Professional Documents
Culture Documents
LIVELIHOOD
EDUCATION
9
QUARTER ELECTRICAL INSTALLATION &
4 MAINTENANCE
1
Quarter 4 – Module 5: PVC Offset Bend
First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of
the Government of the Philippines. However, prior approval of the government agency or office
wherein the work is created shall be necessary for exploitation of such work for profit. Such
agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright holders.
Every effort has been exerted to locate and seek permission to use these materials from their
respective copyright owners. The publisher and authors do not represent nor claim ownership
over them.
2
TLE 9
ELECTRICAL INSTALLATION
& MAINTENANCE
Quarter 4
Self Learning Module 5
PVC Offset Bend
Writer: Sherwin C. Co
Reviewer: Gerardo D. Guevara (Validator)
Anne Rozelle B. Co (Technical)
3
Introductory Message
This module was collaboratively designed, developed and reviewed by educators from
Schools Division Office of Pasig City headed by its Officer-In-Charge Schools Division
Superintendent, Ma. Evalou Concepcion A. Agustin in partnership with the Local
Government of Pasig through its mayor, Honorable Vico Sotto.
The writers utilized the standards set by the K to 12 Curriculum using the Most
Essential Learning Competencies (MELC) while overcoming their personal, social,
and economic constraints in schooling.
This learning material hopes to engage the learners into guided and independent
learning activities at their own pace and time. Further, this also aims to help learners
acquire the needed 21st century skills especially the 5 Cs namely: Communication,
Collaboration, Creativity, Critical Thinking and Character while taking into
consideration their needs and circumstances.
In addition to the material in the main text, you will also see this box in the body of
the module:
As a facilitator you are expected to orient the learners on how to use this module.
You also need to keep track of the learners' progress while allowing them to manage
their own learning. Moreover, you are expected to encourage and assist the learners
as they do the tasks included in the module.
4
For the learner:
This module was designed to provide you with fun and meaningful opportunities for
guided and independent learning at your own pace and time. You will be enabled to
process the contents of the learning material while being an active learner.
Expectation - These are what you will be able to know after completing the
lessons in the module
Pre-test - This will measure your prior knowledge and the concepts to be
mastered throughout the lesson.
Recap - This section will measure what learnings and skills that you
understand from the previous lesson.
Lesson- This section will discuss the topic for this module.
Wrap Up- This section summarizes the concepts and applications of the
lessons.
Post-test - This will measure how much you have learned from the entire
module.
5
EXPECTATION
PRE–TEST
Directions: Fill in the blanks with the correct word/s to complete the statement.
Select your answer on the box.
2. Use your ____________ and chalk to draw the height of obstruction on the
floor.
3. Mark off the PVC 100 mm from the edge. I would be the ____________ of the
offset’s first bend.
4. Measures 200 mm from your first marker and put a ____________ mark.
RECAP
In our preceding lesson about bending 90° PVC elbow, can you give the
procedure in applying heat to the PVC?
6
LESSON
The offset bend is one of the most common bends made in electrical conduit.
This is a method used to shift a conduit run a fixed distance to one side, up or down.
It is very unlikely that the conduit will be positioned in a straight line along the entire
distance needed. It is used when the PVC conduit enters an electrical box or when
the conduit crosses an uneven surface
Tools :
1. Steel meter stick/Straight edge
2. 30 x 60 triangle
3. Pull and push rule
4. Wet rug
Equipment:
1. Heat gun
Materials:
1. Pencil or chalk
2. PVC pipe
7
Preparatory Activity:
1. Prepare the required tools, materials and equipment.
2. Wear proper PPE.
3. Use a standard respirator and adequate ventilation to protect yourself
from this toxin.
Procedure:
8
5. Measures 200 mm from your first
marker and put a second mark.
9
ACTIVITIES
ACTIVITY 5.1
Directions: Draw an Offset bend using the dimension given. Use proper
instruments for this drawing activity.
10 cm
http://www.porcupinepress.com/_bending/offsets.htm
10
ACTIVITY 5.2
11
WRAP–UP
Directions: Choose from the hand EMOJI’s to express your understanding about
our lesson today and explain your reason.
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
VALUING
If you are going to do the bending of PVC conduit. What the things you
should give considerations. Write your response inside the call out.
12
POST TEST
Directions: Fill in the blanks with the correct word/s to complete the statement.
Select your answer on the box.
2. Use your 30x60 triangle and ____________to draw the height of obstruction
on the floor.
3. Mark off the PVC 100 mm from the edge. I would be the middle of the offset’s
____________ bend.
4. Measures ____________ from your first marker and put a second mark.
Directions: Write T if the underline word/s in the statement is true and F if false.
Write your answer on the space provided before the number.
_____ 6. Offset bend is a method used to shift a conduit run a fixed distance to one
side, up or down.
_____ 7. Offset bend is used when the PVC conduit enters an electrical box or when
the conduit crosses a flat surface
_____ 10. After you achieve the desired shape, wipe the PVC conduit with a wet rug
to harden immediately.
13
KEY TO CORRECTION
T 10.
F 9.
T 8.
F 7.
T 6.
Heat 5. Heat gun 5.
200 mm 4. Second 4.
First 3. Middle 3.
Chalk 2. 30x60 triangle 2.
Measure 1. Height 1.
R E F E R E N CE S
Printed materials:
CUETO, Marino C. and CABUSORA, Roman A. Jr., “Technology & Livelihood
Education – Module 1 Learner’s Material, IA-Electrical Installation &
Maintenance”, Prinpia Co., Ltd., First Edition 2018.
AZARES, Efren F. and RECAÑA, Cirilo B., “Effective Technology and Home
Economics Series III ELECTRICITY, Electricity Module for Third Year
High School”, Adriana Printing Co., Inc. 1999
14