Professional Documents
Culture Documents
2020
Part II:
Page 1 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
The Laplace transform is one of the mathematical tools used for the solution of ordinary
linear differential equations. The Laplace transform method has the following two attractive
features:
1. The homogeneous equation and the particular integral are solved in one operation.
2. The Laplace transform converts the differential equation into an algebraic equation in
s. It is possible to manipulate the algebraic equation by simple algebraic rules to
obtain the solution in the s-domain. The final solution is obtained by taking the
inverse Laplace transform.
or
F(s ) = L [f (t )]. (4-3)
The variable s is referred to as the Laplace operator, which is a complex variable, s = σ + jω ,
where σ is the real part and ω is the imaginary part, as shown in Figure 4-1.
Im[s]
0 σ Re[s]
Page 2 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
Example 4-1: Let f (t ) be a unit step function that is defined to have a constant value of unity for
t ≥ 0 and a zero for t < 0, namely, f (t ) = u s (t ) . What is its Laplace transform F(s)?
Solution:
1 1 1
= − [0 − 1] =
∞ ∞
F(s ) = ∫ f (t )e − st dt = ∫ u s (t )e − st dt = − e − st ∞
0 ♦
0 0 s s s
Page 3 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
1. Multiplication by a constant-
L [kf (t )] = kF(s ) (4-4)
2. Sum and difference-
L [f1 (t ) ± f 2 (t )] = F1 (s ) ± F2 (s ) (4-5)
3. Differentiation-
df (t )
L = sF(s ) − lim f (t ) = sF(s ) − f (0 ) (4-6)
dt t →∞
d n f (t )
L n = s n F(s ) − s n −1f (0 ) − s n − 2f (1) (0) − ⋅ ⋅ ⋅ − f (n −1) (0) (4-7)
dt
d k f (t )
where f (k ) (0 ) = t =0 .
dt k
4. Integration-
F(s )
L ∫ f (τ ) dτ =
t
(4-8)
0 s
F(s )
L ∫ ∫ f (τ )dτ dt dt 2 ⋅ ⋅ ⋅ dt n −2 dt n −1 = n
t1 t2 t n −1 tn
0 ∫
0
⋅ ⋅ ⋅∫
0 0
1 s
(4-9)
5. Shift in time-
L [f (t - T )u s (t − T )] = e − Ts F(s ) (4-10)
6. Initial-value theorem-
lim f (t ) = lim sF(s ) (4-11)
t →0 s →∞
7. Final-value theorem-
lim f (t ) = lim sF(s ) (4-12)
t →∞ s →0
8. Complex shifting-
[ ]
L e m at f (t ) = F(s ± a ) (4-13)
9. Real convolution (Complex multiplication)-
Page 4 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
The operation of obtaining f(t) from the Laplace transform F(s) is called the inverse Laplace
transformation. The inverse Laplace transform of F(s) is expressed as follows
1 c + j∞
f(t) = L −1F(s ) = ∫ F(s )est ds , (4-15)
2πj c − j ∞
where c is a real constant that is greater than the real parts of all the singularities of F(s).
Equation (4-15) represents a line integral that is to be evaluated in the s-plane. However, for
most engineering purposes the inverse Laplace transform operation can be done simply by
referring to the Laplace transform table, such as the one given in Table 4-1. Before using Table
4-1, one may need to do partial-fraction expansion first, then, use the equations in table 4-1.
Partial-fraction expansion when all the poles(*) of the transfer function are simple and real:
Example 4-3: Find the partial-fraction expansion of the following transfer function, and its
inverse Laplace.
s+3
G (s ) =
(s + 1)(s + 2)
Solution:
s+3 A B
G (s ) = = +
(s + 1)(s + 2) s + 1 s + 2
where,
s+3 −1+ 3
A = (s + 1)G (s ) s = −1 = = =2
s + 2 s = −1 − 1 + 2
and
s+3 −2+3
B = (s + 2)G (s ) s = −2 = = = −1
s + 1 s = −2 − 2 + 1
Therefore,
s+3 2 −1
G (s ) = = +
(s + 1)(s + 2 ) s + 1 s + 2
The inverse Laplace transform of the given transfer function can be obtained by using
some equation in Table 4-1, namely,
2 −1 −1 2 −1 − 1
g(t ) = L −1 + =L +L
−t
= 2e − 1e
− 2t
t≥0
s +1 s + 2 s +1 s+ 2
♦
Note (*): A pole is a value of s that makes a function, such a G(s), infinite, by making the denominator of the
function to zero.
Page 5 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
Partial-fraction expansion when some poles of the transfer function are of multiple order:
Example 4-4: Find the partial-fraction expansion of the following transfer function, and its
inverse Laplace.
1
G (s ) =
s (s + 1)
2
Solution:
1 A A B
G (s ) = = 1 + 22 +
s (s + 1) s
2
s s +1
where,
[
A 2 = s 2G (s ) ] 1
= =1
s=0
s + 1 s = 0
−1
A1 =
d 2
ds
[
s G (s ) ] s=0
=
d 1
=
ds s + 1 s = 0 (s + 1)2 s = 0
= −1
and
1
B = (s + 1)G (s ) s = −1 = =1
s2 s = −1
Therefore,
1 −1 1 1
G (s ) = = + 2+
s (s + 1) s s
2
s +1
The inverse Laplace of the given transfer function can be obtained by using equations in
Table 4-1, namely,
−1 1 1 −1 − 1 −1 1 −1 1
g(t ) = L −1 + 2+ =L +L 2 +L = −1 + t + e
−t
t≥0
s s s +1 s s s +1
♦
Example 4-5: Find the partial-fraction expansion of the following transfer function, and its
inverse Laplace.
1
G (s ) =
s(s + 1) (s + 2)
3
Solution:
1 A1 A2 A3 B C
G (s ) = = + + + +
s(s + 1) (s + 2 ) s + 1 (s + 1) (s + 1) s + 2 s
3 2 3
where
Page 6 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
[
A 3 = (s + 1) G (s )
3
] 1
= = −1
s = −1
s(s + 2 ) s = −1
− (2s + 2)
A2 =
d
ds
[
(s + 1)3 G(s ) ] s = −1
=
d 1
= 2
ds s(s + 2 ) s = −1 s (s + 2)2 s = −1
=0
1 d − 2(s + 1)
A1 =
1 d2
2! ds 2
[
(s + 1)3 G(s ) ] s = −1
=
1 d2 1
2 =
2! ds s(s + 2) s = −1 2 ds s 2 (s + 2)2 s = −1
−1 2(s + 1) 2(s + 1)
= 2 + 2 + 3 2
= −1
s (s + 2 )2
s (s + 2 )3
s (s + 2 ) s = −1
1 1
B = (s + 2)G (s ) s = −2 = = = 0.5
s(s + 1) s = −2 − 2(− 2 + 1)
3
and
1 1
C = sG (s ) s = 0 = = = 0.5
(s + 1) (s + 2) s = 0 (0 + 1) (0 + 2)
3 3
Therefore,
1 −1 0 −1 0.5 0.5
G (s ) = = + + + +
s(s + 1) (s + 2 ) s + 1 (s + 1) (s + 1) s + 2
3 2 3
s
The inverse Laplace of the given transfer function can be obtained by using Table 4-1,
namely,
−1 −1 0.5 0.5 −1 −1 −1
= L −1 + L −1
0.5 −1 0.5
g(t ) = L −1 + + + + L 3 +L
s + 1 (s + 1) s + 2 s + 1 (s + 1) s+ 2
3
s s
1
= 0.5 − e − t + 0.5e − 2t − t 3−1e − t t≥0
(3 − 1)!
= 0.5 − e − t + 0.5e −2t − 0.5t 2e − t t≥0
♦
Page 7 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
ω2n ω2n A1 A2 B
G (s ) = = = + +
s (s + 2ζωn s + ωn ) s(s + α − jω)(s + α + jω) s + α − jω s + α + jω s
2 2
and
α = ζω n ; ω = ωn 1 − ζ 2
where
π
ω2n ω2n ω − j θ +
A1 = (s + α − jω )G (s ) = = = n e 2
s = − α + jω
s(s + α + jω ) s = − α + jω
(− α + jω)(2 jω) 2ω
π
ω2n ω2n ω j θ +
A 2 = (s + α + jω )G (s ) = = = n e 2
s = − α − jω
s(s + α − jω) s = − α − jω
(− α − jω)(− 2 jω) 2ω
ω
with θ = tan −1 (please note this angle is in the second quadrant)
− α
and
ω2n
B = sG (s ) = =1
s=0
(s 2 + 2ζωn s + ω2n ) s=0
Therefore,
2
- j θ + π2 j θ +
π
ω ωn e
e 2 1
G (s ) = n
= + +
s (s 2 + 2ζωn s + ω2n ) 2ω s + α − jω s + α + jω s
The inverse Laplace of the given transfer function can be obtained by using Table 4-1,
namely,
ωn − j θ + 2 (− α + jω )t ωn − α t − j θ + 2 − ωt j θ + − ωt
π π π π
j θ +
g (t ) = 1 + e e +e 2 ( − α − jω )t
e =1+ e e + e 2
2ω 2ω
j ωt − θ − π2 − j ωt − θ −
π
ωn − α t e
+e 2
ωn − α t e j(ωt − θ ) − e − j(ωt − θ ) ω
=1+ e = 1 + e = 1 + n e − α t sin (ωt − θ )
ω 2 ω 2j ω
=1+
1
1−ζ 2
(
e −ζω n t sin ωn 1 − ζ 2 t − θ ) t≥0
where
1−ζ 2
θ = tan −1 ♦
− ζ
Page 8 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
1 δ(t)
(Impulse at t = 0)
1 us(t)
s (Unit Step at t = 0)
1 t
s2 (or t [u(t)], Ramp at t = 0)
n! tn
s n +1 (n = positive integer)
1
e − at
s+a
1
e − at − e −bt
(s + a )(s + b )
b−a
ωn
s + ω2n
2 sin ωn t
s
s + ω2n
2 cos ωn t
1
te − at
(s + a )2
n!
t n e − at
(s + a )n +1
ωn
e − at sin ωn t
(s + a )2 + ω2n
s+a
e-at cos ωn t
(s + a )2 + ω2n
Page 9 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
1 1 n −1
−
t
t e T
(1 + sT )n T n (n − 1)!
ω2n ωn
e −ζω n t sinωn 1 − ζ 2 t
s 2 + 2ζωn s + ω2n 1−ζ 2
2
1+
1− ζ
1
2
(
e −ζω n t sin ωn 1 − ζ 2 t - φ )
ω n
s (s + 2ζωn s + ω2n )
2
1−ζ 2
where φ = tan −1
−ζ
2
ω2n
1−ζ 2
(
e −ζω n t sin ωn 1 − ζ 2 t + φ )
sω n
s + 2ζωn s + ω2n
2
1−ζ 2
where φ = tan −1
−ζ
1 −
t
1- e T
s (1 + sT )
1 t + T −T
t
1− e
s (1 + sT )
2
T
1 −
t
t − 2T + (t + 2T )e T
s (1 + sT )
2 2
1 + as −
t
s (1 + sT )
2 t + (a − T )1 − e T
s 1
t sin ωn t
(s 2
+ω n )
2 2 2ωn
s 1
(cos ωn1t - cos ωn2 t )
(s 2
+ω 2 2
n1 ) (s 2
+ω )
2 2
n2
ω − ω2n1
2
n2
s2 1
(sin ωn t + ωn t cos ωn t )
(s 2
+ω )
2 2
n
2ω n
Page 10 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
V. Time-Domain Analysis:
The time response of a control system is usually divided into two parts: the transient response
and the steady-state response. Let c(t ) denote a time response and be expressed as follows:
To facilitate the time-domain analysis, the following input test signals are often used.
Step Function: The step function represents an instantaneous change in the reference input
variable. At time t < 0, the signal is zero while at t ≥ 0, the signal is R, namely,
R t≥0
r(t) =
0 t<0
, (5-2)
where R is a constant. Or,
r(t) = Rus(t), (5-3)
where us(t) is the unit step function. The step function as a function of time is shown in Figure
5-1.
r(t)
0 t
Ramp Function: The ramp function is a signal to have a constant change in value at the same rate
with respect to time and can be expressed as
Rt t ≥ 0
r(t) =
0 t<0
. (5-4)
Page 11 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
As one can see, the slope of the signal is a constant, R. The ramp function is shown in Figure 5-
2.
r(t)
Slope = R
0 t
r(t)
0 t
A closed-loop system with a negative feedback is shown in Figure 5-4. The output can
be expressed as a function of the input as follows:
Page 12 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
H(s)
G (s )
C(s ) = R (s ) . (5-6)
1 + G (s )H(s )
Also, the error, E(s), can be expressed as:
E(s ) = R (s ) − H(s )C(s ) , (5-7)
then,
G (s )H(s ) 1
E(s ) = 1 − R (s ) = ⋅ R (s ) . (5-8)
1 + G (s )H(s ) 1 + G (s )H(s )
The steady-state error in time domain can be obtained by applying the final-value theorem,
namely,
1
e ss (t ) = lim e(t ) = lim sE(s ) = lim s ⋅ ⋅ R (s ) . (5-9)
t →∞ s →0 s→0 1 + G (s )H(s )
where K p is the step error constant (or position error constant). Then, the equation (5-10) can
be simplified as
R R R
e ss (t ) = lim = = . (5-12)
s →0 1 + G (s )H (s ) 1 + lim G (s )H(s ) 1 + K p
s →0
One can easily realize that to have the steady-state error to be zero when the input is a step
function, K p must be infinite. The steady-state error due to a unit step function input is also
called the steady-state position error.
Page 13 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
(2) If the input is a ramp function, its Laplace transform can be expressed as
R
R (s ) = . (5-13)
s2
Then, the steady-state error of the system is
1 R 1 R
ess (t ) = lim s ⋅ ⋅ 2 = lim = . (5-14)
s→0 1 + G (s )H(s ) s s → 0 s + sG (s )H(s ) lim s G (s )H(s )
s →0
If one defines
K v = lim s G (s )H(s ) , (5-15)
s →0
where K v is the ramp error constant (or velocity error constant). Therefore, the equation (5-14)
can be simplified as
R
e ss (t ) = . (5-16)
Kv
Therefore, to have zero steady-state error, Kv needs to be infinite. The steady-state error due to a
unit ramp function input is called the steady-state velocity error.
(3) If the input is a parabolic input, its transfer function is listed below
R
R (s ) = . (5-17)
s3
The steady-state error of the system can be obtained as follows
1 R 1 R
ess (t ) = lim s ⋅ ⋅ 3 = lim 2 2 = . (5-18)
s→0 1 + G (s )H(s ) s s → 0 s + s G (s )H (s ) lim s G (s )H(s )
2
s→0
If one defines the parabolic error constant (or acceleration error constant),
K a = lim s 2 G (s )H(s ) . (5-19)
s→0
C(s)
R(s) + K (s + 6 )
- s(s + 2)(s + 4 )
Page 14 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
(A) For K = 10, what is the steady-state error to a unit step input?
(B) For K = 10, what is the steady-state error to a unit ramp input?
(C) For K = 10, what is the steady-state error to a unit parabolic input?
(D) Find the value of K such that the steady-state error to a unit ramp input is 5%.
Solution:
(A) For a unit step input and K = 10:
10(s + 6)
K p = lim G (s )H(s ) = lim ⋅1 = ∞ .
s →0 s(s + 2 )(s + 4 )
s →0
1 1
e ss (t ) = = = 0.
1+ Kp 1+ ∞
(B) For a unit ramp input and K = 10:
10(s + 6 ) 10(s + 6 ) 60
K v = lim s G (s )H(s ) = lim s ⋅ 1 = lim = = 7.5
s →0 s →0
s(s + 2)(s + 4 ) s → 0 (s + 2)(s + 4) 8
1 1
e ss (t ) = = = 0.1333 = 13.33% .
K v 7.5
(C) For a Parabolic input and K = 10:
10(s + 6 ) 10(s + 6)
K a = lim s 2 G (s )H(s ) = lim s 2 ⋅ 1 = lim s ⋅ = 0.
s →0 s →0
s(s + 2)(s + 4) s → 0 (s + 2)(s + 4)
1 1
e ss (t ) = = = ∞.
Ka 0
(D) From part (B), for a unit ramp input,
K (s + 6) K (s + 6) 6K
K v = lim s G (s )H(s ) = lim s ⋅ 1 = lim =
s →0 s →0
s(s + 2)(s + 4 ) s → 0 (s + 2)(s + 4) 8
1 1
e ss (t ) = = = 5% = 0.05 .
K v 6K
8
8 80
K= = .
6 ⋅ (0.05) 3
♦
A stable system can be classified according to the degree of the polynomial for which the error is
a constant, and the classification is called the system type. In general, the open-loop transfer
function G(s)H(s) can be written as
K (1 + a 1s )(1 + a 2 s ) • • • (1 + a m s )
G (s )H(s ) = , (5-21)
s T (1 + b1s )(1 + b 2 s ) • • • (1 + b n s )
where that K, all a’s and b’s are constants and the T = 0, 1, 2,….. The type of feedback control
system is referring to the order of the pole of G(s)H(s) at s = 0. Therefore, the system is of type
T. For instance, a feedback control system with
Page 15 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
5(1 + 2s )
G (s )H(s ) =
s(1 + 3s )(1 + 4s )
is of type 1.
The significance of system types is as follows (when restricted to unity feedback systems):
The following summary of the Steady-State Errors due to Step, Ramp and Parabolic inputs can
be constructed, as shown in Table 5-1, where T denotes the type of system.
Parabolic
Kp Kv Ka Step Ramp
Type (Acceleration)
R
T=0 K 0 0 e ss = e ss = ∞ e ss = ∞
1+ Kp
R
T=1 ∞ K 0 e ss = 0 e ss = e ss = ∞
Kv
R
T=2 ∞ ∞ K e ss = 0 e ss = 0 e ss =
Ka
T≥3 ∞ ∞ ∞ e ss = 0 e ss = 0 e ss = 0
Example 5-2. For the given system with its block diagram listed below:
R(s) 5 C(s)
+ +
_ _ s (1 + s )
T
Page 16 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
H(s) = 1
One may first apply case 3 in Table 1-1 to obtain the transfer function for the inner
closed-loop as
5
s (1 + s )
T
5
G (s ) = = T .
1+ T
5
⋅s s (1 + s ) + 5s
s (1 + s )
Then, use case 3 once again with a unity feedback (H(s)=1), therefore, the overall
transfer function can be obtained as
5
C(s ) s (1 + s ) + 5s
T
5
= = T .
R (s ) 5 s (1 + s ) + 5s + 5
1+ T ⋅1
s (1 + s ) + 5s
Or, one can use Mason Rule and get the overall transfer function as
5
C(s ) s (1 + s )
T
5
= = .
R (s ) 5 5 s (1 + s ) + 5s + 5
T
1+ ⋅s + T ⋅1
s (1 + s )
T
s (1 + s )
(B) T = 0, the open-loop transfer function G(s)H(s) is
5 5
G (s )H(s ) = = .
(1 + s ) + 5s 1 + 6s
To find the steady-state position error, the input is assumed as a unit step input,
1
R (s ) = , and the position error constant can be calculated as
s
Page 17 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
5
K p = lim G (s )H(s ) = lim ⋅1 = 5 .
s →0 1 + 6s
s →0
Therefore, the steady-state position error can be obtained, namely,
1 1 1
e ss,p (t ) = = = .
1+ Kp 1+ 5 6
To find the steady-state velocity error, the input is assumed as a unit ramp input,
1
R (s ) = , and the velocity error constant can be calculated as
s2
5
K v = lim s G (s )H(s ) = lim s ⋅ = 0.
s →0 s →0 1 + 6s
Therefore, the steady-state velocity error is
1 1
e ss,v (t ) = = =∞.
Kv 0
(C) T = 1, the open-loop transfer function G(s)H(s) is
5 5
G (s )H(s ) = = .
s(1 + s ) + 5s s(s + 6)
To find the steady-state position error, the input is assumed as a unit step input,
1
R (s ) = , and the position error constant can be calculated as
s
5
K p = lim G (s )H(s ) = lim ⋅1 = ∞ .
s →0 s(s + 6 )
s →0
Therefore, the steady-state position error can be obtained, namely,
1 1
e ss,p (t ) = = = 0.
1+ Kp 1+ ∞
To find the steady-state velocity error, the input is assumed as a unit ramp input,
1
R (s ) = , and the velocity error constant can be calculated as
s2
5 5 5
K v = lim s G (s )H(s ) = lim s ⋅ = lim = .
s →0 s →0 s(s + 6) s → 0 s+6 6
Therefore, the steady-state velocity error is
1 1 6
e ss, v (t ) = = = . ♦
Kv 5 5
6
Page 18 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
First-Order Systems:
where τ is the time constant of the given control system. By plotting the output signal in time
domain, Figure 5-5 can be obtained.
c(t)
1
0.982
0.95
0.865
0.632
0 t
τ 2τ 3τ 4τ
Fig. 5-5. Typical unit step input response of a first-order system.
Although true second-order control systems are rare in practice, their analysis generally helps to
form a basis for understanding of design and analysis techniques. The transfer function of a
classical second-order system can be represented as
C(s ) ω2n
= 2 , (5-25)
R (s ) s + 2ζωn s + ω2n
Page 19 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
where
ζ > 1 : overdamped,
ζ = damping ratio ζ = 1 : critically damped,
ζ < 1 : underdamped,
and
ωn = undamped natural frequency.
c (t ) = 1 −
1
1−ζ 2
(
e −ζω n t sin 1 − ζ 2 ωn t + φ , ) (5-26)
where
1−ζ 2
φ = tan −1 . (5-27)
ζ
The time domain plot for such a second-order system with a unit step input is shown in Figure 5-
6.
1.5
O ver Shoot
1 +2%
90%
0.5
10% t r
0
0 1 2 3 4 5 6 7 8 9 10
tp ts
Fig. 5-6. The typical unit step input response of a second-order system.
There are some important performance criteria that are typically used to characterize the
transient response to a unit step input include percent (maximum) overshoot, peak time, rise time
and settling time.
Page 20 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
Percent overshoot: the percentage of the maximum overshoot (the largest deviation of
the output over the step input during the transient state).
ζπ
−
1−ζ 2
%OS = e × 100% . (5-28)
Rise time: The time required for the output to rise from 10% of the final value to
90% of the final values.
0.8 + 2.5ζ
tr = seconds. (5-30)
ωn
Settling time: The time it takes for the system to settle within certain percentage of the
final value.
4
ts = seconds. (for 2%) (5-31)
ζωn
Example 5-3: The transfer function of the second order system given below is obtained in
R(s) + C(s)
4 1
- s +1 s
C(s ) 4
Example 1-1 as = 2 . What are the percent overshoot, peak time, rise time and the
R (s ) s + s + 4
settling time for this system?
Solution:
By comparing the actual transfer function of the system with the classical second-order
equation, namely,
C(s ) 4 ω2n
= =
R (s ) s 2 + s + 4 s 2 + 2ζωn s + ω2n
One should be able to obtained the undamped natural frequency and the ramping ratio as
1
ωn = 2 ; ζ = = 0.25
2ωn
Page 21 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
4 1
Step s+1 s
Sum Integrator Scope
Transfer Fcn
To Workspace
C(s ) 4 ω n2
= =
R (s ) s 2 + s + 4 s 2 + 2ζω n s + ω n2
1.5
O ver Shoot
1 +2%
90%
0.5
10% t r
0
0 1 2 3 4 5 6 7 8 9 10
tp ts
ζπ 0.25π
− −
1−ζ 2
% Overshoot: %OS = e × 100 = e 1− 0.252
× 100 = 44.43%
π π
Peak time: tp = = = 1.6223 seconds
ωn 1 − ζ 2
2 1 − 0.252
0.8 + 2.5ζ 0.8 + 2.5 × 0.25
Rise time: tr = = = 0.7125 second
ωn 2
4 4
Settling time: ts = = = 8 seconds (for 2%)
ζωn 0.25 × 2
If one uses Matlab/Simulink to model this simple system, one should be able to get the
plot shown above and confirm the answers obtained with equations (5-28)~(5-31).
♦
Page 22 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
Example 5-4: Find K and a for the closed-loop system below such that the transient response to a
step input satisfies: %OS ≤ 5% & t s ≤ 4 seconds
R(s) + C(s)
1
K
- s(s + a )
Solution:
The transfer function of the system can be obtained as
K
C(s ) s(s + a ) K ω n2
= = 2 = 2 .
R (s ) K s + a s + K s + 2ζω s + ω 2
1+ ⋅1 n n
s(s + a )
Therefore,
K = ω2n ; a = 2ζωn .
The percent overshoot is required to be less than or equal to 5%, hence,
ζπ
−
1−ζ 2
%OS = e × 100% =5%
ζπ
⇒ − = ln (0.05) = −2.995732
1−ζ 2
⇒ (0.95357 ) 1−ζ 2 = ζ
⇒ 0.9093 − 0.9093ζ 2 = ζ 2
0.9093
⇒ ζ2 =
1.9093
0.9093
⇒ ζ = = 0.47625 = 0.69
1.9093
To find the undamped natural frequency, one needs to use the other given condition,
namely,
4
ts = =4
ζωn
⇒ ζωn = 1
1 1
⇒ ωn = = = 1.4491
ζ 0.69
Page 23 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
Other than using Matlab/Simulink to verify the solution, one may use a spreadsheet to
plot the output as given by equations (5-26) and (5-27).
1.2
0.8
0.6
0.4
0.2
0
0 2 4 6 8 10
Page 24 of 25
www.PDHcenter.com PDH Center E139 www.PDHonline.org
References:
[1] Gene F. Franklin, J. David Powell and Abbas Emami-Naeini, Feedback Control of
Dynamic Systems – 2nd Edition, Addison Wesley, 1991
[2] Benjamin C. Kuo, Automatic Control Systems – 5th Edition, Prentice-Hall, 1987
[3] John A. Camara, Practice Problems for the Electrical and Computer Engineering PE Exam
– 6th Edition, Professional Publications, 2002
[4] NCEES, Fundamentals of Engineering Supplied-Reference Handbook – 6th Edition, 2003
[5] Merle C. Potter, FE/EIT Electrical Discipline-Specific Review for the FE/EIT Exam – 5th
Edition, Great Lakes Press, 2001
[6] Merle C. Potter, Principles & Practice of Electrical Engineering – 1st Edition, Great Lakes
Press, 1998
Page 25 of 25