Professional Documents
Culture Documents
QT
REFERENCE DESIGNATION
Y
No specific AR SAFETY CLIP - CIRCUIT BREAKER
C. Referenced Information
REFERENCE DESIGNATION
Ref. 23-73-00-861-001-A Energize the Cabin Intercommunication Data System (CIDS)
Ref. 24-41-00-861-002-A Energize the Aircraft Electrical Circuits from the External Po
wer
Ref. 24-41-00-861-002-A01 Energize the Aircraft Electrical Circuits from the APU
Ref. 24-41-00-861-002-A02 Energize the Aircraft Electrical Circuits from Engine 1(2)
Ref. 24-41-00-862-002-A De-energize the Aircraft Electrical Circuits Supplied from the
External Power
Ref. 24-41-00-862-002-A01 De-energize the Aircraft Electrical Circuits Supplied from the
APU
Ref. 24-41-00-862-002-A02 De-energize the Aircraft Electrical Circuits Supplied from the
Engine 1(2)
Ref. 31-32-00-860-005-A Procedure to Get Access to the SYSTEM REPORT/TEST FIRE
PROT Page
Ref. 31-60-00-860-001-A EIS Start Procedure
Ref. 31-60-00-860-002-A EIS Stop Procedure
3. Job Set-up
SUBTASK 26-10-00-861-050-A
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
about:blank 1/5
1/24/24, 11:26 PM SIF - A318 / A319 / A320 / A321 - AMM - FSN: 005 - 01-Nov-2023 - 26-10-00-740-802-A - Ground Scanning of the Cabin Interco…
SUBTASK 26-10-00-865-050-A
B. Make sure that this (these) circuit breaker(s) is (are) closed:
4. Procedure
** ON A/C FSN 002-003, 005-050
about:blank 2/5
1/24/24, 11:26 PM SIF - A318 / A319 / A320 / A321 - AMM - FSN: 005 - 01-Nov-2023 - 26-10-00-740-802-A - Ground Scanning of the Cabin Interco…
ACTION RESULT
1.In the cockpit, on the Multipurpose Co In the cockpit, on the MCDU:
ntrol and Display Unit (MCDU):
- The SYSTEM REPORT/TEST FIRE PR
OT menu page comes into view.
- Push the line key adjacent to the S - The CIDS-SDF page comes into view
MOKE indication. and shows:
SDF1
SDF2.
On the MCDU: On the MCDU:
- Push the line key adjacent to SDF1 - The CIDS-SDF1 main menu comes i
indication. nto view.
2.On the MCDU: On the MCDU:
- Push the GND SCANNING select ke - The CIDS-SDF1 GROUND SCANNING
y. menu page comes into view.
- Wait for approximately 3 minutes. - After approximately 3 minutes, the
message NO FAULT DETECTED is sh
own.
3.On the MCDU: On the MCDU:
- Push the RETURN line select key u - The SYSTEM REPORT/TEST FIRE PR
ntil the SYSTEM REPORT/TEST FIR OT menu page comes into view.
E PROT menu page comes into vie
w.
about:blank 3/5
1/24/24, 11:26 PM SIF - A318 / A319 / A320 / A321 - AMM - FSN: 005 - 01-Nov-2023 - 26-10-00-740-802-A - Ground Scanning of the Cabin Interco…
ACTION RESULT
1.In the cockpit, on circuit-breaker pane In the cockpit, on the MCDU:
ls 49VU and 122VU:
Open, safety and tag the circuit breaker - CIDS-SDF1 is de-energized.
(s) that follow(s). Use the SAFETY CLIP
- CIRCUIT BREAKER as necessary.
- Open these CIDS-SDF1 circuit brea
kers in this sequence: circuit break
er 15WH then circuit breaker 17W
H.
- Wait for 10 seconds after you open
the circuit breakers.
2.On the MCDU: On the MCDU:
- Push the line key adjacent to the S - The CIDS-SDF page comes into view
MOKE indication. and shows:
SDF1
SDF2.
On the MCDU: On the MCDU:
- Push the line key adjacent to SDF2 - The CIDS-SDF2 main menu comes i
indication. nto view.
3.On the MCDU: On the MCDU:
- Push the GND SCANNING select ke - CIDS-SDF2 GROUND SCANNING me
y. nu page comes into view.
- The message SDF2(102RH)-DIR1(10
1RH) or CIDS(101RH)-SDF1 BUS/CI
DS(102RH)-SDF2 is shown.
- The message CIRCUIT BREAKER 15
WH/WRG:CAN BUS A is shown.
about:blank 4/5
1/24/24, 11:26 PM SIF - A318 / A319 / A320 / A321 - AMM - FSN: 005 - 01-Nov-2023 - 26-10-00-740-802-A - Ground Scanning of the Cabin Interco…
ACTION RESULT
5.In the cockpit, on circuit-breaker pane In the cockpit, on the MCDU:
ls 49VU and 122VU:
Remove the SAFETY CLIP - CIRCUIT BRE - CIDS-SDF1 is energized again.
AKER and the tag(s) and close this (thes
e) circuit breaker(s):
- 15WH on panel 49VU
- 17WH on panel 122VU.
5.
** ON A/C FSN 002-050
Close-up
SUBTASK 26-10-00-862-050-A
A. Close Access
(1) Put the aircraft back to its initial configuration.
(2) Do the EIS stop procedure
Ref. AMM TASK 31-60-00-860-002.
(3) De-energize the aircraft electrical circuits
Ref. AMM TASK 24-41-00-862-002.
about:blank 5/5