You are on page 1of 1

W I L K I N S O N H E AV Y P R E C A S T L I M I T E D

PRECAST OIL INTERCEPTOR MODEL 575


DUNDAS, ONTARIO 905-628-5611
(Formerly MODEL 260) www.wilkinsonheavyprecast.com
CONSTRUCTION DETAILS *
Concrete: 50 MPa High Density Concrete at 28 Days, 5 to 8% Air Entrainment.
(Highly Resistant To Oil Absorbtion) NOTES
Reinforcing: 4 x 4 6/6 ww mesh in roof, walls, partition and floor . 1. Standard access openings are 495 mm diameter.
Eight extra 10 M bars around each roof access opening. 2. Typical precast concrete access extension with cast iron bolted and
Minimum cover over reinforcing steel - 25 mm. gasketed frame and cover. See 'RISERS & ACCESS COVERS FOR
Weight: 6890 kg (Not Including Risers) INTERCEPTORS' for other styles of cover.
3. Flexible watertight pipe connectors to accommodate 100 mm diameter
Capacity To Liquid Level: 2627 Litres PVC pipe; three inlet and one outlet position.
Maximum Flow Rate: 60 Litres Per Minute for the separation of unemulsified oil. 4. 100 mm PVC piping is standard - galvanized or stainless steel piping are
available options.
5. Vent knockouts each side of each chamber suitable for 75 mm pipe.
6. The partitions are cast monolithically with the walls and roof.
7. Heavy lifting eyes in the roof four places.
• This interceptor is NOT intended for use in Stormwater applications.
Interceptor • The performance data shown for this quiescent-type separator involves
C
L the following parameters:
- the influent is water and free oil at a temperature of 20˚ Celcius.
- the oil has a specific gravity of .9 and a minimum oil droplet size of
60 microns.

290 Note 7

Note 2
Variable

140

140
Note 1
Note 3
Note 3
125
Inlet
Invert Outlet
Invert
Note 5 Clean
Out 1700
1500
1450 1200
Liquid 1375
1375
Depth
Note 4

Note 4

150 Note 6

200
100

100
75

75

Dimensions in mm
100

100

100

100
1000 1000 1000 800
75

75

N.T.S.
3500 1200

* Commensurate with a 2 Metre burial in firm soil in an area of occasional or intermittent passenger vehicle traffic.
Please consult with the factory before specifying this product for use in an area of heavy wheel loading.

WARNING ! IMPROPER INSTALLATION ESPECIALLY IN UNSTABLE SOILS CAN RESULT IN THE STRUCTURAL FAILURE OF THIS PRODUCT 129 February
May, 20092010

You might also like