Professional Documents
Culture Documents
Yes No
During the demonstration of skills, did the candidate:
During the demonstration of skills, did the candidate:
Wear appropriate PPE*
Perform root pass in accordance with WPS and/or client
specifications.*
Perform task in accordance with company or industry
requirement and safety procedure.*
Check weld visually for defects and repaired, as
required.*
Accept weld visually in accordance in applicable code and
standard.*
Clean root pass and free from defects and discontinuities.*
Perform task in accordance approved WPS.*
Perform subsequent/filling passes in accordance with
approved WPS.*
Check weld visually for defects and repaired, as required.*
Accept weld visually in accordance with applicable codes and
standards.*
Perform capping in accordance with WPS and/or
client specifications.*
Check weld visually for defects and repaired, as
required.*
The candidate’s demonstration was:
Satisfactory Not Satisfactory
Feedback to candidate:
He/She Perform Smoothly According to the WPS standards.
Candidate’s signature: Date:
April 19 2024
The candidate will be assessed based on his/her answers to the given questions.
The assessor should not deviate from the standard questions provided herein.
Oral Questions Satisfactory
response
1. Anything that may likely cause personal injury or damage to property, or their
combination.
3. It is the speed of an electrode makes reference to the surface of the plate in a plane
perpendicular to the weld axis.
4. It is bead between two plates in the same plane so as to give continuity of the section.
5. It is dark and heavy lines, that show the outline and shape of an object.
6. It will cause the deposit to a coarse rippled and flatter than normal weld.
9. Travel angle applies to the position of the electrode with reference perpendicular to the axis
of the weld.
11. Under what article and section of Philippine Constitution said the state
shall afford full protection to labor. They shall be entitled to security of tenure, humane conditions
of work, and a living wage.
12. Interrupts or disrupts the normal and orderly progress of any activity and may result in
injury (minor, serious or fatal) to people and/or damage or destruction of property that
result to losses.
13. In 7 hobbits of effective people emphasis that "Seek first to understand the to be
understood" in what hobbit number it is included?
14. "Two or more people who must coordinate their activities to accomplish a common goal".
15. Team members see themselves as belonging to a team rather than as individuals who
operate autonomously. They are committed to group goals above and behind their
personal goals.
A. COMMITMENT B . TRUST
C. COMMUNICATION D. PURPOSE
16. It a type of communication that flows from management to the next lower level, down
to the rank and file.
19. It is a movement of an electrode where it is pointing just opposite to the drag angle.
20. In Mathematical equation 80 – 60 + 25 x = 450 what is the missing number to get the
450 answer.
A. 40 B. 10 C. 20 D. 30
TRUE OR FALSE:
1. AMERICAN WORK STANDARD AWSD 1.1 code contains the requirement for fabricating
and erecting steel structure AWS means.
2. Weld spatter is caused by Improper Electrode Angle.
3. The product of 15 and 25 is 375
4. Weld Defect is the weld discontinuities that fail the requirement of the codes and
standards by which weld is made
5. The value of 25 centimeters to millimeters are 250
6. Undercutting is usually cause by high current and are too long during welding application
7. 3MM pipe wall thickness is not typically required beveling when pipe preparations
8. Cover pass/ Capping Pass is the Final pass being applied to complete a welding joint.
9. In welding electrode specification 1/8 inches is 3.2 MM
10. The first pass being applied to a grove join is the Filler Pass
11. WPS document providing the required welding variables for specific application to ensure
repeat ability by properly trained welders and operators, WPS means (Welding Parameters
Specification)
12. WPS is a document providing the required welding variables for specific application to
ensure repeat ability by properly trained welders and operators.
13. Inverter type is a power source uses to transistor to convert DC current to AC current.
14. Engine Drivers Type is a power sources designs to use a gasoline, diesel or propane to
run the engine to provide the power for welding.
15. Essential Variables is a qualification variable, for metal where impact testing is required,
that requires new welding procedure.
16. The HAZ is located at the base metal adjacent to the fusion line. the meaning of HAZ is
Heat affected zone
17. Root Opening is a separation at the joint root between the plates. it is also called root
gap.
18. SMAW is a welding process utilize wires spool when welding.
19. API NO. 1104 is a welding code use for welding of pipeline and related facilities.
20. Convert to millimeter, a 1/8" electrode has a diameter of 3.2M
Answer Key:
TRUE OR FALSE: