Professional Documents
Culture Documents
REFRIGERANT PIPING
Supply & fixing of interconnecting copper refrigerant pipe work
MR A3 duly insulated with elastomeric nitrile rubber for Copper piping NO. 1 #REF! #REF!
for Condensing unit.
DRAIN PIPING
MR A4 Providing and fixing of UPVC drain water piping complete with kg 1300 #REF! #REF!
6mm thick nitrile insulation. 32 mm dia ID
CONTROL CABLING
Supply and laying, testing & commissioning of following sizes of
MR A5 Copper conductor control cables effecting proper connections to No. 1 #REF! #REF!
equipment etc. complete as required.
i 3C x 1.5 Sq. mm
ii 4C x 1.5 Sq. mm
iii 4C x 16 Sq. mm
ACOSUTIC INSULATION
Supply & Fixing of Accoustic insulation to control the noise and
MR A7 vibration in the first piece of Ducts with 13 mm thick open cell sqm. 25 7046 176150
nitrile rubber insulation Class "1" fire retardant with alluminium
coted.
THERMAL INSULATION
MR A8 Supply & fixing of thermal insulation over the ducts for avoiding
condensation and to prevent heat loss complete with all
necessary accessories. Nitrile rubber insulation Thickness 19 mm
MR A9 ALUMINIUM GRILLS
Supply & Fixing of Alumiunm Powder coated supply air
FLEXIBLE CONNECTIONS
MR A10 Providing & fixing of flexible canvas connection between indoor
unit and duct to avoid the vibration transfer.
Control Valve Fitting For Refrigerant
MR A11 Controls such as filter drier, expansion valves, thermostat, pilot
solonate, Shutoff Valve.
MR A12 Stand For Outdoor Unit
MR A13 Duct Heater 6K.W with RH Control Pannel
MR A14 Control panel
Electrical control Pannel for AHU and Condenser Unit
VOLUME CONTROL DAMPER
MR A15 Powder coated extruded aluminum Square Diffuser with volume
control damper complete as required.
MR A16 SITC of differential pressure gauge
MR A17 SITC of Hygrometer
HEPA FILTERS:
Hepa Filters with Pleanum
DRAIN PIPE:
Supply & Installation of Drain Piping of requisite quantity 40 mm UPVC
THERMAL INSULATION:
Supply, installation & testing of external thermal insulation on ducts, as per the specifications & approved shop
drawings. Thermal insulation for indoor ducts foamed Nitrile Rubber with Alu Foil completely closed cell structure.
18 mm thick for Supply & Return air duct Class "1" of requisite quantity
ACCOUSTIC LINING:
GRILL/DIFFUSERS:
Supply & Return air Grill / Diffusers in extruted, anodiserd aluminium as per false ceiling design.
VOLUME CONTROL DAMPER PANEL & CABLE
Control Panel for AHU, Outdoor, Digital Temp. Gauge , Hygrometer & Differential Pressure Gauge
Cabling, & Earthing wire of requisite quantity
TOTAL #REF!