Professional Documents
Culture Documents
Page 1 of 1 © Impaq
5 4 3 2 1 QUESTION: ANALYTICAL (MECHANICAL)
37
Given:
Five views and a detailed enlargement of a shifting spanner assembly, a welding symbol, a parts list, a title block and
1
3 a table of questions. The drawings have not been prepared to a scale.
T
7
Instructions:
VIEW 5 Complete the table below by neatly answering the questions which all refer to the accompanying drawing and the title
6 7 8 block. [29]
5
R16
WELDING SYMBOL QUESTIONS ANSWERS
S
ARROW LINE
11
R16
TAIL
REFERENCE LINE
10
W With reference to the welding symbol, link the number on
1 the drawing with the correct element in the column to the WELDING PROCESS 7
40
0
right of this question.
G 20 CONCAVE FINISH
WELD ALL AROUND
+0.15
4 -0.25 R4 B
11
A
6 Measure the angle at B. 1
F What is the purpose of the measurements on the fixed jaw and
E 7
handle at C?
2
80
R6
How many surfaces of the fixed jaw and handle must be
15 1
R8 machined?
3
S What direction of lay must be applied to the machined
16 1
VIEW 1 VIEW 2 VIEW 3 VIEW 4 surfaces?
PARTS LIST TITLE In the space below (ANSWER 17), draw, in neat freehand, the conventional representation of a bearing
17 5
on a section of a shaft.
PART QUANTITY MATERIAL
TOTAL 29
FIXED JAW AND ALL UNSPECIFIED RADII
1 1 CHROME VANADIUM CASTING DRAWING PROGRAM: TURBOCAD 2018
HANDLE ARE R2. ANSWER 17: Conventional representation of a bearing on a section of a shaft.
2 ADJUSTABLE JAW 1 TOOL STEEL APPROVED: JOHAN 2018-12-21
COPYRIGHT © JP
KOPIEREG © JP
NAME: ANALYTICAL (MECHANICAL)
GRADE 12:
ENGINEERING GRAPHICS & DESIGN DATE:
5 4 3 2 1 VRAAG: ANALITIES (MEGANIES)
37
Gegee:
Vyf aansigte en 'n gedetaileerde vergroting van 'n skroefsleutelsamestelling, 'n sweissimbool, 'n lys van onderdele,
1
3
T 'n titelblok en 'n tabel met vrae. Die tekeninge is nie volgens skaal voorberei nie.
7
Instruksies:
AANSIG 5 Voltooi die tabel hieronder deur die vrae, wat almal na die bygaande tekeninge en titelblok verwys, netjies te
6 7 8 beantwoord. [29]
5
R16
SWEISSIMBOOL VRAE ANTWOORDE
S
PYLPUNTLYN
11
R16
STERT
VERWYSINGSLYN
10
W Met verwysing na die sweissimbool, verbind die nommer
1 op die tekening met die korrekte element in die kolom SWEISPROSES 7
40
0
regs van hierdie vraag.
G 20 KONKAWE AFWERKING
SWEIS RONDOM
+0.15
4 -0.25 R4 B
11
A
6 Meet die hoek by B. 1
F Wat is die doel van die afmetings op die vaste kaak en
E 80 7
handvatsel by C?
2
R6
Hoeveel oppervlakke van die vaste kaak en handvatsel moet
15 1
R8 gemasjineer word?
3
S Watter bewerkingsrigting moet op die gemasjineerde
16 1
AANSIG 1 AANSIG 2 AANSIG 3 AANSIG 4 oppervlakke toegepas word?
LYS VAN ONDERDELE TITEL In die spasie hieronder (ANTWOORD 17), teken, in netjiese vryhand, die konvensionele voorstelling van
17 5
'n laer op 'n gedeelte van 'n as.
ONDERDEEL HOEVEELHEID MATERIAAL
TOTAAL 29
VASTE KAAK EN CHROOMVANADIUM- ALLE ONGESPESIFISEERDE
1 1 TEKENPROGRAM: TURBOCAD 2018
HANDVATSEL GIETSTUK RADIUSSE IS R2. ANTWOORD 17: Konvensionele voorstelling van 'n laer op 'n gedeelte van 'n as.
2 VERSTELBARE KAAK 1 GEREEDSKAPSTAAL GOEDGEKEUR: JOHAN 2018-12-21
COPYRIGHT © JP
KOPIEREG © JP
NAAM: ANALITIES (MEGANIES)
GRAAD 12:
INGENIEURSGRAFIKA & ONTWERP DATUM: