Professional Documents
Culture Documents
Date 17-Feb-2024
Location Hyderabad
Quote Id SI-QI-17
Revision No 1
Woodwork
Carcass Shutter Dimensions (in ft)
Sr. No. Product Shutter Finish Unit Quantity Rate Amount (₹)
Material Material Width Height
A Shoe rack
1 Shoe rack BWP Ply BWP Ply SF Laminate 4.00 2.00 Sqft 8.00 1350 10,800.00
B Drawing room
1 Tv base drawer unit BWP Ply BWP Ply SF Laminate 7.00 2.00 Sqft 14.00 1350 18,900.00
2 TV back panel No Carcass BWP Ply SF Laminate 7.00 4.00 Sqft 28.00 750 21,000.00
3 TV tall unit No Carcass Alu shutter SF Laminate 2.00 8.00 Sqft 16.00 750 12,000.00
C Dining Crockery
1 Crockery base unit BWP Ply BWP Ply SF Laminate 6.00 3.00 Sqft 18.00 1350 24,300.00
2 Crockery wall unit BWP Ply Alu shutter SF Laminate 6.00 2.00 Rft 12.00 1350 16,200.00
3 Crockery tall unit BWP Ply Alu shutter SF Laminate 2.00 8.00 Sqft 16.00 1350 21,600.00
4 Vanity base unit BWP Ply BWP Ply SF Laminate 3.00 3.00 Sqft 9.00 1350 12,150.00
D MBR
1 Main wardrobe BWP Ply BWP Ply SF Laminate 10.00 7.00 Sqft 70.00 1350 94,500.00
2 wardrobe loft No Carcass BWP Ply SF Laminate 14.00 2.00 Sqft 28.00 750 21,000.00
3 Dresser wall unit BWP Ply BWP Ply SF Laminate 3.00 4.00 Sqft 12.00 1350 16,200.00
4 Dresser bae unit BWP Ply BWP Ply SF Laminate 3.00 2.00 Sqft 6.00 1350 8,100.00
E CBR
1 Wardrobe BWP Ply BWP Ply SF Laminate 7.00 7.00 Sqft 49.00 1350 66,150.00
2 Frame Type Loft No Carcass BWP Ply SF Laminate 10.00 2.00 Sqft 20.00 750 15,000.00
3 study table with drawers BWP Ply BWP Ply SF Laminate 3.00 3.00 Sqft 9.00 1350 12,150.00
F GBR
1 Wardrobe BWP Ply BWP Ply SF Laminate 7.00 7.00 Sqft 49.00 1350 66,150.00
2 Frame Type Loft No Carcass BWP Ply SF Laminate 7.00 2.00 Sqft 14.00 750 10,500.00
3 study table with drawers BWP Ply BWP Ply SF Laminate 3.00 3.00 Sqft 9.00 1350 12,150.00
G Kitchen
1 Base unit BWP Ply BWP Ply SF Laminate 9.00 3.00 Sqft 27.00 1350 36,450.00
2 Wall unit BWP Ply BWP Ply SF Laminate 7.00 2.00 Sqft 14.00 1350 18,900.00
3 Frame Type Loft No Carcass BWP Ply SF Laminate 9.00 2.00 Sqft 18.00 750 13,500.00
H Kitchen opp unit
1 Base unit BWP Ply BWP Ply SF Laminate 4.00 3.00 Sqft 12.00 1350 16,200.00
2 Wall unit BWP Ply BWP Ply SF Laminate 4.00 2.00 Sqft 8.00 1350 10,800.00
3 Frame Type Loft No Carcass BWP Ply SF Laminate 4.00 2.00 Sqft 8.00 750 6,000.00
I Pooja
1 Pooja unit BWP Ply BWP Ply SF Laminate 4.00 3.00 Sqft 12.00 1350 16,200.00
SUB TOTAL (Services & Misc.) 566,100.00
Accessories & Appliances
Sr. No. Brand Description Quantity Rate Amount (₹)
A Kitchen
1 Ebco/Hettich Right Angle Cutlery Kitchen Basket 530x505x80mm (RA-21-20-4-CT) 1.00 5500 5,500.00
2 Ebco/Hettich Right Angle Cup & Saucer Kitchen Basket 530x505x100mm (RA-21-20-4-CS) 1.00 6200 6,200.00
3 Ebco/Hettich Right Angle Thali Kitchen Basket 530x505x200mm (RA-21-20-8-TH) 1.00 7500 7,500.00
4 Ebco/Hettich Side Pullout Frameless - 3 Tier 100x505x432mm (SPOB-4-20-17D) 1.00 4800 4,800.00
5 Tandem basket procurement and installation 2.00 3700 7,400.00
6 G/gola profile Profile handles 3.00 3500 10,500.00
SUB TOTAL (Services & Misc.) 41,900.00
Services & Miscellaneous
Sr. No. Service Type Description Unit Quantit Rate Amount (₹)
A DrawinG/Dining y
a. 1mm Laminates between MRP range 1100 to 1500 are categorised as SF Laminates.
b. 1mm Laminates between MRP range 1501 to 2300 are categorised as SF+ Laminates.
c. 1mm Laminates between MRP range 2301 to 3100 are categorised as HG Laminates.
d. 1mm Laminates between MRP range 3101 to 3900 are categorised as HG+ Laminates.
e. 1mm Laminates between MRP range 3901 to 4700 are categorised as MR Laminates.
f. 1mm Laminates between MRP range 4701 to 5500 are categorised as MR+ Laminates.
g. 1mm Laminates between MRP range 5501 to 6300 are categorised as Uni Laminates.
h. 1mm Laminates between MRP range 6301 to 7100 are categorised as Unit Laminates.
i. 1mm Laminates between MRP range 7101 to 7900 are categorised as FG Laminates.
j. 1mm Acrylics are upto MRP 4000.
k. 1mm Veneers are between MRP range 6000 to 7000.
l. Matt/Gloss Duco Paint.
7. This is a tentative quotation, sqft area is subject to change post site inspection and design finalisation.
Terms and Conditions
Quotation:
a) The quotations provided by Space Info Interiors during the Order Booking stage i.e. advance of 10% shall be referred to as ‘Tentative Quotation’ while those
provided after finalization of designs and at the time of Design Sign Off stage i.e. second payment milestone of 40% shall be referred to as ’Final Quotation’.
b) The Tentative Quotations provided by Space Info Interiors are tentative estimates and cannot be construed as final in any manner. The said quotations
provided by Space Info Interiors shall be valid for a period of Fifteen (15) days from its date of issue.
c) Initial quotations may not include civil, electrical and plumbing charges. The estimate for the same will be shared
during the design phase and are dependent on factors such as site conditions, amongst others.
d) The final cost of the project shall be estimated after consideration of actual site measurements and conditions,
changes in scope of work, designs, finishing and other similar factors.
e) Upon finalisation of the design for the relevant project with the Space Info Interiors Designer, a final project value that is
payable by the customer will be provided in the Final Quotation
f) The quotations provided by Space Info Interiors are inclusive of all applicable taxes, design charges and transportation.
g) The discount of quotations will be applicable to Woodwork and Services & Miscellaneous sections only, the
Appliance and Accessory section will not be computed into the discount.
h) Do note that the prices listed above for the materials are inclusive of the facilitation and procurement fees that we charge to facilitate provision of these
materials.
i) All the * marked appliances and products are being sourced directly from the vendors/manufacturers and Space Info Interiors is merely acting as an agent
facilitating the purchase between such vendor/manufacturer and the customer.
Pre Requisites:
a) Prior to the commencement of work by Space Info Interiors, the Customer shall ensure that the site is handed over to Space Info Interiors free of any
encumbrances and ready for execution as per the Scope of Work agreed in the Final Quotation during Design Sign-Off.
b) The Customer shall procure necessary permissions or approvals, if required, from the relevant authorities (society,
apartment body, local municipal body, etc.) prior to the commencement of works by NoBroker.
c) The Customer shall ensure that during the execution of works bySpace Info Interiors, no other contractor and / or labour is employed by the Customer for any
other works on the project site. If, in case, such requirement arises, the Customer shall promptly inform Space Info Interiors about such works and take a prior
written consent from Space Info Interiors. Space Info Interiors shall not be responsible for any delays, damages, quality issues, etc. in the event of violation of this
sub-clause by the Customer.
Cancellation and Refund Policy:
Space Info Interiors strives for 100% customer satisfaction. However, if you do not wish to avail the services of Space Info Interiors, the terms of cancellation and
refund are as follows:
a) The booking amount of 10% shall be refundable only if the design onboarding meeting has not taken place, post the first meeting the amount shall stand non-
refundable.
b) All further payments, including but not limited to those made post receipt of intimation of completion from the
Space Info Interiors Project Manager, shall be non-refundable.
Terms & Conditions
Technical Specifications
(a) In the initial estimate, all units apart from loft units shall have soft close hinges from Ebco/hettich
(b) The estimate is inclusive of SS handles upto Rs. 250/unit. Any changes in the handle design during the design
phase shall be charged accordingly.
(c) Exterior laminates will be of 1mm thickness and interior laminates will be of 0.8mm thickness.
(d) Plywood thickness will be 16 mm in case of Modular finishes and 18mm in case of carpentry finishes.
Woodwork Internal Details
1. Wardrobes
In the initial estimate, the Wardrobe internals will consist of the following.
(a) Wardrobe between 300mm to 900mm in width will consist of one drawer, one removable shelf and 1 hanger rod.
(b) Wardrobe between 900mm to 1800mm in width will consist of two drawers, two removable shelves and 2 hanger
rods.
(c) For wardrobes above 1800 mm in width, an additional drawer, removable shelf and a hanger rod shall be included
for every increment of 300 mm - 900 mm in width
(d) If the drawer has not been opted then the same shall be replaced by an extra shelf.
(e) Additional drawer/shelf if any shall be charged accordingly.
2. Kitchen
In the initial estimate, the Kitchen internals will consist of the following.
(a) Kitchen base/ bottom units apart from the drawer and accessories units shall contain one shelf.
(b) Kitchen wall/ middle units shall contain 1 shelf for 600mm height & 2 shelves for 900mm height units.
(c) Cylinder & sink units will not have shelves.