Professional Documents
Culture Documents
00 31-Jul-15
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
Receiving Inspection of Structural Steel Shapes & Plates SAIC-M-1067 17-Mar-16 CIVIL -
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
CRPO #86 FOR JAFURAH DEVELOPMENT PROGRAM CONDENSATE
TERMINAL BI-10-14244 CRPO NO. 6511081720 (OOK) / 6511081724 (IK) 10-14244 NPCC / MODUTEC
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
- - - - -
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
- - - -
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
10/20/23 10:00 AM 10/10/23 10:00 AM SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
2412-847A-X002-001 7.1.
SAUDI ARAMCO INSPECTION LEVEL
W
CONTRACTOR INSPECTION LEVEL
W
NO
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Structural shapes, plates & bars: ASTM A36 / A36M (For plates, bars, M,
S, HP, C, MC and L shapes; ASTM A572 / A572M, or ASTM A992 /
A992M (for WT and W-shapes). Commonly accepted structural steel
materials and shapes other than ASTM may be used in accordance with 12-SAMSS-007
A4
Appendix 1 of this specification. Any difference(s) in the material Sec. 4.2
dimensions, section properties, yield strength or tensile strength shall be
accounted for in the design calculations.
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Material test reports for each heat of structural steel, each lot of high-
12-SAMSS-007
A6 strength and ASTM A307 bolts shall be available for review by the buyer.
Sec. 7.7
Material test reports shall conform to EN 10204, , TYPE 3.1
2412-
The material designations shall include the applicable ASTM, AISI, DIN,
847A- 12-SAMSS-005
JIS, ISO, BSI or EN specification numbers or numbers of equivalent
X002- Sec. 5.2.2
specifications.
001
12-SAMSS-007
A11 All material shall be of new stock.
Sec. 4.1.1
12-SAMSS-007
A12 The minimum thickness of any part of structural shape shall be 5 mm.
Sec. 4.1.2
REMARKS:
REFERENCE DOCUMENTS:
1- 12-SAMSS-005 -- Marking of Metal Products, 7 May 2011
2- 12-SAMSS-007 -- Fabrication of Structural and Miscellaneous Steel, 17 May 2011
3- 12-SAMSS-008 -- Erection of Structural and Miscellaneous Steel, 25 Dec 2014