Professional Documents
Culture Documents
Bbs Lintel
Bbs Lintel
2 EXCAVATION WORK
Earth work in excavation below existing ground level in foundations, trenches, in all class
of soil / murrrum except rock up to a depth of 1.50 mtrs. Including shoring, strutting,
dewatering, and disposing off the un useful soil outside the plot boundary complete as
directed by Engineer IN charge.
a ( upto 1.50 )
Do--- as above in depth 0 mtrs. To 1.50 mtrs. 1284.86 cmt. 0.00
b ( upto 3.00 )
Do--- as above in depth 1.50 mtrs. To 3.00 mtrs. 905.15 cmt. 0.00
c Do--- as above in depth 3.0 mtrs. To 4.50 mtrs. R/O cmt.
4 Metalling [ 63-90 mm ]
Providing and laying metal (size 63mm x 90mm) in a layer of 175mm each well
compacted with power roller without damaging foundation filling voids with quarry dust,
watering, ramming, compacting if required for edges and corners use plate compactor 827.28 cmt 0.00
etc. complete as directed by Engineer In charge.
PAGE NO:1
8 REINFORCEMENT STEEL FE 500
Providing & Supplying & fixing in position High yield deformed bar Reinforcement
confirming to IS – 1139 or cold Twisted bars, TOR steel / TMT / or Equivalent
Reinforcement bars confirming to IS – 1786 for RCC construction including transporting
(i.e. loading & unloading) the steel from store/issue points to site of works including
unloading from Trucks/Trailers, cleaning, de coiling, cutting, bending to required shape
and lengths as per detailed drawing, binding with 16 SWG black soft annealed binding
wire, placing with proper cover block, support chairs, overlap, spacers, etc. complete in all
respect as directed by Engineer IN charge in foundation and up to Plinth level.
9 SHUTTERING
Providing and erecting in position form work with plate shuttering materials of
approved quality for all type of concrete elements vertical, horizontal or inclined including
scaffolding, stagging, fasteners,locking ,Ties at respective levels necessary nails, wires,
locking pins,Guggus etc keeping in position till concrete is laid and members have 1342.63 sqm 0.00
acquired required strength, removal thereafter, applying shuttering oil etc. complete as
directed by Engineer-in-Charge.
13 Groove cutting
Providing and constructing groove cutting of size 5mm x 50mm deep for floor , including
saw cutting of concrete floors / pavement to the required depth, filling the same with 2068.20 rmt 0.00
polysulpide, etc. complete.as per instruction of Engg in charge.
15 GP2 Grouting
Filling the gap between RCC column, base plate and floor with GP2 Grout of M45 I S I
grout to consume shall confirm to company Equavalient of SIKA make / Fair mate / Dr.
fixit etc. as per I S Specification including the all the over head expesnes and the edges 3.24 cmt 0.00
shall be shampered etc completed as directed by Engineer Incharge.
16 Re-bar
Providing, drilling & fixing anchor bars in concrete using Hilti HY-150 chemical grout as
per as per manufacturer's specifications. [ necessary pull out test --if recommended by
consulltant have to be proved , which rate shall not be extra paid etc complete as
directed by engg. incharge .
PAGE NO:2
a 8mm dia #NAME? NOS #NAME?
b 16mm dia 110.00 NOS 0.00
PAGE NO:3
LINTEL BEAM
Sr.
Particular
no. L B H
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
2 LB2 (SIZE IN METER) 7.112 0.230 0.150
→
Number of beams 12.000
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
BAR BENDING SCHEDULE - LINTEL
Dia of
No. of No. of
Shape of Bar Bar in
bar item
mm
0.250 3.062
0 2 16
0.180
0.075 8 42 16
0.180 0.075 0.180
0.180
0.150 0.530 10 15 16
0.100
0.530
8 4 16
2.113
0.250 3.531
0 2 12
0.180
0.075 8 48 12
0.100 0.075 0.100
0.180
0.150 0.530 10 15 12
0.100
0.530
8 4 12
2.113
NG SCHEDULE - LINTEL
Weig
Total wt
Spacing in Length in Total length
8mm Total wt 10mm
mtr mtr in mtr
(0.395 (0.617 kg/mt)
kg/mt)
6.625 212.000 - -
6.625 318.000 - -
3.312 106.000 - -
7.562 181.488 - -
3.781 90.744 - -
188.680 - - -
283.020 - - -
- - - -
- - - -
- - - -
- - - -
161.524 - - -
161.524 - - -
- - - -
- - - -
- - - -
- - - -
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
2 SB2 (SIZE IN METER) 6.360 0.230 0.150
→
Number of beams 0.000
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
→ STIRRUPS
→ CHAJJA
CHIPPIYA
DISTRIBUTION BARS
BAR BENDING SCHEDULE - LINTEL
Dia of
No. of No. of
Shape of Bar Bar in
bar item
mm
0.250 106.267
0 2 0
0.180
0.075 8 1418 0
0.050 0.075 0.050
0.180
0.250 3.155
0 2 0
0.180
0.075 8 43 0
0.100 0.075 0.100
0.180
0.150 0.530 10 61 0
0.100
0.530
8 4 0
8.900
0.250 11.150
0 2 0
0.180
0.075 8 150 0
0.180 0.075 0.180
0.180
0.250 15.475
0 2 0
0.180
0.075 8 208 0
0.180 0.075 0.180
0.180
0.250 -0.025
12 0 0
0.180
0.075 8 1 0
0.250 0.075 0.250
0.180
0.150 0.450 0 1 0
0.100
0.450
0 2 0
0.000
NG SCHEDULE - LINTEL
Weig
Total wt
Spacing in Length in Total length
8mm Total wt 10mm
mtr mtr in mtr
(0.395 (0.617 kg/mt)
kg/mt)
213.034 0.000 - -
213.034 0.000 - -
106.517 0.000 - -
22.350 0.000 - -
6.810 0.000 - -
6.810 0.000 - -
3.405 0.000 - -
8.900 0.000 - -
22.800 0.000 - -
22.800 0.000 - -
11.400 0.000 - -
22.350 0.000 - -
31.450 0.000 - -
31.450 0.000 - -
15.725 0.000 - -
31.000 0.000 - -
0.450 0.000 - -
0.450 0.000 - -
0.225 0.000 - -
0.000 0.000 - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
→ STIRRUPS
BAR BENDING SCHEDULE - SLAB BEAM
Dia of
No. of No. of
Shape of Bar Bar in
bar item
mm
0.250 -0.025
0 2 0
0.180
0.075 10 1 0
0.525 0.075 0.525
0.180
G SCHEDULE - SLAB BEAM
Weig
Total wt
Spacing in Length in Total length
8mm Total wt 10mm
mtr mtr in mtr
(0.395 (0.617 kg/mt)
kg/mt)
0.450 0.000 - -
0.450 0.000 - -
0.225 0.000 - -
- - - -
- - - -
- - - -
- - - -
1 S1 Thickness 0.115
→ Number of Slab 0.000
Straight bars Length 8.200 m
Distribuition 1 5.500 m
Distribuition 2 0.000 m
BAR BENDING SCHEDULE - SLAB
Dia of
No. of No. of
Shape of Bar Bar in
bar item
mm
0.000 0 38 0
5.500 10 28 0
0.000 12 5 0
ING SCHEDULE - SLAB
Weig
Total wt
Number of Length in Total length
8mm Total wt 10mm
bend mtr in mtr
(0.395 (0.617 kg/mt)
kg/mt)
8.350 0.000 - -
2 0.063 0.000 - -
0.000 0.000 - -
5.500 0.000 - -
0.000 0.000 - -
- - - -
- - - -
- - - -
- - - -
- - - -