Professional Documents
Culture Documents
Beam clamps
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or
welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use
with our channels and offer many installation advantages.
(unless noted)
Foot/Lbs. 4 5 11
See chart on page 106 for recommended Nm 5 7 15
torquing of bolts (not setscrews).
Setscrew Size 5
/8"-11 /4"-10
3
Foot/Lbs. 21 34
Nm 28 46
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
Rod Size
C A
Beam Clamps
B351L-3/4 * 3
/4"-10 23/8" (60.3) 31/4" (82.5) 3
/4" (19.0) 13/8" (34.9) 630 (2.83) 71 (32.2)
B351L-7/8 7
/8"-9 3" (76.2) 31/4" (82.5) 1" (25.4) 17/8" (47.6) 1200 (5.34) 184 (83.4)
Rod Size B
A
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 155 Eaton
Beam clamps
C
B3033 D
Throat Openings
Reversible Wide Jaw Wedge C-Clamp
11/4" (31.7) For
(Malleable Iron) 3
/8 & 1/2 Sizes
• afety Factor of 5
S 1 /16" (33.3) For
5
• Setscrew and locknut included B
5
/8 & 3/4 Sizes
• Material: Malleable iron
• Standard finishes: HDG with ZN hardware, PLN
Rod
Rod B C D Design Load Wt./C UL Max. Throat
Size
Part No. Size Pipe Size Opening
A
A In. mm In. mm In. mm Lbs. kN Lbs. kg In. mm
B3033-3/8 3
/8"-16 21/4" (57.1) 2" (50.8) 11/8" (28.6) 500 (2.22) 46 (20.8) 4" (100)
B3033-1/2 1
/2"-13 25/16" (58.7) 23/16" (55.5) 11/4" (31.7) 810 (3.60) 64 (29.0) 8" (200)
B3033-5/8 5
/8"-11 25/8" (66.7) 21/2" (63.5) 13/8" (34.9) 1000 (4.48) 116 (52.6) 8" (200)
B3033-3/4 3
/4"-10 211/16" (68.3) 21/2" (63.5) 17/16" (36.5) 1400 (6.22) 140 (63.5) 10" (250)
B3034 C
Wedge C-Clamp D
Beam Clamps
• afety Factor of 5
S Note:
• /4" (19.0) Max. flange thickness
3 3
/8" & 1/2" Sizes
• Setscrew and locknut included Are Reversible * 3/8 & 1/2 Sizes Only B
• Material: Malleable iron Style
• Standard finishes: HDG with ZN hardware, PLN
Rod
Rod B C D Design Load Wt./C UL Max. Size
Part No. Size Pipe Size A
A In. mm In. mm In. mm Lbs. kN Lbs. kg In. mm 3
/4" (19.0)
B3034-3/8* 3
/8"-16 15/8" (41.3) 2" (50.8) 7
/8" (22.2) 560 (2.49) 54 (24.5) 4" (100) Max.
Flange
B3034-1/2* 1
/2"-13 113/16" (46.0) 23/16" (55.5) 13/16" (30.2) 810 (3.60) 51 (23.1) 8" (200)
Thickness
B3034-5/8 5
/8"-11 13/4" (44.5) 21/8" (54.0) 11/8" (28.6) 1000 (4.48) 70 (31.7) — —
B3034-3/4 3
/4"-10 2" (50.8) 21/4" (57.2 11/8" (28.6) 1500 (6.67) 98 (44.4) — —
Reference page 154 for general fitting and standard finish specifications.
Eaton 156 B-Line series strut systems
Beam clamps
11/16"
Fig. 65XT Rod Size (27.0)
Reversible C-Type Beam Clamp 3
/8"-16
15/8"
• afety Factor of 5
S (41.3)
/4" (19.0)
3
• /4" (19.0) Max. flange thickness
3
Max.
• Setscrew and locknut included
Flange
• Maximum pipe size 4" (100)
Thickness
• Design Load 610 Lbs. (2.71kN)
• Material: Steel 7
/8"
• Standard finishes: ZN, PLN (22.2)
11/2"
(38.1)
Fig. 65
Reversible Steel C-Type Beam Clamp - TD
TD W
3
/4" (19.0mm) Throat Opening W
Setscrews and
Fig. 66 locknuts included
Reversible Steel C-Type Beam Clamp - H H
11/4" (31.7mm) Throat Opening
3
/4"
Beam Clamps
• afety Factor of 5
S 11/4"
(19.0) (31.7)
• Maximum pipe size 4" (100) for 3/8"-16 rods
• Maximum pipe size 8" (100) for 1/2"-13 rods
• Material: Steel
SS SS
• Standard finishes: ZN, PLN BD
BD
Fig. 65 Fig. 66
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 157 Eaton
Beam clamps
B3037Z
Z-Purlin C-Clamp 3"
•D esign Load 500 Lbs. (2.22 kN) (76.2)
• Safety Factor of 5
• Designed for attaching a 3/8"-16 hanger rod
to the bottom flange of a Z-purlin
313/32"
• Setscrew and locknut included (86.5)
• Material: Malleable iron
• Standard finishes: ZN, PLN
Bottom Hanger
Rod Threads
3
/8"-16
B444
Series Rod Support
Beam Clamps
• Safety Factor of 5
• Max. flange thickness A
3
/4" (19.0) for 1/4 & 5/16 sizes (Bottom &
1" (25.4) for 3/8 & 1/2 sizes Back)
• Setscrew included
• Material: Malleable iron
• Standard finish: ZN, available in HDG with CZ Hardware D
C
Thread Set C D Design Load Wt./C
Part No. Size A Screw In. mm In. mm Lbs. kN Lbs. kg
B444- /4
1 1
/4"-20 1
/4"-20 1 /8"
3
(34.9) 1 /16"
3
(30.1) 150 (.66) 24 (10.9)
B444-5/16 /16"-18
5 1
/4"-20 13/8" (34.9) 13/16" (30.1) 150 (.66) 23 (10.4)
B444-3/8 3
/8"-16 1
/2"-13 17/8" (47.6) 2" (50.8) 350 (7.12) 65 (29.5)
B444-1/2 1
/2"-13 5
/8"-11 23/8" (60.3) 21/2" (63.5) 1000 (4.45) 132 (59.9)
BC442 13
/16"
Light Duty Beam Clamp (20.6)
B210 B210A
Beam Clamp Beam Clamp
3
/4" (19.0)
/8" (15.9)
5
Max. Flange
• Design Load Max. Flange /8"
3 • Design Load
1
/4"
Thickness (6.3)
800 Lbs. (3.56 kN) Thickness (9.5) 300 Lbs. (1.33 kN)
• Safety Factor of 5 • Safety Factor of 5
• 5/8" (15.9) Max. flange thickness • 3/4" (19.0) Max. flange thickness
• 1/2"-13 Setscrew included • 3/8"-16 Setscrew included 1
/2"
• Standard finish: ZN 3
/4" • Standard finish: ZN
3
/8"-16 (12.7)
• Wt./C 100 Lbs. (45.3 kg) 1/2"-13 (19.0) • Wt./C 60 Lbs. (27.2 kg) Tap
Bottom 2"
Tap Plate (50.8) 11/2"
Bottom 2" Only (38.1))
Plate Only (50.8) 11/2"
(38.1)
Reference page 154 for general fitting and standard finish specifications.
Eaton 158 B-Line series strut systems
Beam clamps
B303 thru B309 Beam Clamps
• afety Factor of 5
S
• Max. flange thickness 1/16" (1.6) thru 7/8" (22.2)
• Setscrew included T
• When retaining strap is required, order B312 separately 11/8"
• Recommended setscrew torque: 3/8"-16 150 in-lbs. (16.9 N•m) (28.6)
1
/2"-13 350 in-lbs. (39.5 N•m) Max. Flange
• Standard finishes: ZN, HDG Thickness
C
Beam Clamps
B309 5
/8"-11 1
/2"-13 29/16" (65.1) 1
/4" (6.3) 1500 (6.67) 133 (60.3)
A
Thread Setscrew C D Design Load Wt./C
Part No. Size A Size In. mm In. mm Lbs. kN Lbs. kg
B321-1 3
/8"-16 1
/2"-13 3 /16"
9
(92.1) 1
/4" (6.3) 1300 (5.78) 187 (84.8)
B321-2 1
/2"-13 1
/2"-13 39/16" (92.1) 1
/4" (6.3) 1400 (6.23) 186 (84.3)
B321-3 5
/8"-11 1
/2"-13 39/16" (92.1) 1
/4" (6.3) 1600 (7.12) 185 (83.9)
B321-4 5
/8"-11 5
/8"-11 323/32" (94.4) 5
/16" (7.9) 1800 (8.00) 239 (108.4)
B321-5 3
/4"-10 5
/8"-11 323/32" (94.4) 5
/16" (7.9) 2000 (8.89) 238 (107.9)
B312 Series
Retaining Strap for use with
B303 thru B309 and B321 Series
• /4" (19.0) Max. flange thickness
3
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 159 Eaton
Beam clamps
B751 B752
Beam Clamp Beam Clamp Swivel
• afety Factor of 5
S • esign Load 500 Lbs. (2.22 kN)
D
• /4" (19.0) Max. flange thickness
3
• Safety Factor of 5
• Setscrew and locknut included • Material: 12 gauge (2.6)
• Maximum ATR size 1/2" • Use B753 Swivel nut (not included)
• Use B753 Swivel nut (not included) • Includes: B751 Clamp (Not
• Material: 12 gauge (2.6) 1 pc. B752 Swivel body Included)
• Standard finish: ZN, HDG 1 pc. 5/16"-18 x 13/4" HHCS
• Wt./C 42 Lbs. (19.0 kg) 1" 1 pc. /16"-18 Hex nut
5
2"
(50.8) (25.4) • Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg)
Overall
3" Height
(76.2) 31/4"
(82.5)
B751-J_-3/8
Beam Clamp Assembly
• Includes:
1 pc. B751 Beam clamp B701-J_-3/8 J-Hook
1 pc. B701 Type J-Hook only
1 pc. SA203-158 Clip
1 pc. 3/8"-16 Hex Nut
• 1/4" (6.3) Diameter J-Hook available upon request
Part Number changes to B751-J_-1/4 and a 1/4-20
machine square nut (MSQN) is used
B751 Clamp
• Use B753 Swivel Nut (not included)
• Standard finishes: ZN
SA203-158 Clip
A TL
/8"-16 Hex Nut
3
Reference page 154 for general fitting and standard finish specifications.
Eaton 160 B-Line series strut systems
Beam clamps
B755 B756-3/8
3
/8 Beam Clamp Swing Connector
• afety Factor of 5
S • esign Load 150 Lbs. (0.66 kN)
D
• /8" (15.9) Max. flange thickness
5 3
/8"-16 Square • Safety Factor of 5
• For 3/8"-16 Hanger rod only Machine Nuts • Material: 12 gauge (2.6) B755 Clamp
• Material: 12 gauge (2.6) • Includes: (Not Included)
• Includes: 1" 1 pc. B756-3/8 Swing
1 pc. B755 Beam clamp (25.4) connector body
1 pc. 3/8" x 2" Square head 1 pc. 5/16"-18 x 11/4" SHHMS
setscrew 1 pc. 5/16"-18 Square nut
2 pcs. 3/8" Square nut 21/2" • Use B753 Swivel nut (not included)
• Standard finish: ZN (60.3) • Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg) • Wt./C 15 Lbs. (6.8 kg)
3
/8" (9.5) Hole For Overall
Swing Connector 7
/8" Height
(22.2) 17/8"
3
/8"-16 Rod (47.6)
Design Load Design Load
150 Lbs. (0.66 kN) 300 Lbs. (1.33 kN)
Beam Clamps
B755-3/8 -J_
Beam Clamp Assembly
• I ncludes: B755 Clamp
1 pc. B755-3/8 Beam clamp
1 pc. B705 Type J-Hook only
1 pc. B705 Clip
1 pc. 1/4"-20 Square nut
• Standard finish: ZN B705-J_
J-Hook Only
B705 Clip
B705 Series
J-Hook B705-J_
•U se with B755-3/8 J-Hook Only
• Standard finish: ZN
B705 Clip
A /4"-20
1
Machine Nut
TL
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 161 Eaton
Beam clamps
B750 Series
Beam Clamp 1
/2"-13 Rod
• afety Factor of 5
S & Hex
• Design Load 500 Lbs. (2.22 kN) Nut Sold
• Recommended Torque: J-Hook nut 125 in-lbs. (14.1 N•m) Separately
• Maximum flange thickness 5/8" (15.9)
• Standard finish: ZN
7 Ga
(4.6)
B700 Series
J-Hook
• I ncludes:
1 pc. J-Bolt 1
/2"-13
1 pc. Hex Nut
Threads
• Maximum flange thickness 5/8" (15.9)
• Standard finish: ZN
TL
A
A Thread Length TL Wt./C
Part No. In. mm In. mm Lbs. kg
B700-J4 81/2" (215.9) 63/4" (171.4) 44 (19.9)
B700-J6 111/2" (292.1) 93/4" (247.6) 53 (24.0)
B700-J9 141/2" (368.3) 123/4" (323.8) 63 (28.6)
B700-J12 171/2" (444.5) 153/4" (400.0) 78 (35.4)
B500 Series
Square U-Bolt
• I ncludes:
1 pc. U-Bolt only
2 pcs. 3/8"-16 Hex nuts
• Additional sizes available
121/32"
• Standard finish: ZN, SS4 (42.0)
21/2"
(63.5)
A
3
/8"-16
Threads
Reference page 154 for general fitting and standard finish specifications.
Eaton 162 B-Line series strut systems
Beam clamps
B441-22 B441-22A B314
Beam Clamp Beam Clamp Beam Clamp
•D esign Load 1850 Lbs. (8.23 kN) •D esign Load 1850 Lbs. (8.23 kN) •D esign Load 900 Lbs. (4.00 kN) when
when used in pairs when used in pairs used in pairs
• Safety Factor of 5 • Safety Factor of 5 • Safety Factor of 5
• 3/4" (19.0) Max. flange thickness • 3/4" (19.0) Max. flange thickness • 5/8" (15.9) Max. flange thickness
• For use with 13/16" (20.6) to 15/8" (41.3) • For use with 15/8" (41.3) to 31/4" (82.5) • For use with channel 15/8" (41.3)
high channel high channel in height
• Recommended Torque: 150 in-lbs. • Recommended Torque: 150 in-lbs. • Setscrew included
(16.9 N•m) (16.9 N•m) • Sold in pieces
• Sold in pieces • Sold in pieces • Standard finishes: ZN, GRN, HDG, SS4
• Other flange thickness variations are • Other flange thickness variations are • Wt./C 105 Lbs. (47.6 kg)
available, contact us for sizes available, contact us for sizes
• Standard finishes: ZN, HDG, SS4 • Standard finishes: ZN, HDG, SS4
• Wt./C 87 Lbs. (39.4 kg) • Wt./C 93 Lbs. (42.2 kg)
Beam Clamps
3" 17/8"
3" 17/8" (76.2) (47.6)
(76.2) (47.6)
1" 13/4"
33/8" (25.4) (44.1) 37/16"
1" 5" (87.3) 13/4"
(85.7) (25.4) (127.0) /4"
1
(6.3) (44.1)
1
/4"
(6.3)
1
/4"
(6.3)
B441Z-22 B441Z-22A
Beam Clamp Beam Clamp
• esign Load 1200 Lbs. (5.34 kN) when used in series
D • esign Load 1200 Lbs. (5.34 kN) when used in series
D
• Safety Factor of 5 • Safety Factor of 5
• Sold in pieces • Sold in pieces
• For use with 13/16" (20.6) to 15/8" (41.3) high channel • For use with 15/8" (41.3) to 31/4" (82.5) high channel
• Recommended Torque:150 in-lbs. (16.9 N•m) • Recommended Torque:150 in-lbs. (16.9 N•m)
• Standard finishes: ZN • Standard finishes: ZN
• Wt./C 95 Lbs. (43.1 kg) • Wt./C 101 Lbs. (45.8 kg)
1" 1"
(25.4) (25.4)
3" 3"
(76.2) (76.2)
1
/4"
(6.3)
45/8"
(117.5) 45/8"
/4"
1 (117.5)
23/4" (6.3)
(69.8)
43/8"
(111.1)
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 163 Eaton
Beam clamps
B211 Zee Beam Clamp B213 I-Beam Clamp
• esign Load 600 Lbs. (2.67 kN) when used in pairs
D • esign Load 900 Lbs. (4.00 kN) when used in pairs
D
• Safety Factor of 5 • Safety Factor of 5
• 1" (25.4) Max. flange thickness • 7
/8" (22.2) Max. flange thickness
• 1
/2"-13 Setscrew included • 1
/2"-13 Setscrew included
• Sold in pieces • Sold in pieces
• Order 1/2"-13 HHCS and channel nut separately • Order 1/2"-13 x 21/4" HHCS and channel nut separately
• Standard finishes: ZN, HDG • Material: Malleable iron
• Wt./C 66 Lbs. (29.9 kg) 11/2" • Standard finishes: ZN, GRN
(38.1) • Wt./C 95 Lbs. (43.1 kg)
11/2"
3
/8" (38.1)
(9.5)
31/4"
(82.5)
21/2"
(63.5)
Beam Clamps
127/32" 2"
(46.8) (50.8)
1
/4" 11/4"
(6.3) (31.7)
11/4" (31.7)
I.D. 3
/8"
3
/8" Thick (9.5) 11/4"
(9.5) (31.7)
27/8"
(73.0)
2" 2"
(50.8) 11/4" (50.8)
(31.7)
Reference page 154 for general fitting and standard finish specifications.
Eaton 164 B-Line series strut systems
Beam clamps
B427
Beam Clamp
• esign Load 1100 Lbs. (4.89 kN) when used in pairs
D
• Safety Factor of 5
• 21/2" (63.5) Max. flange thickness without channel 10°
• 1
/2"-13 x 11/2" Setscrew included
• Sold in pieces
• Standard finish: ZN 2 Holes
• Wt./C 92 Lbs. (41.7 kg) /16" (14.3)
9
27/8" Dia.
(73.0)
2" 11/2"
3
/8" (50.8) (38.1)
(9.5)
B405 B405A
Beam Clamps
Suspension Member Suspension Member
•S tandard finishes: ZN, GRN with Beam Clamp
• Wt./C 75 Lbs. (34.0 kg) • 7/8" (22.2) Max. flange thickness
• Includes:
37/16" 1 pc. B405 Suspension member
(87.3) I.D. 1 pc. B213 I-Beam clamp
1
/4" 1 pc. 1/2"-13 x 21/2" HHCS
(6.3)
1 pc. 1/2"-13 Hex Nut
• Material: Malleable iron
111/16" • Standard finishes: ZN, GRN
(42.9) • Wt./C 183 Lbs. (83.0 kg) 37/16"
I.D. (87.3)
111/16"
(42.9)
17/8"
17/8" (47.6)
(47.6)
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 165 Eaton
Beam clamps
B760-22 Series
Beam Clamp B760-22A Series
Beam Clamp
• 1" (25.4) Max. flange thickness
• 1" (25.4) Max. flange thickness
• For use with 13/16" (20.6) to 15/8" (41.3) high channel
• For use with 15/8" (41.3) to 31/4" (82.5) high channel
• Recommended Torques:
• Recommended Torques:
U-Bolt nuts 150 in-lbs. (16.9 N•m) 5"
J-Hook nut 60 in-lbs. (6.8 N•m) U-Bolt nuts 150 in-lbs. (16.9 N•m)
33/8" (127.0)
• Includes: (85.7) J-Hook nut 60 in-lbs. (6.8 N•m)
1 pc. B760 Plate • Includes:
1 pc. B701 Type 1 pc. B760 Plate
J-Hook only 1 pc. B701 Type
1 pc. B500-33/8" J-Hook only
U-Bolt only 1 pc. B500-5"
3 pcs. 3/8"-16 Hex nuts U-Bolt only
1
/4" 1
/4"
• Standard finish: ZN 3 pcs. 3/8"-16 Hex nuts (6.3)
(6.3)
• Standard finish: ZN
3" 3"
(76.2) (76.2)
Beam Clamps
3
/8" (9.5) Dia. 3
/8" (9.5) Dia.
J-Hook and J-Hook and
Hex Nut Hex Nut
For Flange Width /
Wt. C For Flange Width /
Wt. C
3" 3
/8" (9.5) 3" 3
/8" (9.5)
(76.2) ATR and Hex Nut (76.2) ATR and Hex Nut
For Flange Width ATR Length Wt./C For Flange Width ATR Length Wt./C
Part No. In. mm In. mm Lbs. kg Part No. In. mm In. mm Lbs. kg
B761-22-4 4"-57/8" (101.6-149.2) 4" (101.6) 202 (91.6) B761-22A-4 4"-57/8" (101.6-149.2) 4" (101.6) 216 (98.0)
B761-22-6 6"-87/8" (152.4-225.4) 6" (152.4) 206 (93.4) B761-22A-6 6"-87/8" (152.4-225.4) 6" (152.4) 220 (99.8)
B761-22-9 9"-117/8" (228.6-301.6) 9" (228.6) 214 (97.0) B761-22A-9 9"-117/8" (228.6-301.6) 9" (228.6) 228(103.4)
B761-22-12 12"-147/8" (304.8-377.8) 12" (304.8) 221(100.2) B761-22A-12 12"-147/8" (304.8-377.8) 12" (304.8) 235(106.6)
Reference page 154 for general fitting and standard finish specifications.
Eaton 166 B-Line series strut systems
Beam clamps
B614 B613 B613A
Column Support for B22 Column Support for B22 Column Support for B52
•Q uick installation (one bolt to tighten) •D esign Load 800 Lbs. (3.56 kN) slip •D esign Load 800 Lbs. (3.56 kN) slip
• Design Load 800 Lbs. (3.56 kN) slip with Safety Factor of 3 with Safety Factor of 3
with Safety Factor of 3 • Use with B22 and B24 channel • Use with B52 and B54 channel
• Use with B22 and B24 channel • Setscrews to be torqued to 19 ft./Lbs • Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs • Sold in pairs • Sold in pairs
• Standard finish: ZN • Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN, HDG
• Wt./C 50 Lbs. (22.6 kg) • Wt./C 100 Lbs. (45.3 kg) • Wt./C 100 Lbs. (45.3 kg)
15/8"
(41.3) 15/8"
(41.3)
31/2" 31/2"
(88.9) (88.9)
Beam Clamps
3
/8" x 2" 3
/8" x 2" Cone
Cone Point Point
Setscrews Setscrews
B422 Series
Right Angle Clamp
•S afety Factor of 5
• Material: 7 gauge (4.5)
• Standard finishes: ZN, SS4
B107S B593
U-Support Clevis Swivel
•M aterial: 7 gauge (4.5) • I ncludes:
• Standard finishes: ZN, GRN 1 pc. 3/8"-16 x 2" HHCS
• Wt./C 51 Lbs. (23.1 kg) 1 pc. 3/8"-16 Hex Nut
• Material: 11 gauge (3.0)
33/4" • Standard finishes: ZN, GRN
(95.2) • Wt./C 31 Lbs. (14.0 kg)
13/8"
1" (34.9) 17/16"
(25.4) (36.5)
Reference page 154 for general fitting and standard finish specifications.
B-Line series strut systems 167 Eaton