Professional Documents
Culture Documents
BOQ & Approved Makes NASIK
BOQ & Approved Makes NASIK
ELECTRICAL WORK
Unit
Sr.No Item Description
Each
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With
1 necessary accessories in wall/floor with chiselling appropriately as per Mtr
specification No: WG-MA/CC.
Supplying and erecting integrated LED round burial light 6W IP65 &
IK10 class having pressure die-cast housing, having system lumens output
of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto
6500K, THD<10%, p.f.
>0.90, operating range of 100-240V, inbuilt surge protection of 4 kV, Life
2 class of 50,000 Hrs. at L50B50, including Each
driver, salt spray tested for 500 Hrs. including making of recess of
appropriate size for flushing into surface with 2 Year warranty as per
specification No FG-ODF/FLS2.
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C.
3 50 cycles 300mm. 1400 RPM rust proof body Each
& blades, wire mesh, duly erected, complete.
Supplying and erecting triple pole mini feeder pillar with 500V, 200A
FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and
4 cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet Each
box with supporting angles, self locks, gasket having IP54,IK10 protection
and slanting top to be erected on provided foundation complete as per
specification no. SWSWR/ MFP
Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated
5 short - circuit breaking capacity (Icn) 10kA in provided distribution board Each
as per specification no. SW-SWR/MCB
Supplying, erecting and marking four pole isolators only switch version of
6 miniature circuit breakers of 80/100A in provided distribution board. Each
Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit
breaking capacity 25 kA (Ics=100% of Icu),
adjustable thermal (overload) setting and fixed magnetic setting with
provided leads, provision for installation of shunt/UV/trip alarm contact.
7 MCCB with phase barriers on both sides, insulation withstand capacity Each
800V, no line load bias in provided enclosure/panel as per specification
no. SW-SWR/MCCB Note
: For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3
pole MCCB.
Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit
breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload)
setting and adjustable magnetic setting with provided leads, provision for
installation of shunt/UV/trip alarm contact and MCCB should have phase
8 Each
barriers both sides, with insulation withstand capacity 800V, no line-load
bias in provided enclosure/panel as per specification no. SW-SWR /
MCCB. Note : For use of 4 pole MCCBs in place of 3 pole MCCBs add
20% in rate of 3 pole MCCB.
Supplying and erecting iron work, sheet metal work consisting of CRCA
sheets, various sections of iron, plates, chequered plates, rods, bars, MS
pipes, etc. for panel board or any other purpose with bending, cutting,
9 drilling and Kg
welding complete erected at the position with necessary materials duly
painted with one coat of red oxide and two coats
of enamel paint to match the switchgears or as per directions by the
Supplying and erecting bus bar chamber triple pole with neutral with four
aluminium bars, 500V 200A having 25mm (Width) X 5 mm (Thickness) ,
with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A
10 per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG Mtr
CRCA sheet and epoxy paint, with suitable number of ways and with
SMC/DMC Insulators and accessories of suitable rating complete as per
specification no. CP-BB
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm.
11 aluminium conductor complete erected with glands & lugs, on wall/ Mtr
trusses/pole or laid in provided trench/ pipe as per specification no. CB-
LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper
12 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper
13 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper
14 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper
15 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided
trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper
16 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steel
formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. copper
17 conductor complete erected with glands & lugs, on wall/ trusses/ pole or Mtr
laid in provided
trench/ pipe as per specification no. CB-LT/CU
Supplying , erecting & terminating XLPE insulated, galvanised steel
18 formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium Mtr
conductor laid in provided trench / pipe as per specification no. CB-HT
Providing & erecting epoxy outdoor / indoor end termination kit for LT
19 XLPE armoured cable 2.5 to 16 sq mm., with Each
necessary material as per specification No. CB-JT/LT
Providing & erecting epoxy outdoor / indoor end termination kit for LT
20 XLPE armoured cable 70 to 120 sq mm., with Each
necessary material as per specification No. CB-JT/LT
Providing and erecting Heat shrinkable out door termination kit for 11 kV
21 (UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary Each
material as per specification no. CB-JT/HT
Supplying & laying (including excavation) half round reinforced cement
concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in
22 proper line, level and slope including providing and fixing collars in Mtr
cement mortar 1:2 and curing etc. complete.
Supplying and laying (including excavation of suitable width & depth up
23 to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of Mtr
HDPE for enclosing cable below ground/road surface, to required depth
complete.
Supplying and laying (including excavation of suitable width & depth up
24 to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of Mtr
HDPE for enclosing cable below ground/road surface, to required depth
complete.
Providing & erecting hot dipped galvanised ladder type cable tray
25 manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & Mtr
100 mm height comprising all required standard accessories.
Supplying and erecting V cross arm with ISM channel of 75x40x6mm for
11kV HT OH line with arrangement to fix insulator at 45mm from the end
& horizontal distance between insulators 1220mm bent at angle of 60
26 degree keeping base 305mm and the total vertical height of V cross arm as Each
460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts,
washers complete as per specification no. OH-PL/VCA
Supplying & erecting inline D. P. Structure for 11/0.415 kV, 100 kVA
Transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 Mtr. Long
with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole
MCCB 200 Amps as incomer & 6 Nos. 100 Amps Kitkat / MCCB for out
going circuits. Transformer D.P. Structure includes the A. B. Switch 200
Amps,
D.O. fuse Set & L.A. Set. 2 Nos. of Top channel of size 100 mmx 50 mm
27 for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 Each
mm for erecting Transformer Channel of size 75 x40 mm for erecting D.O.
Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for
erecting Distribution Box , Transformer Belt etc.as per drawing (min. 124
Kg. iron work ) with necessary clamps, Nut-bolts. V cross arm, top clip,
insulators etc. complete with caution board & barbed wire, D.P. Structure
shall be erected in c.c. foundation complete
Supplying and erecting GI wire of high purity of required sizes used for
33 earthing or any other purposes on wall with Kg
necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.
Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV,
50 Hz., 100 kVA, Mineral oil immersed and naturally cooled outdoor type,
aluminium wound Non-sealed transformer, delta/star connected with
additional neutral brought out on load side, temperature rise should not
exceed 40℃ by thermometer in oil and 45℃ by the resistance method in
34 winding at full load rating, using type A winding insulation (kraft paper) , Each
with standard
accessories complete with test certificate with losses below 475 Watts at
50% load, 1650 Watts at 100% load as per IS:1180 (part 1) : 2014, with
necessary permissions of Electrical Inspector, as per specification no SS-
TR-NSL.
Supplying and erecting, 11 kV outdoor type drop out fuse with insulator
complete with fuse holders, fuse barrel with metal fitting, fuse element
35 mounted on M.S. channel with working current of 15A capacity complete Each
erected on provided
cross arm.
Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG
36 barb with a gap between two bars of 75 mm. firmly fixed on provided Kg
angle supports with necessary materials complete. (6.044 meters/kg.).
Providing printed instruction chart for treating persons suffering from
37 electric shock, printed in English & Marathi and Each
duly laminated complete.
Making trench in Hard murum/Tar road having 0.75 m depth and
38 minimum 0.3mtr width as per IS for laying provided cables up to voltage Mtr
level 1.1Kv cable complete as per specification No. CW-EXN-CTR
Painting of feeder pillar / switchgears and frame of panel board with
single coat of red oxide & two coats of approved quality enamel paint
39 by scrapping existing paint painting the same complete. (while SqMtr
calculating square meter area, area of angle iron frame on which the
switchgears are erected shall be considered if required)
B. CIVIL WORK
Unit
Sr.No Item Description
Each
Excavation for foundation in earth, soil of all types, sand, gravel and soft
murum, including removing the excavated material up to a distance of 50
m. beyond the building area and stacking and spreading as directed,
1 dewatering, preparing the bed for the foundation and necessary back 1
filling, ramming, watering including shoring and strutting etc. complete.
(Lift upto 1.5 m.) By
Mechanical Means
Excavation for foundation in hard murum including removing the
excavated material upto distance of 50 metres beyond the building area
and stacking and spreading as directed, dewatering, preparing the bed for
2 1
the foundation and necessary back filling, ramming, watering including
shoring and strutting etc. complete. (Lift upto1.50 m) By Mechanical
Means
Excavation for foundation in Soft rock and old cement or lime masonry
foundations including removing the excavated material upto a distance of
50 metres beyond the building area and stacking as directed, including
3 1
dewatering, preparing the bed for the foundation and necessary back
filling with available earth /murum, ramming, watering including shoring
and strutting etc. complete (lift upto 1.5m) By Mechanical Means
Excavation for foundation in Hard rock by chiselling, wedging, line
drilling, etc. including trimming and levelling the bed, removing the
excavated material upto a distance of 50 metres beyond the building area
4 1
stacking as directed, dewatering and back filling with available earth/
murum watering, ramming etc. complete. (Lift upto1.5 m). By Mechanical
Means
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to
5 20 cm thick including hand packing and 1
compacting etc. complete.
Providing and laying Cast in situ / Ready Mix cement concrete in M15 of
trap
/ granite / quartzite / gneiss metal for foundation and bedding / steps
including steel centering, formwork, laying / pumping, compacting,
roughening them if special finish is to be provided, finishing uneven and
honeycombed surface and curing etc. complete. The Cement Mortar 1:3
6 1
plaster is considered for rendering uneven and honeycombed surface, only.
Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed.), with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer /
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
Providing and laying Cast in situ / Ready Mix cement concrete M-25 of
trap / granite
/ quartzite / gneiss metal for R.C.C. work in foundations like raft, strip
foundations, grillage and footings of R.C.C. columns and steel stanchions
etc. including bailing out water, Steel centering, formwork, cover blocks,
7 1
laying / pumping, compaction and curing roughening the surface if special
finish is to be provided (Excluding reinforcement and structural steel) etc.
complete, with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer / concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Conveying materials obtained from road cutting including all lifts, laying
in layers of 20 cm to 30 cm. breaking clods, dressing to the required lines,
9 curves, grades and section, watering and compacting to not less than 97% 1
of standard Proctor density for a lead of over 50 m. to 300 m. inclusive
from the site of excavation to the site of deposition as directed.
Providing and fixing colour coated Zincalume (R) AZ150 (min 150
gms/sq.mt. total on each side) profiled sheets for roofing. The feed
material is manufactured out of nominal 0.45 mm Base Metal Thickness
(BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength,
metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium
43.4% zinc 1.6% silicon) with COLORBOND
(R) steel quality super durable polyester paint coat (with inorganic
pigment). The paint shall have a total coating thickness of nominal 35 um,
14 comprising of nominal 25 um exterior coat on top surface and nominal 10 1
um reverse coat on back surface. Profile sheet shall have nom. 950 - 1050
mm effective cover width and nominal 25-30 mm deep ribs with subtle
square fluting in the five pan at nominal 180-250 mm center- to-center.
The end rib shall be designed for anti-capillary groove and return leg. The
feed material should have coil manufacturers product details marked a
regular interval. Including fasteners with min. fastened with min. 25 um
Zinc-Tin alloy coated, Hex head, self- drilling screw etc. complete.
(weight of profile 4.52 Kilogram / One Square Metre)
Qty Price as
Per Unit
1 ₹ 249
1 ₹ 1,122
1 ₹ 2,040
1 ₹ 46,920
1 ₹ 714
1 ₹ 1,948
1 ₹ 8,721
1 ₹ 15,861
1 ₹ 181
1 ₹ 1,020
1 ₹ 1,010
1 ₹ 162
1 ₹ 332
1 ₹ 315
1 ₹ 357
1 ₹ 540
1 ₹ 4,503
1 ₹ 822
1 ₹ 714
1 ₹ 3,470
1 ₹ 11,934
1 ₹ 924
1 ₹ 133
1 ₹ 184
1 ₹ 1,046
1 ₹ 1,632
1 ₹ 183,600
1 ₹ 55,564
1 ₹ 485
1 ₹ 2,423
1 ₹ 1,938
1 ₹ 10,608
1 ₹ 146
1 ₹ 214,200
1 ₹ 3,366
1 ₹ 146
1 ₹ 816
1 ₹ 561
1 ₹ 174
1 ₹ 174
1 ₹ 735
1 ₹ 214
1 ₹ 326
1 ₹ 8,415
1 ₹ 357
1 ₹ 5,100
1 ₹ 6,681
1 ₹ 413
1 ₹ 480
1 ₹ 164
Qty Price as
Per Unit
cu.m. ₹ 3,200.00
cu.m. ₹ 3,800.00
cu.m. ₹ 3,200.00
cu.m. ₹ 3,800.00
cu.m. ₹ 375.00
cu.m. ₹ 7,500.00
cu.m. ₹ 9,500.00
M.T. ₹ 125.00
cu.m. ₹ 1,800.00
Sq.mtr ₹ 510.00
Nos ₹ 180.00
Sq.mtr ₹ 2,000.00
Tonne ₹ 120,000.00
Sq.mtr ₹ 950.00
Sq.mtr ₹ 210.00
LIST OF APPROVED MAKES
20 Transformer
21 Any Other
LIST OF APPROVED MAKES
Make
MEW / Sintex /Nil Kamal /Ajay / National / RMW
Vishal / Polycab / Finolex / KEI / HPL / R.R / V- Guard
Poly cab/ Finolex/ KEI/ Kenter/ Havells/ HPL/ R.R/ Kable/ Vishal/ Metrocab
L&T/G.E./C&S/Schneider/Indo-asian/HPL
Anchor/ Vinay/ KALKI/ Great White/ Havells/ Benlo/ Legrand
L&T/ GE./ C&S/ Siemens/ Schnieder/ Crompton
Klug Power System
Braco / KEW /Chetana
3D / Chetana / Braco / KEW / Dowells / ECC
Bajaj / volmont / Surya / Transrail
Jindal / Tata / Surya Prakash / Zenith-Birla / Apollo
Rex / Duraline / Electrex / Finolex / Tirupati
Anchor / Satnley / Kew / Vinay / KALKI / Great white / Equivalent
Kirloskar/Cummins/Mahindra/Powerica?Cuter-piller or approved by engineer In charge
Philips/Bajaj/Crompton/Surya/Havells/Osram/Equivalent
Cromton/Bajaj/Havells/Khetan/GE
Anchor Penta/Legrand/Havells/Vinay approved by Engineer in charge
Precision/ Astral/ Mody/ Anchor or Approved by Engineer Incharge
TATA/Quench
Ador/Okaya/Delta/Aerocare/Bijlify/Mindra/Lubi/Siemens/TIREX/Servotech/Power-1Micro
Pvt LTD./ABB India Ltd/ PiEV/ E-FUEL / URZZA
Trans Delta/ Nashik Transformer Ind./PVN/Power Ele./
SIEMENS/ Jyoti Transformer/Sinner Transformer Pvt Ltd.
As per Approved By Engineer In Change