Website https:// www.clint.it www.noavairinternational.com.my Factory location Address, country Malaysia Delivery period ? weeks 6/8 weeks After service Branch office Country / City Malaysia Quality control Assembly Test (Final test) What test fanufacture do ? visyual check Leakage Test Where and when checked ? eurovent certification Production skill EEV built-in assembly Possible or Not out of scope How to check the leakage from AHU product on production line Installed location of EEV (Own factory / 3rd supplier)
Tube diameter φ9.52("3/8), φ12.7("1/2) , "3/8
φ15.7("5/8) Fin pitch Free write alluminium Fan motor brand Free write teco/alliance Panel SPEC Double skin or Single skin or Both double skin Design knowledge Pre-cooled heat exchanger Possible or Not possible, need to add accessories based on your specs Heat recovery Possible or Not possible, need to add accessories based on your specs Humidity control Possible or Not possible, need to add accessories based on your specs VSD fan motor Possible or Not possible, need to add accessories based on your specs Experience to use other brand Free write Special design Hospital AHU, Possible Humidity possible, need to add accessories based on your specs control, etc. Others Factory certification ISO ISO 9001/2015 Product certification Eurovent / AHRI / JIS etc. eurovent certification Test facility Calorimeter type / Max Capacity and our quotation include only AHU so only visual check because temp. possible to measure condenser units are supplied from third parties