Professional Documents
Culture Documents
Report Report CB
UL 62368-1 EN 62368-1 BS EN 62368-1 IEC 62368-1
A_S-1WR3 & B_LS-1WR3 series are specially designed for applications where an(two) isolated voltage is required in a distributed power
supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits.
Selection Guide
Input Voltage (VDC) Output Full Load Capacitive
Certification Part No. Nominal Voltage Current (mA) Efficiency (%) Load(µF)*
2024.01.19-A/3 Page 1 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
Input Specifications
Item Operating Conditions Min. Typ. Max. Unit
3.3VDC output -- 384/10 405/--
3.3VDC input
Other output -- 370/18 389/--
3.3VDC/5VDC output -- 270/8 286/--
Input Current 5VDC input 9VDC/12VDC output -- 241/12 254/--
(full load / no-load) 15VDC/24VDC output -- 241/18 254/-- mA
12VDC input -- 105/8 110/--
15VDC input -- 84/8 88/--
24VDC input -- 56/8 61/--
Reflected Ripple Current* -- 15 --
Surge Voltage(1sec. max.) 3.3VDC input -0.7 -- 5 VDC
2024.01.19-A/3 Page 2 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
Output Specifications
Item Operating Conditions Min. Typ. Max. Unit
Voltage Accuracy See output regulation curves (Fig. 1)
General Specifications
Item Operating Conditions Min. Typ. Max. Unit
Input-output electric strength test for 1 minute
Isolation 1500 -- -- VDC
with a leakage current of 1mA max.
Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ
Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF
Derating when operating
5VDC input temperature≥85℃, (see
Fig. 2)
Operating Temperature -40 -- 105
3.3/12/15/24VDC Derating when operating
temperature≥100℃, (see
input Fig. 2) ℃
Storage Temperature -55 -- 125
Case Temperature Rise Ta=25℃ -- 25 --
Pin Soldering Resistance Soldering spot is 1.5mm away from case for 10
-- -- 300
Temperature seconds
Storage Humidity Non-condensing 3.3/12/15/24VDC input 5 -- 95 %RH
2024.01.19-A/3 Page 3 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
Mechanical Specifications
Case Material Black plastic; flame-retardant and heat-resistant (UL94V-0)
Dimensions 19.65 x 6.00 x 10.16mm
Weight 2.1g(Typ.)
12VDC/15VDC/24VDC input
Other output
Fig. 1
2024.01.19-A/3 Page 4 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
5VDC input
3.3/12/15/24VDC input
Fig. 2
2024.01.19-A/3 Page 5 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
Design Reference
1. Typical application
Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as
shown in Fig. 3.
Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems
caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1.
D ua l
Table 1:Recommended input and output capacitor values
+V o
V in C ou t Vin Cin Single Vout Cout Dual Vout Cout
C in DC DC 0V
C o ut 3.3VDC 10uF/16V 3.3/5VDC 10uF/16 ±3.3/±5VDC 10uF/16V
GND
-V o
3.3V -- -- 9/12VDC 2.2uF/25 ±9/±12VDC 2.2uF/25V
Sin g le
-- -- 15/24VDC 1uF/50V ±15/±24VDC 1uF/50V
+V o
V in 5VDC 4.7µF/16V 3.3/5VDC 10µF/16 ±3.3/5VDC 4.7µF/16V
C in DC DC C ou t 12VDC 2.2µF/25V 7.2/9VDC 2.2µF/16 ±9VDC 1µF/16V
GND
0V other 15VDC 2.2µF/25V 12VDC 2.2µF/25 ±12VDC 1µF/25V
Fig. 3 24VDC 1µF/50V 15VDC 1µF/25V ±15VDC 0.47µF/25V
-- -- 24VDC 1µF/50V ±24VDC 0.47µF/50V
Fig. 4
2024.01.19-A/3 Page 6 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
2024.01.19-A/3 Page 7 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation
DC/DC Converter
A_S-1WR3 & B_LS-1WR3 Series
Notes:
1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58200001;
2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all
parameters in the datasheet;
3. The maximum capacitive load offered were tested at input voltage range and full load;
4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal
input voltage and rated output load;
5. All index testing methods in this datasheet are based on our company corporate standards;
6. We can provide product customization service, please contact our technicians directly for specific information;
7. Products are related to laws and regulations: see "Features" and "EMC";
8. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified
units.
2024.01.19-A/3 Page 8 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final
interpretation