Professional Documents
Culture Documents
REV. NO. 2
ENGINEERING STANDARD DATE JUN 2001
PAGE 1 OF 3
This document is issued by Engineering Standards Section, SABIC R&D Complex, PO Box 42503, Riyadh 11551, Kingdom of Saudi Arabia.
The information contained in this document is the confidential property of SABIC. It can not be disclosed, copied or used for any purpose
without prior approval from SABIC. If you are not authorized to possess this document, please destroy it immediately.
NUMBER E06-X04
REV. NO. 2
Motors, DC - Data Sheet
DATE JUN 2001
ENGINEERING STANDARD PAGE 2 OF 3
1. Scope
These data sheets shall be used in conjunction with SES E06-S04.
Data Sheet
Insulation
Test and Inspection
Armature class______ Field class______
Design max temp rise ____________________ °C Inspection at factory by SABIC
Routine production tests
Frame Special tests as listed below
NEMA frame number ______________ Tests to be witnessed by SABIC
Above NEMA vendor frame ______________ Tests to be observed by SABIC
__________________________________________
Shunt field
Res ____________________________Ω at 25 °C __________________________________________
Induct. ___________________________mH, unsat.
__________________________________________
Armature inertia _________________________1b-ft2
Bearing type _______________________________ __________________________________________
External thrust ___________________________1bs
Insulation class _____________________________ __________________________________________
Motor catalog No.____________________________
Space heater: V________W ________ __________________________________________
Remarks: