Professional Documents
Culture Documents
STN 006 en - Change of The Delivery Pistons
STN 006 en - Change of The Delivery Pistons
a b
• SANY supported by Putzmeister • sany-service@putzmeister.com • Germany • Post box no. 2152 • 72629 Aichtal • Tel: +49 (0) 7127 599-0 • Fax: +49 (0) 7217 599-569 •
SY 1000
Sany Technical Note STN 006
Revision: -0
Date: 7/6/2022 Change of the delivery pistons
Author / Editor: H. Heger Page: 2 of 2
9. After replacing the pistons, open the ball valves "a" and "b". Then start the engine , then acknowledge.
10. Press the buttons' function "RESET" until both pistons are no longer visible in the water tank.
11. Release the button, the button is now in the middle position.
12. Then wait approx. 60 seconds until the accumulador is loaded!
13. Switch on the pump at the local control panel. After a stroke correction, the pump runs normally.
a b
• SANY supported by Putzmeister • sany-service@putzmeister.com • Germany • Post box no. 2152 • 72629 Aichtal • Tel: +49 (0) 7127 599-0 • Fax: +49 (0) 7217 599-569 •