Professional Documents
Culture Documents
Step 1. Remarks.
Step 2.
Apply cement grout/mortar unto
precast panel/blocks when integrating
with LEETSTEEL STIFFENER SYSTEM.
Step 3.
Apply a thin layer of cement mortar
grout onto the surface area where
LEETSTEEL stiffener and precast
panels/block are integrated. Lay the
fibre mesh onto the wet cement
mortar grout.
Step 4.
Skim the surface.
LEETSTEEL STIFFENER SYSTEM
Fibre Mesh
75mm 75mm
3mm ~ 5mm
3mm ~ 5mm
ISOMETRI VIEW
Fibre Mesh
LEETSTEEL
LEETSTEEL Stiffeners
21-AUGUST-2014
PLAN VIEW OF LEET STEEL STIFFENER WITH SKIM COAT SCALE
PICTURE OF FIBRE MESH APPLIED BETWEEN JOINTS OF LEETSTEEL STIFFENER AND PRECAST PANEL