Professional Documents
Culture Documents
PV EQUIPMENT
Solar Modules Inverter Type 1 Inverter Type 2
Quantity: Quantity:
Manufacturer: Manufacturer:
Model #: Model #:
Inverter Location:
PV MOUNTING METHOD
Type: Roof Mount ( _____ kW)
___ Tar & Gravel ___ TPO ___ Modify Bitumen ___ Metal ___ EPDM Rubber Membrane ___Roll Out Comp Shingle
Roof Material:
___ Other (Please Describe):
Racking Method: ___ Ballast (Flat Roof) ___ Tilt-Up (Flat Roof) ___ Flush-Mount (Pitched Roof)
Racking Mfr: Racking Model:
Anchor / Flashing Mfr: Anchor / Flashing Model:
PV Array Tilt: PV Array Azimuth:
Type: Carport / Canopy ( _____ kW)
Configuration: ______ Rows x _____ Columns
Cantilever: _____ Single _____ Double Purlins: _____"C" _____"Z" / _____ Single _____ Shared
Manufacturer: PV Module Orientation: _____ Portrait ______ Landscape
Structural Drawing Available?: _____ YES _____ NO ______ I DON'T KNOW
Racking Mfr: Racking Model:
PV Array Tilt: PV Array Azimuth:
Type: Ground Mount ( _____ kW)
Configuration: ______ Rows x _____ Columns Protection Fence Required?: _____ YES _____ NO
Manufacturer: PV Module Orientation: _____ Portrait ______ Landscape
Foundation Type: ___ Concrete Piers ___ Ground Screws (Provide Spec) ___ Other: ____________________________
Racking Mfr: Racking Model:
Grade / Slope: PV Array Azimuth / Tilt:
Soil Type: _____ Clay _____ Sand ______ Rock ______ Mulch / Vegetation
PV BALANCE OF SYSTEM
Grounding Method: _____ Lay-In Lug _____ WEEB _____ Integrated
PV Production Meter: _____ YES _____ NO
PV Production Meter Manufacturer: Model:
Additional Comments:
ELECTRICAL SERVICE EQUIPMENT
Main Service Panel PV Interconnection Location (If Different From Main Service Panel)
Manufacturer:
Bus Bar Rating:
Main Breaker Rating:
L - L Volts:
L - N Volts:
Grounding Method: _____ Rod _____ Ufer _____Other PV Interconnection Method: ______ Breaker ______Splice ______ I DON'T KNOW
Distance from PV Array (ft.):
Elevation View