Professional Documents
Culture Documents
BodyRepair BodyDimensions
BodyRepair BodyDimensions
(d) The imaginary datum line when measuring the height is be-
low 300 mm (11.81 in.) from the upper face on the center of
the frame.
300 mm
Pointer
Master Gauge
HINT:
Wrong Correct 1) The height of the left and right pointers must be equal.
2) Always calibrate the tracking gauge before measuring
or after adjusting the pointer height.
3) Take care not to drop the tracking gauge or otherwise
shock it.
Pointer 4) Confirm that the pointers are securely in the holes.
(c) When using a tape measure, avoid twists and bends in the
tape.
BODY DIMENSIONS DI-3
1,677
(66.02)
860
(33.86) 1,841
(72.48)
820 888
(32.28) (34.96) 1,728
1,139 (68.03)
(44.84)
910
818 (35.83) 1,749
712 (32.20) (68.86) 1,061 980
(28.03) 926 (41.77) (38.58)
(36.46) 1,538 687
(60.55) (27.05)
1,581
1,524 (62.24)
610
(60.00)
(24.02)
984
(38.74)
1,834
(72.20)
992
(39.06)
1,161
1,320 (45.71)
199
(51.97) (7.83)
671 535
(26.42) (21.06)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. G Hood lock support brace installation nut M6 (0.24)
A, a Front fender installation nut M6 (0.24) H, h Radiator support standard hole ø10 (0.39)
B, b Front fender installation nut M6 (0.24) I, i Radiator support standard hole ø10 (0.39)
C, c Front fender installation nut M6 (0.24) J, j Front fender apron standard hole ø15 (0.59)
D Cowl panel center mark — K, k Front fender bracket standard hole ø10 (0.39)
E, e Front fender No. 2 side apron standard hole ø10 (0.39) L, l Hood hinge installation nut M8 (0.31)
F, f Radiator upper support installation nut M6 (0.24) — — —
DI-4 BODY DIMENSIONS
1,268
863 (49.92)
(33.98)
1,248
1,694 (49.13)
(66.69)
885
(34.84) 1,156
(45.51)
956
1,677 (37.64) 1,100
(66.02) 860 (43.31)
(33.86) 1,040
(40.94)
835
(32.87)
1,066
(41.97) 1,043
(41.06)
Vehicle Dimensions
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. H, h Rocker panel assembly mark —
A, a Roof panel corner — I, i Roof side rail assembly mark —
B, b Hood hinge installation nut M8 (0.31) J, j Center body pillar assembly mark —
C, c Front door hinge installation nut M8 (0.31) K, k Center body pillar assembly mark —
D, d Front door hinge installation nut M8 (0.31) L, l Front door lock striker installation nut M8 (0.31)
E, e Front body pillar assembly mark — M, m Rear door hinge installation nut M8 (0.31)
F, f Front body pillar assembly mark — N, n Rear door hinge installation nut M8 (0.31)
G, g Rocker panel assembly mark — — — —
BODY DIMENSIONS DI-5
819
(32.24) 938 1,152
(36.93) (45.35)
917 1,190
(36.10) (46.85)
989
(38.94) 1,078
(42.44)
682
(26.85)
Vehicle Dimensions
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. Q, q Rocker panel assembly mark —
L, i Front door lock striker installation nut M8 (0.31) R, r Roof side rail assembly mark —
M, m Rear door hinge installation nut M8 (0.31) S, s Quarter panel assembly mark —
N, n Rear door hinge installation nut M8 (0.31) T, t Quarter panel assembly mark —
O, o Center body pillar assembly mark — U, u Rear door lock striker installation nut M8 (0.31)
P, p Center body pillar assembly mark — — — —
DI-6 BODY DIMENSIONS
834
(32.83)
1,118 1,432
(44.02) (56.38) 1,071
1,735 1,447
(56.97) (42.17)
(68.31)
1,399
(55.08)
995
(39.17) 1,529 712
(60.20) (28.03)
1,607
(63.27)
507
1,378 (19.96)
545
(21.46) (54.25)
1,488
(58.58)
2,067
(81.38)
1,362
1,645 (53.62) 964
(64.76) (37.95)
Vehicle Dimensions
C-f
or E-e
c-F
1,359 1,136
(53.50) (44.72)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. E, e Lower back panel No. 1 gusset corner —
A, a Back door hinge installation hole ø13 (0.51) F, f Tail gate hinge installation nut M8 (0.31)
B, b Back door damper stay installation nut M8 (0.31) G, g Rear floor pan standard hole ø45 (1.77)
C, c Quarter panel extension standard hole ø10 (0.39) H, h Center body pillar assembly mark —
D, d Tail gate lock striker installation nut M8 (0.31) — — —
BODY DIMENSIONS DI-7
1,227 2,634
1,175 (48.30)
(46.25) (103.70)
1,149
(45.24)
1,391
1,398 (54.76)
RH (55.04) 1,791 2,936
1,129 (70.51) (115.59)
963 (44.44) 2,221
(37.91) 1,224 (87.44) 1,373
(48.19) (54.06)
899 1,974
1,006 1,406 (77.71)
(39.61) (35.39) (55.35)
1,349
LH 1,669 (53.11)
(65.70) 1,556
(61.26)
608
(23.94) 750
(29.52) 516
(20.31) 1,728 1,409
(68.03) (55.47)
Front
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Front bamper extension No. 2 installation bolt M10 (0.39) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
DI-8 BODY DIMENSIONS
695
(27.36)
RH 482 450 612
(18.98) (17.71) (24.09)
503 699
LH (19.80) (27.52) 612 687
(24.09) (27.05)
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Front bamper extension No. 2 installation bolt M10 (0.39) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
BODY DIMENSIONS DI-9
1,227
(48.30) 2,634
1,175 (103.70)
(46.25)
1,149
(45.24)
1,391
RH 1,791 (54.76) 2,936
1,129 1,398 (70.51) (115.59)
(44.44) (55.04)
1,224
963 (48.19) 2,221 1,373
(37.91) (87.44) 1,974
(77.71) (54.06)
1,006 899 1,406
(39.61) (35.39) 1,349 (55.35)
LH 1,669 (53.11)
(65.70) 1,556
(61.26)
608
(23.94) 750
(29.52) 516
(20.31) 1,728 1,409
(68.03) (55.47)
Front
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Front bamper extension No. 2 installation bolt M10 (0.39) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
DI-10 BODY DIMENSIONS
612 695
RH 482 450 (24.09) (27.36)
(18.98) (17.71)
503
LH (19.80) 699 612 687
(27.52) (24.09) (27.05)
0
1,652 502 2,632
(65.04) (19.76) (103.62)
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Front bamper extension No. 2 installation bolt M10 (0.39) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
BODY DIMENSIONS DI-11
Front
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Winch bracket installation nut M12 (0.47) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
DI-12 BODY DIMENSIONS
695
450 612 (27.36)
RH (24.09)
422 (17.71)
(16.61)
503
LH (19.80) 699 612 687
(27.52) (24.09) (27.05)
Front
Wheel base 2,853 (112.32)
Imaginary
Datum
Line
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. D, d No. 2 body mounting hole ø43 (1.69)
16 x 16
A, a Winch bracket installation nut M12 (0.47) E, e Side rail inner channel standard hole (0.63 x 0.63)
B, b No. 1 body mounting hole ø26 (1.02) F, f No. 3 body mounting hole ø43 (1.69)
C, c Front spring support hole ø12.2 (0.480) G, g No. 4 body mounting hole ø43 (1.69)
BODY DIMENSIONS DI-13
1,425 1,173
(56.10) (46.18)
973
1,680 (38.30) 3,013
RH (66.14) (118.62)
710
(27.95) 1,163
963 830 1,244 (45.78) 1,157
(37.91) (32.68) (48.98) (45.55)
709 849
(27.91) (33.42)
LH 1,750
991
(39.01)
(68.90) 555
(21.85) 582
(22.91)
2,764
(108.82)
Vehicle Dimensions
C-d C-D
or or G-g
c-D c-d
Front 762 278 549
(30.00) (10.94) (21.61)
Imaginary
Vehicle Dimensions
Datum
Heavy Duty Light Duty Line
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. F, f Lower control arm installation hole - inner ø16.5 (0.650)
A, a Front bamper extension No. 2 installation bolt M10 (0.39) G, g Upper control arm installation hole - inner ø14.5 (0.571)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
C, c Suspension lower arm installation hole - rear (1.65 x 0.94) I, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
D, d Suspension lower arm installation hole - front (1.437 x 0.728) J, j Transport hook installation nut M12 (0.47)
16 x 16
E, e Side rail inner channel standard hole (0.63 x 0.63) — — —
DI-14 BODY DIMENSIONS
274
415 355 (10.78)
(16.34) (13.98) 586
LH 622
(23.07)
(24.49)
Front
Wheel base 2,853 (112.32)
Imaginary
Datum
Line
Vehicle Dimensions
Heavy Duty Light Duty
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. F, f Lower control arm installation hole - inner ø16.5 (0.650)
A, a Front bamper extension No. 2 installation bolt M10 (0.39) G, g Upper control arm installation hole - inner ø14.5 (0.571)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
C, c Suspension lower arm installation hole - rear (1.65 x 0.94) I, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
D, d Suspension lower arm installation hole - front (1.437 x 0.728) J, j Transport hook installation nut M12 (0.47)
16 x 16
E, e Side rail inner channel standard hole (0.63 x 0.63) — — —
BODY DIMENSIONS DI-15
1,425 1,173
(56.10) (46.18)
973 3,013
RH 1,680 (38.30) (118.62)
(66.14)
710
(27.95) 1,163
963 830 1,244 (45.78) 1,157
(37.91) (32.68) (48.98) (45.55)
709 849
(27.91) (33.42) 991
LH 1,750 (39.01)
(68.90)
555
(21.85) 582
(22.91)
2,764
(108.82)
Vehicle Dimensions
C-d C-D
or or G-g
c-D c-d
Front
762 278 549
(30.00) (10.94) (21.61)
A,a B,b C,c D,d E,e F,f G,g H,h I,i J K,k
310 257 509 111 123 115 90 253 *1 240 278
(12.20) (10.12) (20.04) (4.37) (4.84) (4.53) (3.54) (9.96) (9.44) (10.94)
Imaginary
Datum
Line
Vehicle Dimensions
Heavy Duty Light Duty
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
16 x 16
Symbol Name Hole dia. F, f Side rail inner channel standard hole (0.63 x 0.63)
A, a Front bamper extension No. 2 installation bolt M10 (0.39) G, g Lower control arm installation hole - inner ø16.5 (0.650)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Upper control arm installation hole - inner ø14.5 (0.571)
C, c Kinetic Dynamic Suspension System bracket installation hole ø18.5 (0.728) I, i Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
D, d Suspension lower arm installation hole - rear (1.65 x 0.94) J, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
E, e Suspension lower arm installation hole - front (1.437 x 0.728) K, k Transport hook installation nut M12 (0.47)
DI-16 BODY DIMENSIONS
622 581
RH 482
(24.49) (22.87) 425 579
(18.98) 415 355 (22.80)
(16.34) (13.98) (16.73)
274
503 355 (10.78)
LH (13.98) 622 586
(19.80) (24.49) (23.07)
Front
Wheel base 2,853 (112.32)
A,a B,b C,c D,d E,e F,f G,g H,h I,i J K,k
310 257 509 111 123 115 90 253 *1 240 278
(12.20) (10.12) (20.04) (4.37) (4.84) (4.53) (3.54) (9.96) (9.44) (10.94)
Imaginary
Vehicle Dimensions Datum
Line
Heavy Duty Light Duty
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
16 x 16
Symbol Name Hole dia. F, f Side rail inner channel standard hole (0.63 x 0.63)
A, a Front bamper extension No. 2 installation bolt M10 (0.39) G, g Lower control arm installation hole - inner ø16.5 (0.650)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Upper control arm installation hole - inner ø14.5 (0.571)
C, c Kinetic Dynamic Suspension System bracket installation hole ø18.5 (0.728) I, i Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
D, d Suspension lower arm installation hole - rear (1.65 x 0.94) J, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
E, e Suspension lower arm installation hole - front (1.437 x 0.728) K, k Transport hook installation nut M12 (0.47)
BODY DIMENSIONS DI-17
1,425 1,173
(56.10) (46.18)
973 3,013
(38.30) (118.62)
RH 1,680
710 (66.14)
(27.95) 1,163
841 830 1,244 (45.78) 1,157
(33.11) (32.68) (48.98) (45.55)
709 849
(27.91) (33.42)
LH 1,750
991
(39.01)
(68.90) 555
(21.85) 582
(22.91)
2,764
(108.82)
Vehicle Dimensions
C-d C-D
or or G-g
c-D c-d
Front 762 278 549
(30.00) (10.94) (21.61)
Imaginary
Datum
Line
Vehicle Dimensions
Heavy Duty Light Duty
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. F, f Lower control arm installation hole - inner ø16.5 (0.650)
A, a Winch bracket installation nut M12 (0.47) G, g Upper control arm installation hole - inner ø14.5 (0.571)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
C, c Suspension lower arm installation hole - rear (1.65 x 0.94) I, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
D, d Suspension lower arm installation hole - front (1.437 x 0.728) J, j Transport hook installation nut M12 (0.47)
16 x 16
E, e Side rail inner channel standard hole (0.63 x 0.63) — — —
DI-18 BODY DIMENSIONS
355 274
415 (10.78) 586
(13.98)
LH (16.34) 622 (23.07)
(24.49)
Front
Wheel base 2,853 (112.32)
Imaginary
Datum
Vehicle Dimensions
Line
Heavy Duty Light Duty
*1 416 (16.38) 418 (16.46)
HINT: For symbols, capital letters indicate right side of vehicle, small
letters indicate left side of vehicle (seen from rear). mm (in.)
Symbol Name Hole dia. F, f Lower control arm installation hole - inner ø16.5 (0.650)
A, a Winch bracket installation nut M12 (0.47) G, g Upper control arm installation hole - inner ø14.5 (0.571)
B, b Front stabilizer bracket installation nut M12 (0.47) H, h Rear shock absorber installation hole ø29.5 (1.161)
42 x 24
C, c Suspension lower arm installation hole - rear (1.65 x 0.94) I, Lateral control rod installation hole - front ø15 (0.59)
36.5 x 18.5
D, d Suspension lower arm installation hole - front (1.437 x 0.728) J, j Transport hook installation nut M12 (0.47)
16 x 16
E, e Side rail inner channel standard hole (0.63 x 0.63) — — —
BODY DIMENSIONS DI-19
REFERENCE VALUE
ENGINE COMPARTMENT
1,637
(64.45)
739
(29.09) 1,768
(69.61)
1,665
1,625 (65.55)
(63.98) 336
687 (13.23)
906
(27.05) (35.67)
1,641
(64.61) 1,547 1,749
1,581 351
(60.91) (68.86) (13.82)
(62.24)
1,577
961 (62.09)
(37.83)
HINT:
1) For symbols, capital letters indicate right side of vehicle,
small letters indicate left side of vehicle (seen from rear).
2) These values are actual measurements made on model.
Use these reference values. mm (in.)
Symbol Name Hole dia. C, c Front fender installation bolt —
A, a Headlight installation clip — D, d Front fender installation bolt —
B, b Headlight installation clip — E, e Front fender installation bolt —
DI-20 BODY DIMENSIONS
UNDER BODY
ø12.2
ø12.2
41.0 44.4
41.0 41.0
41.0 41.0
44.4 41.0
ø11.7
ø12.2
ø12.2 ø12.2
41.0 41.0 37.3 41.0
2.6_ 2.6_
11.3 7.0 7.0 10.7 11.3
7.0 10.7
39.2 7.0
39.2
11.4_ 11.4_
193.9 193.9
12.5_
*1
*2
Vehicle Dimensions
Heavy Duty Light Duty
*1 3.8 3.2
*2 ø76.0 ø75.7
mm
BODY DIMENSIONS DI-21
UNDER BODY
ø30.5
3.2
ø29.5
21.0_
29.2_
Vehicle Dimensions
Heavy Duty Light Duty
*1 6 3.2
mm