Professional Documents
Culture Documents
Door Operator 2500
Door Operator 2500
Power assisted opening for Low Energy Operator Features and Options
121
convenience or for less able The standard Low Energy operator gives precise door
114
710mm control in all conditions, monitoring the door position
(FIXED OPER ATOR LENGTH)
users
and allowing simple adjustment of the door operating
parameters such as the opening and closing speeds.
33
In addition, provision is made for extra controls
including:
Automatic operation mode (selectable option)
114
33
allows activation by either motion sensor,
The Low Energy swing operator is a surface mounted electromechanical unit which is designed specifically manual push pad/plate or via an integrated External
to provide a means of automating new or existing single doors. The flexible microprocessor control allows access control device
activation by motion sensors, push button or by manual activation. In manual activation mode, the operator will Push & Go (selectable option) allows activation
Unit with armset for
provide power assisted opening of the door and spring power closing like a conventional door closer. by gently pushing or pulling the door 'Outward Opening' doors
With an array of built-in safety features, the Low Energy operator is an ideal means of providing easy access for Manual operation allows the door to be easily
low traffic entrance doors, internal doors and disabled WC facilities. operated as a standard manual door whilst
still giving smooth action over the door cycle
121
Automatic
door
Power Boost (selectable option) in the final 121
114
Safety stop halts the door when an object or
153 Min.
710mm
(FIXED OPER ATOR LENGTH) person is encountered
33
Delayed action holding is adjustable 0 - 30 sec.
Additional safety sensors can be door mounted
Emergency egress allows manual door opening
Available in satin anodised aluminium finish and
114
33
External
a range of powder coated RAL colours
Unit with slide track arm for fitting to the pull side of the door.
Please note: Briton 2500 Series operators should only Unit with slide track for
be fittted by a qualified installer or electrical engineer. 'Inward Opening' doors
Operator length
(710mm fixed length)
Typical applications
The Low Energy operator provides a highly economic Internal
solution to the obligation placed on service providers
to comply with legislation concerning access for
Automatic
door
The addition of other safety features such as the Adjustable opening & closing speed n n
Allegion Fingersafe (2550.FG) and the ability to Adjustable delayed closing 1 - 30 seconds 1 - 30 seconds
monitor sensors helps to ensure compliance with EN Power requirements 240V ac ± 10%
16005:2012 at the time of installation. Dimensions Operator 112 x 121 x 710mm
Guarantee period 1 year
Operator length * Minimum clear opening width (Building Regulations Part M) - 800mm for new constructions; 750mm for existing buildings.
(710mm fixed length)
Internal
www.doorhardware-online.co.uk
Internal
Briton and Von Duprin exit hardware
Briton 2500 Series - Low energy operator Birmingham Central Library - photography by Tony Hisgett
Accessories
A selection of accessories is available for use with the
Briton operator including rubber finger protection and
activation buttons.
For additional accessories please contact your
Allegion Specification Consultant for further
information or guidance on the selection of
accessories.
Accessory Description
2550.AP Arm pack push - regular
2550.T.AP Arm pack pull - slide channel
2550.FG Rubber Finger Safe
Push pad - large with engraving
2550.PP.L.PTO “Push to Open” and surface
mounting box
Push pad - narrow with engraving
2550.PP.S.PTO “Push to Open” and surface
mounting box
www.doorhardware-online.co.uk