Roll No. .................. 180844/170844/120844 instruction to be executed is stored in (CO1) a) Stack pointer b) Address latch 4th SEM / Computer Engg. c) Program counter d) Accumulator Subject : Microprocessor & Peripherals devices Q.7 Following is a 16 bit register for 8085 microprocessors (CO1) Time : 3 Hrs. M.M. : 100 a) Stack pointer b) Accumulator SECTION-A Note: Multiple choice questions. All questions are c) Register B d) Register C compulsory (10x1=10) Q.8 Which of the following is not a pair of general Q.1 In 8085 microprocessors, program counter uses purpose registers? (CO1) __________ bits. (CO2) a) AB b) BC a) eight b) three c) DE d) HL c) four d) sixteen Q.2 Which stack is used in 8085 microprocessors? Q.9 NOP stand for (CO2) (CO1) a) No operation b) No objection a) FIFO b) FILO c) New operation c) LIFO d) LILO d) None of the mentioned Q.3 In the instructions of 8085 microprocessors, how many types are present (CO3) Q.10 DMA stands for (CO4) a) One or two b) One, two or three a) Direct memory access c) One only d) Two or three b) Direct memory accumulator Q.4 Which of following addressing technique is used c) Direct mail access in 8085 microprocessors? (CO3) d) None of the mentioned a) Register b) Active c) Passive d) None of the mentioned SECTION-B Q.5 Handshaking mode of data transfer is (CO4) Note: Objective type questions. All questions are a) Synchronous data transfer compulsory. 10x1=10 b) Asynchronous data transfer Q.11 Define data bus. (CO1) c) Interrupt driven data transfer Q.12 Instruction cycle = Fetch cycle + _____ (CO2) d) Level mode of data transfer (1) (2) 180844/170844/120844 180844/170844/120844 Q.13 Name the data transfer techniques in which hand Q.29 Write the various applications of microprocessor. shaking is used. (CO3) (CO1) Q.14 Expand PPI. (CO4) Q.30 Explain the control word format of 8255 & define Q.15 RIM stands for _____. (CO3) the purpose of each bit. (CO5) Q.16 RST 7.5 is mask able interrupt (True / False) Q.31 Differentiate asynchronous (handshake mode of (CO3) data transfer & interrupt driven data transfer) (CO4) Q.17 Define program counter. (CO2) Q.32 Write a program in assembly language to find Q.18 Which bus is bidirectional? (CO1) largest of three numbers stored at some memory Q.19 Clock frequency determine______ of the locations. (CO3) processor. (CO2) Q.33 Draw & explain the block diagram of 8085 Q.20 Why is auxiliary carry flag used? (CO1) microprocessor. (CO1) Q.34 What are the functioned of (CO1) SECTION-C A) ALU Note: Short answer type questions. Attempt any twelve B) Stack pointer questions out of fifteen questions. 12x5=60 Q.35 Draw and explain timing diagram of memory write Q.21 Differentiate between mask able and non mask cycle. (CO2) able interrupts. (CO2) Q.22 Explain DMA operation. (CO4) SECTION-D Q.23 Draw and explain the timing diagram of memory Note: Long answer type questions. Attempt any two read and write operation. (CO2) questions out of three questions. 2x10=20 Q.24 Explain programmed data transfer techniques Q.36 Draw the block diagram of 8085 & define the with suitable diagram. (CO3) function of each pin. (CO1) Q.25 What is memory interfacing? Explain with Q.37 Classify the interrupt of 8085. Explain the steps to diagram. (CO5) process the interrupt generated in 8085. (CO3) Q.26 Explain the evolution of microprocessor & its Q.38 Explain peripheral I/O & memory mapped I/O with impact on society. (CO1) suitable diagram. (CO4) Q.27 Describe arithmetic group of instruction with (Note: Course outcome/CO is for office use only) suitable example referring to 8085. (CO3) Q.28 Discuss various flags of 8085. (CO2) (3) 180844/170844/120844 (4700) (4) 180844/170844/120844