other product and brand names may be trademarks or registered trademarks of their respective
owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under
license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM
Incorporated in the United States and other countries.
This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion
contrary to U.S. and international law is strictly prohibited.
QUALCOMM Incorporated
5775 Morehouse Drive
San Diego, CA 92121-1714
U.S.A.
1 Introduction...................................................................................................... 5
1.1 Purpose.......................................................................................................................... 5
1.2 Requirements ................................................................................................................ 5
1.3 Installation instructions ................................................................................................. 5
1.4 Conventions .................................................................................................................. 5
1.5 References..................................................................................................................... 5
1.6 Technical assistance ...................................................................................................... 6
1.7 Acronyms ...................................................................................................................... 6
Tables
2 1.1 Purpose
3 This document provides information for Qualcomm Audio Calibration Tool v2.8.18.
4 1.2 Requirements
5 This product requires:
6 Windows XP or Windows 7
7 Microsoft .NET 2.0 framework (or greater)
14 C:\DNLOAD\xxxxx.exe
15
17 1.4 Conventions
18 Function declarations, function names, type declarations, and code samples appear in a different
19 font, e.g., #include.
20 1.5 References
21 Reference documents, which may include Qualcomm, standards, and resource documents, are
22 listed in Table 1-1. Reference documents that are no longer applicable are deleted from this table;
23 therefore, reference numbers may not be sequential.
Ref. Document
Qualcomm
Q1 Application Note: Software Glossary for Customers CL93-V3077-1
Q2 Qualcomm Audio Calibration Tool v2.x.x User Guide 80-VM407-2
6 1.7 Acronyms
7 For definitions of terms and abbreviations, see [Q1].
8
Impact
Index Technology CR Fixed bug description
category
2. Audio Function/Feature 336225 Fluence Pro/Fluence v5 specialized view cannot set value
Failure (Partial) Problem description
In QACT v2.8.17, Fluence Pro and Fluence v5 specialized view, changing checkboxes for mode
and all advanced parameters cannot be set correctly.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Linked the instance with mode and advanced parameters on UI, so that they can be set correctly.
No side effect from this change is anticipated.
3. Audio Function/Feature 337103 ICS - Cannot convert GBs acdb to .c file with latest QACT
Failure (Partial) Problem description
Audio COPP topology DualMicFluence was not applied to dual mic devices in Conversion
Wizard, resulting in QACT being unable to save the converted acdb file to a .c file.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Fixed the Conversion Wizard that caused the problem.
No side effect from this change is anticipated.
4. Audio Function/Feature 338258 QACT unable to set data for SET_WNR to DSP in Fluence RTC
Failure (Partial) Problem description
In Fluence RTC, QACT is not able to set data for SET_WNR to the DSP. After Mode is changed
to 0xF9F3 and user clicks Set, SET_WNR should be enabled. In addition, after Mode is changed
to 0xFDF3 and user clicks Set, SET_WNR should be disabled. However, no matter what value is
set for Mode in RTC, there is no change for SET_WNR.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Hide SET_WNR from QACT UI. For get/set functionality, its behavior should be same as for
other ParamIDs.
No side effect from this change is anticipated.
Impact
Index Technology CR Fixed bug description
category
5. Audio Function/Feature 339581 Need to allow negative button voltage value in QACT
Failure (Partial) Problem description
In MBHC, the following two arrays cannot be set as negative values:
- MBHC_VButLow[MBHC_NumBut]
- MBHC_VButHigh[MBHC_NumBut]
Failure frequency: Every Time
Scenario frequency: Common
Change description
Updated the value range for following two arrays to -3000 ~ 3000:
- MBHC_VButLow[MBHC_NumBut]
- MBHC_VButHigh[MBHC_NumBut]
No side effect from this change is anticipated.
6. Audio Function/Feature 339739 QACT unable to open workspace files created in QACT v2.8.16 and earlier.
Failure (Partial) Problem description
QACT cannot open workspace files created in QACT v2.8.16 and earlier due to unmatched
names in the file.
Failure frequency: Every Time
Scenario frequency: Common
Change description
When QACT opens a workspace file created in QACT v2.8.16 and earlier, it automatically fixes
the unmatched names.
No side effect from this change is anticipated.
Impact
Index Technology CR Fixed bug description
category
7. Audio Function/Feature 339744 Voice DRC specialized view to have hard-coding for downsamplelevel changed from 8 to 1 and
Failure (Partial) allow field to be editable
Problem description
The downsamplelevel is not a part of DSP voice DRC interface. It is only a UI parameter in
QACT. Before it was hardcoded as 8 on the DSP. In QACT DRC specialized view, it is also hard
coded as 8 and read-only. However, it has been changed to 1 instead of 8 on the DSP. It should
be updated in QACT to match.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Changed downsamplelevel default value to 1. Also, to make DRC specialized view backward
compatible, needed to make it editable for customers, so that for old DSP tuning, 8 still can be
used as the downsamplelevel.
Files affected
MBDRCDataPanel.cs
No side effect from this change is anticipated.
8. Audio Function/Feature 339852 AF coeffs spec view of Echo canceller not updating correctly in RTC mode
Failure (Partial) Problem description
AF coeffs spec view of Echo canceller is not updating correctly in RTC mode. The query to get
NLMS_Taps was failing since the parameter name was recently updated to AF_Taps
Failure frequency: Every Time
Scenario frequency: Common
Change description
Updated AF coeffs spec view to correctly query AF_Taps.
No side effect from this change is anticipated.
9. Audio Function/Feature 339874 QACT unable to push AFE common data in Online mode
Failure (Partial) Problem description
QACT was not handling the case to set AFE common data in Online mode.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Updated QACT to handle setting AFE common data in Online mode.
No side effect from this change is anticipated.
Impact
Index Technology CR Fixed bug description
category
10. Audio User Experience 336053 In MSM8960 single mic voice RTC, AF_Coeffs graphic view shows the first point for 'reserved'
Problem description
In MSM8960 single mic voice RTC, AF_Coeffs graphic view shows the first point for 'reserved'.
The 'reserved' is an int16 value after numbOfTaps, which exists in single mic topology only.
Sometimes, it contains an unusual value instead of '0' in the DSP. This may cause the AF_Coeffs
graphic to look incorrect.
Failure frequency: Every Time
Scenario frequency: Common
Change description
Updated AF_Coeffs view to skip 'reserved' value for single mic and tri-mic topologies.
No side effect from this change is anticipated.
1
2 3.3 Limitations
3 This release has the following limitations:
4 MBADRC and MBDRC crossover frequency points are not persisted to the QACT™ workspace file.
5 In RTC, voice samplerate cannot be obtained. HPF module may show an error message since cut_off_freq could not be identified
6 without the correct voice samplerate.
7
11 NOTE: Build IDs of the applicable customer-facing software releases used for testing will be provided in
12 revision B of these release notes.
13
2 NOTE: New conversions that are added to this release are indicated with boldface type.
1 MSM8960.QX:
2 MSM8960.QX.1.0 ACDB rel 1.0 to MSM8960.QX.1.0 ACDB rel 1.1
3 MSM8960.QX.1.0 ACDB rel 1.1 to MSM8960.QX.1.0 ACDB rel 1.2
4 MSM8960.QX.1.0 ACDB rel 1.2 to MSM8960.QX.1.0 ACDB rel 1.3
5 MSM8960.QX.1.0 ACDB rel 1.3 to MSM8960.QX.1.0 ACDB rel 1.4
6 MSM8960.QX.1.0 ACDB rel 1.4 to MSM8960.QX.1.0 ACDB rel 1.5
7 MSM8960.QX.1.0 ACDB rel 1.5 to MSM8960.QX.1.0 ACDB rel 1.6
8 MSM8960.WA.1.0:
9 MSM8960.WA.1.0 ACDB rel 1.0 to MSM8960.WA.1.0 ACDB rel 1.1
10 MSM8960.WA.1.0 ACDB rel 1.1 to MSM8960.WA.1.0 ACDB rel 1.2
11 MSM8960.WA.1.0 ACDB rel 1.2 to MSM8960.WA.1.0 ACDB rel 1.3
12 MSM8960.WA.1.0 ACDB rel 1.3 to MSM8960.WA.1.0 ACDB rel 1.4
13