Professional Documents
Culture Documents
Compact Catalog: Monoblock Directional Control Valves
Compact Catalog: Monoblock Directional Control Valves
MONOBLOCK
DIRECTIONAL CONTROL VALVES
SD4
Features
Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems.
H Fitted with a main pressure relief valve.
H Diameter 16 mm -- 0.63 in interchangeable spools.
H Available manual and remote with flexible cables spool control kits.
Working conditions
This catalog shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40°C -- 104°F
temperature.
Additional information
This catalog shows the product in the most standard configurations.
Please contact Customer Service Dpt. for more detailed information or
special request.
WARNING!
All specifications of this catalog refer to the standard product at this date.
Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN 5th edition December 2000:
INCORRECT USE OF THE PRODUCT. This edition supercedes all prior documents.
2 DAC002A
SD4
Dimensional data
MADE IN ITALY
101111001
P0000001
P0000001 P00 = production year (2000)
WALVOIL
101111001 00001 = progressive number
MADE IN ITALY
Valve code
92 55
3.62 2.17
31 46 37
1.22 1.81 1.46
1.57
40
8.2
0.32
184.5 max
Æ
3.78
96
1.57
40
2.76
70
7.26
1.46
37
1.10
28
0.43
Position 1
11
0.79
20
15°
1.73
Position 0
44
15°
Position 2
20
23 30 M8
1.18 0.79
0.91
85.5
3.37
Standard threads
BSP UN--UNF METRIC
PORT
(ISO 228/1) (ISO 11926--1) (ISO 262)
DAC002A 3
SD4
Hydraulic circuit
Standard valve is supplied with positive overlap spool (1CP).
AB
P
T
120
1750
Ex.: SD4/1(KG3--120)/1CP8L
Right inlet
A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration).
BA
P
T
120
1750
Ex.: SD4/1(KG3--120)/ED--1CP8L
4 DAC002A
SD4
Performance data (pressure drop vs. flow)
Open center
From inlet to outlet.
5 10 15 (US gpm)
10
(bar)
8 (psi)
A 100
Pressure drop
6
P T
4
B 50
0
0 15 30 45 60
Flow (l/min)
8 (psi)
A 100
Pressure drop
6
P T
4
B 50
0
0 15 30 45 60
Flow (l/min)
8 (psi)
A 100
Pressure drop
6
P T
4
B 50
0
0 15 30 45 60
Flow (l/min)
DAC002A 5
SD4
Ordering codes
Example:
SD4 / 1 (KG3--120) / 1CP 8 L - SAE *
1. 2. 3. 4. 5.
4.
1. Body kits * 8
TYPE CODE DESCRIPTION
1 5KC1117000 1 section
3. Spool options 2.
TYPE CODE CIRCUIT DESCRIPTION
1CP 3CU1110110 Double acting with positive overlap, 18
3 positions, A and B closed in neutral position K
1N 3CU1110120 Double acting, 3 positions, A and B closed in
neutral position, negative overlap
2 3CU1125130 Double acting, 3 positions, with A open to tank
in neutral position
Y
3 3CU1131130 Single acting on A, 3 positions, B plugged;
requires SAE 6 plug (see part I )
4 3CU1135140 Single acting on B, 3 positions, A plugged
requires SAE 6 plug (see part I )
6 3CU1150130 Double acting, 3 positions, closed center SV
7 3CU1155130 Double acting, 3 positions, closed center with
A and B to tank in neutral position
6 DAC002A
SD4
Ordering codes
II
I Port plug *
3. TYPE CODE DESCRIPTION
SAE 6 3XTAP817130 Plug for single acting spool
SLP
II Optional handlever
TYPE CODE DESCRIPTION
AL01/M8x120 170011012 Standard handlever L= 120mm/4.72in
TP
DAC002A 7
SD4
Spools options
1 0 2 1 0 2 1 0 2
A B A B A
1CP 2 3
P T P T P T
“B” port plugged
1 0 2 1 0 2 1 0 2
B A B A B
4 6 7
P T P T P T
“A” port plugged
40 44.5 49
1.57 1.75 1.93
1 0 2 8 1 0 2 10 1 0 2 9
1 0 2
11 1 0 2 17
1 2 12
1 0 15
0 2 16
1 0 2 18
8 DAC002A
SD4
Special configurations
37.5
1.48
3.78
96
7.17
208.5
8.21
- 0.21
6.5
Æ
1.30
--5.5
33
24.2
Stroke
0.95
Æ
20
0.79
180
Angle excursion ± 90°
7.09
AB
P
T
120
1750
DAC002A 9
SD4
Special configurations
71.5
2.81
216 max.
3.78
96
23.5
0.93
47.5
1.87
M8 20
0.79
85.5
3.37
AB
120
1750
10 DAC002A
SD4
Installation and maintenance
The SD4 valve is assembled and tested as per the technical specification of this catalog.
Before the final installation on your equipment, follow the below recommendation:
-- the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat
surface;
-- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly
on the valve;
-- prior to painting, ensure plastic port plugs are tightly in place.
A
B
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
DAC002A 11
WALVOIL S.P.A.
42100 REGGIO EMILIA · ITALY · VIA ADIGE, 13/D
TEL. +39.0522.932411 · FAX +39.0522.300984
E--MAIL: INFO@WALVOIL.COM · HTTP: //WWW.WALVOIL.COM
CUSTOMER SERVICE
TEL. +39.0522.932555 · FAX +39.0522.932455
D1409808I
DAC002A