Professional Documents
Culture Documents
Hop So
Hop So
id094000003700
1. Remove the front scuff plate.(LH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
2. Remove the front side trim.(LH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
3. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference). (See
Terminal Voltage Table (Reference).)
• If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection
item(s) and related wiring harnesses.
― If the system does not work normally even though the inspection items are normal, identify the
malfunctioning location according to the directions in [DIAGNOSTIC SYSTEM] and [SYMPTOM
TROUBLESHOOTING] then perform repairs.
ELECTRICAL SUPPLY UNIT (ESU)
WIRING HARNESS SIDE CONNECTOR
1G 1E 1C 1A 2P 2M 2J 2G 2D 2A
2Q 2N 2K 2H 2E 2B
1H 1F 1D 1B
2R 2O 2L 2I 2F 2C
4I 4G 4E 4C 4A
3D 3C 3B 3A 4J 4H 4F 4D 4B
am2zzw00014428