Professional Documents
Culture Documents
SYSTEM INITIALIZATION
1. From the NAV page, press DEP/ARR► (R5) (or from the MENU ). If for
ORIGIN airport does not appear, press ◄DEP/ARR (L6).
2. Select ◄DEP (L1) for the ORIGIN airport.
3. Select the desired RUNWAYS to filters the list of available SIDs, if any.
4. Select from the SIDS and select desired TRANSition, as required.
5. Press ROUTE► (R6) then NEXT to verify the procedure, resolve discontinuities,
and press EXEC.
LOADING AN AIRWAY
1. Press ◄ROUTE.
2. Paste the starting waypoint of the airway in the appropriate location in the flight
plan in the TO position.
3. Paste the exit point of the airway in the next TO position, right side.
4. Paste the Airway name in the VIA position, left side, abeam the exit point.
5. Press EXEC.
INTERCEPTING AN AIRWAY
1. Press ◄LEGS.
2. Place the next waypoint of the airway in the active waypoint position (L1).
3. Set the desired INTC CRS (R6).
4. Press EXEC.
DIRECT-TO A WAYPOINT
1. From the NAV or TSD page, press ◄LEGS (L2) (or from the MENU ).
2. Select the waypoint cleared, which copies it to scratchpad. (If not part of the
existing flight plan, the waypoint will have to be entered via SPAD)
3. Insert the waypoint as the active waypoint, resolve discontinuities, and press
EXEC.
LOADING A STAR
1. From the NAV page, press DEP/ARR► (R5) (or from the MENU ).
a. If required, select ARR► for the destination.
2. Select from the available STARS and then select TRANSition.
3. Verify the waypoints, resolve discontinuities, and press EXEC.
LOADING AN APPROACH
1. From the NAV page, press DEP/ARR► (R5) (or from the MENU ).
a. If required, select ARR► for the destination.
2. Select from the authorized APPROACHES and select TRANSition if used.
3. On the DEP/ARR page, select LEGS► (R6) and verify the waypoints, resolve
discontinuities, and press EXEC.
ACTIVATING VECTORS TO FINAL
1. From the NAV or TSD page, press ◄LEGS (L2) (or from the MENU ).
2. Select the approach fix labeled FAF, which copies it to scratchpad.
3. Make the FAF the active waypoint (L1), verify the computed INTC CRS (R6) by
pressing (R6) and press EXEC.
1. From the NAV page, press DEP/ARR► (R5) (or from the MENU ).
a. If required, select ARR► for the destination.
2. Select from the runways listed after the approaches.
3. On the DEP/ARR page, select LEGS► (R6) and verify the waypoints, resolve
discontinuities, and press EXEC.
4. For an extended runway centerline, with runway the active waypoint (L1), add
an INTC CRS (R6) and press EXEC.
EDITING A HOLD