Professional Documents
Culture Documents
P-3657 - Bill 4 Mep Java
P-3657 - Bill 4 Mep Java
JUMLAH : Rp 1,917,318,000.00
PPN 10 % : Rp 191,731,800.00
JUMLAH TOTAL : Rp 2,109,049,800.00
DIBULATKAN : Rp 2,109,000,000.00
TERBILANG :
DUA MILYAR SERATUS SEMBILAN JUTA RUPIAH
Novi Efendi
Direktur Utama
TeamworX
to the proposed
BILL NO.4.5. COLD, WASTE WATER & VENT INSTALLTION Rp. 15,626,000Rp.
Rp.
Rp.
Rp.
Rp.
Rp.
Supply and install the following sprinklers pipes and fittings comply with ASTM
A 53 Grade A SCH 40 , fixed in position jointed with approved method including
all support, hanger, brecket painting and all necessary accessories all in
accordance to the technical specification dan drawings
Item BILL 4 MECHANICAL and BILL NO.4.2. ELECTRICAL Qty Unit Rate Rupiahs
ELECTRICAL INSTALLATION INSTALLATION
No.
B DP QC 1 nr 35,000,000 35,000,000
Supply and Install the following Distribution Cables run and fixed on
cable ladders / tray including gland, termination, erthing,supporting
and all necessary fixing accessories, acordan to the technical
specification and as shown on drawings
From DP - QC
GROUNDFLOOR
A FL LED 2 x 18 W 18 nr 2,700,000 48,600,000
1ST FLOOR
I FL LED 2 x 18 W 11 nr 2,700,000 29,700,000
Supply and install the final sub circuit cabe to lighting, NYM 3 x 2,5 mm²
in PVC high impact conduit lay on tray including connection, termination kit
and all necessary accessories, all in acoding to the technical specification and
and shown on drawings.
1ST floor
SUMMARY
A Modification TBFA LAB c/w Control module, monitor module 1 nr 80,000,000 80,000,000
Supply and install the following final sub circuit cable in high impact conduit
lay on tray includng termination and all necessary accessories, all in
acordance to the technical specification and shown on drawings
Supply and install the following final sub circuit cable in high impact conduit
lay on tray including termination and all necessary accessories, all in
accordance to the technical specification and shown on drawings
CABLE TRAY
Collection
4.4.1 EQUIPMENT
R Liquid dia 9.5 mm + gas dia 15.9mm FCU 4-1-1 15 m 1,250,000 18,750,000
S Liquid dia 9.5 mm + gas dia 15.9mm FCU 4-1-2 13 m 1,250,000 16,250,000
FCU 4-1-01
Suplly Duct
Fresh Duct
FCU 4-1-02
Suplly Duct
EF 4 - 1 - 01
Exhaust Air Duct
Collection
EQUIPMENT Rp 235,500,000
Supply and install the following cold water pipes and fittings, GIP medium
fixed in position jointed with approved method , including jacketing
insulation, brackets, hangers, support and all fixing accessories as
specified in the technical specification and shown on drawing.
Supply and install the following cold water pipes and fittings, PVC
fixed in position jointed with approved method , including jacketing
insulation, brackets, hangers, support and all fixing accessories as
specified in the technical specification and shown on drawing.
A Allow for obtaining all necessary Government permits, 1 item 58,000,000 58,000,000
approvals and operating licences as specified
C Allow for partial testing, pressure test for all pipes and purging 1 item 30,000,000 30,000,000
D Allow for testing, acceptance testing and commisioning 1 item 15,000,000 15,000,000
E Allow for training Employer's staff in operation and maintenence 1 item 60,000,000 60,000,000
procedures
F Allow for providing set of tools and service requirment as specified 1 item 12,000,000 12,000,000