Professional Documents
Culture Documents
Our manual antenna mast lifter is also a rack height equipment carrier, suitable for car, ship and land. It can
elevate communications antenna, illumination, lightning shielding, optical transmission and camera
equipment to a predetermined height quickly, reliably and securely. After the work is completed, it is also able
to reduce the above-mentioned equipment to a predetermined height quickly, reliably and safely. Our
company's manual manual antenna mast lifter is made of high-strength aluminum alloy, with the advantage of
corrosion-resistant, light weight, large load, low noise, fast lift, small shock resistance, stable and so on. It
could meet different areas, different occasions on the height and load requirements, in addition, it is also
widely used in golf, large football night lighting, etc.
Working principle:
The system uses screw drive or wire rope drive. Its good self-locking performance achieving reliable
self-locking in any position improves the safety of reliability.
1, Vertical use: manual antenna mast lifter can be installed on the ground, as well as on the vehicle. But no
matter where it is installed, make sure it stays perpendicular to the ground. If the manual antenna mast lifter is
tilted, it will affect the effect of the manual antenna mast lifter rising and descending. If the manual antenna
mast lifter is heavily tilted or tilted for a long time, it will cause damage and danger to the manual antenna
mast lifter.
2, Cable fixed: manual antenna mast lifter needs to be installed in a fixed object, and could not shake, such as
walls, car body, foundation piles and so on. The fixed points should be two points at least, one of them in the
manual antenna mast lifter, the distance between the two points is greater than 2/3 height of the manual
antenna mast lifter . The connection should be firm and reliable.
Environmental adaptability
Reliability Rated load for 30 consecutive movements without damage or permanent deformation