You are on page 1of 8

Donwloaded from TVET Exam Papers Nated App

T460(E)(A3)T

NATIONAL CERTIFICATE

DIESEL TRADE THEORY N2


(11040192)

3 April 2017 (X-Paper)


09:00–12:00

This question paper consists of 7 pages.

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -2- T460(E)(A3)T

DEPARTMENT OF HIGHER EDUCATION AND TRAINING


REPUBLIC OF SOUTH AFRICA
NATIONAL CERTIFICATE
DIESEL TRADE THEORY N2
TIME: 3 HOURS
MARKS: 100

za
1. Answer ALL the questions.

2. Read ALL the questions carefully.

o.
3. Number the answers according to the numbering system used in this question
paper.

4. Start each question on a NEW page.

.c
rs
5. Write neatly and legibly.
pe
pa
et
tv

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -3- T460(E)(A3)T

QUESTION 1

1.1 Give THREE reasons for using a tandem brake master cylinder on a modern
vehicle. (3)

1.2 Give FOUR advantages of disc brakes. (4)

1.3 FIGURE 1 shows a tandem brake master cylinder.

Label A–F. Write only the answer next to the question number (1.3) in the

za
ANSWER BOOK.

o.
A
C B

.c
rs
pe

D E F
pa

FIGURE 1 (6)

1.4 State the possible causes of each of the following brake faults:
et

1.4.1 Spongy brakes (3)

1.4.2 Brake pedal fades slowly under pressure (2)


tv

1.4.3 Brake shudder (2)


[20]

QUESTION 2

2.1 Tabulate THREE differences between a petrol engine and a diesel engine.
(3 × 2) (6)

2.2 State the function of the low-pressure fuel lift pump used on diesel engines. (2)

2.3 State TWO methods used by which turbulence of air can be improved during
the intake stroke on a diesel engine. (2)

2.4 Give FOUR advantages of direct injection used on diesel engines. (4)

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -4- T460(E)(A3)T

2.5 Give TWO reasons for each of the following injector faults:

2.5.1 Excessive leak-off

2.5.2 Opening pressure too high

2.5.3 Spray pattern distorted


(3 × 2) (6)
[20]

za
QUESTION 3

3.1 Draw and label an Elliot front axle. Show the following on the drawing:

o.
Thrust bearing on top of stub axle, stub axle and front axle (4)

3.2

.c
State SIX preliminary checks that a mechanic must carry out before wheel
alignment is done on a vehicle. (6)
rs
3.3 FIGURE 2 shows a half-shaft assembly.

Label items A–E. Write only the answer next to the question number (3.3) in
pe

the ANSWER BOOK.

A
pa

B
et

E
tv

FIGURE 2 (5)

3.4 Explain the term tracking. (5)


[20]

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -5- T460(E)(A3)T

QUESTION 4

4.1 Draw and label an indirect-injection Ricardo combustion chamber. Show the
following on the drawing:

The sleeve piston and rings


The position of the pre-combustion chamber
The position of the glow plug in the pre-combustion chamber
The position of the air passage and the injector in the pre-combustion

za
chamber
The spray pattern of the injector and the air flow (6)

4.2 Explain how a pressure test is carried out on an injector. (4)

o.
[10]

QUESTION 5

5.1 FIGURE 3 below shows a synchronising unit.


.c
rs
Label items A–E. Write only the answer next to the question number (5.1) in
the ANSWER BOOK.
pe

A
pa

B
et
tv

E C

FIGURE 3 (5)

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -6- T460(E)(A3)T

5.2 Name THREE common types of gear teeth used in modern gearboxes. (3)

5.3 State THREE functions of a gearbox. (3)

5.4 State the functions of each of the following:

5.4.1 Interlocking mechanism

5.4.2 Locking mechanism


(2 × 1) (2)

za
5.5 Name THREE types of interlocking mechanisms. (3)

5.6 Give FOUR reasons why a gearbox will be noisy when engaged in a gear. (4)

o.
[20]

.c
QUESTION 6

Various options are given as possible answers to the following questions. Choose the
answer and write only the letter (A–D) next to the question number (6.1–6.10) in the
rs
ANSWER BOOK.

6.1 Which of the following does not form part of the fuel supply for a diesel
pe

engine?

A Supply pump
B Spray nozzle
C Air cleaner
pa

D Injector

6.2 Which air cleaner is considered to be the most effective in diesel engines?

A Dry type
et

B Wet type
C Oil bath type
D Whirl type
tv

6.3 In a diesel engine, the pipe carrying fuel from the fuel pump to the injector is
made of ...

A plastic.
B PVC.
C steel.
D copper.

6.4 The duration between the start of injection and the start of ignition is called
the ...

A spill cut-off.
B delay period.
C period of injection.
D period of ignition.

Copyright reserved Please turn over

Donwloaded from TVET lite App


Donwloaded from TVET Exam Papers Nated App
(11040192) -7- T460(E)(A3)T

6.5 The ignition quality of diesel fuel is expressed by an index called …

A octane number.
B cetane number.
C calorific value.
D carbon content.

6.6 The purpose of a gearbox on an automobile is to ...

za
A vary the speed.
B vary the torque.
C provide permanent speed reduction.
D multiply the speed.

o.
6.7 Another name for a torsion bar is a ...

A
B
C
stabiliser bar.
strut rod.
Panhard rod.
.c
rs
D radius rod.

6.8 The king pin inclination is usually ...


pe

A less than ½°.


B between 1° and 2°.
C between 2° and 5°.
D above 7°.
pa

6.9 The distance between the centres of the front wheels is called ...

A the wheel track.


et

B the wheel base.


C the axle width.
D steering geometry.
tv

6.10 A diesel engine has a compression ratio of …

A 6 : 10.
B 10 : 15.
C 15 : 25.
D 25 : 40.
(10 × 1) [10]

TOTAL: 100

Copyright reserved Please turn over

Donwloaded from TVET lite App

You might also like