You are on page 1of 7

GFR Analysis Report DriveTest_Cluster Sungai Liat

HUAWEI TECHNOLOGIES CO., LTD.

Bad spot and Bad Event Cluster Sungai Liat Overview


Cluster Sungai Liat
Overview
Cluster Sungai Liat
Zoom In

HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Page 2

(1) Bad Event on MS2 (Call Dropped)


Spot: Bad Event (Call Dropped) at
SLT067MD1_DMT_KudaySelatan area
[2G
NCR]_CR_01_SS_Clus ter Sungai

HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Analyze:
Call Dropped is served by
SLT067MD1_DMT_KudaySelatanMD3 with
Fair RxLevSubdBm and poor RxQual.
This cell was served on side lobe in bad
spot area. After investigation, We found
that theres suspect co-channel
interference between
SLT067MD1_DMT_KudaySelatanMD3 and
STOSNGLIATMDC3 have same BCCH
(600) which is impacted to bad Qual/Call
Dropped.
These bad spot area is in LAC border. It
found LAC island or mushroom LAC in
each sites. Based on CFGMML, CRH for
SLT067MD1_DMT_KudaySelatanMD3 is
14dB (It means, cell will keep camping
on, difficult to cell reselection), we can
reduce the value of CRH from 14dB to
6dB
Action:
Retune immediately for
SLT067MD1_DMT_KudaySelatanMD3 to
solving bad spot or just waiting Refarming
(included GFR) activity.
Page
3
For permanent solution is LAC Merging.

(2) Bad Event on MS2 (Blocked Call and Ping Pong Handover)
Spot: Bad Event (Blocked Call and
PingPong HO) at
N_SLT065MD1_PRO_SekolahHarapanBangka
area
Analyze:
Theres is suspect co-channel
interference between
N_SLT065MD1_PRO_SekolahHarapanBan
gkaMD1 and STOSNGLIATMDC1with
BCCH 831 and bad event is in LAC
border (island LAC/Mushroom LAC). In
order to, user happened Pingpong HO
frequently which is impact to Dropped
Call and Blocked Call.
Action:
Retune immediately for
N_SLT065MD1_PRO_SekolahHarapanBan
gkaMD1 to solving bad spot or just
waiting Re-farming (included GFR)
activity.
For permanent solution is LAC Merging.
But, if its impossible
to do, just change
[2G
NCR]_CR_02_S
S_Clus ter Sungai
Liat_Fre to solving
Cell Reselect
Hysteresis
(CRH)
discrepancy LAC (LAC island/Mushroom
LAC).
HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Page 4

(3) No Bad Event on MS2 (Bad Qual due to suspect co-channel interference)
Spot: No Bad Event (Bad Qual due to
suspect co-channel interference) at
N_SLT065MD1_PRO_SekolahHarapanBangka
area
Analyze:
Theres is suspect co-channel
interference between
N_SLT065MD1_PRO_SekolahHarapanBan
gkaMD3 and MLBRSGLIATMD3 with
BCCH 606 and bad spot is in LAC border
(island LAC/Mushroom LAC). In order to,
user happened Pingpong HO frequently
which is impact to Dropped Call and
Blocked Call.
Action:
Retune immediately for
N_SLT065MD1_PRO_SekolahHarapanBan
gkaMD3 to solving bad spot or just
waiting Re-farming (included GFR)
activity.
For permanent solution is LAC Merging.
But, if its impossible to do, just change
[2G
Cell Reselect Hysteresis
(CRH) to solving
NCR]_CR_03_S S_Clus ter Sungai Liat_Fre
discrepancy LAC (LAC island/Mushroom
LAC).
HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Page 5

(4) Bad Qual on MS2 (Bad Qual due to suspect dragging coverage in LAC Border)
Spot: Bad Qual due to suspect dragging
coverage in LAC Border.
Analyze:
Bad spot at
C_SLT064MG1_TSEL_GriyaAirRuay which
is theres no Colo DCS. So that, It shall
be dragging coverage in DCS through
C_SLT064MG1_TSEL_GriyaAirRuay.
Beside that, Bad spot area is in LAC
Border, which is probably hard handover
issue.
Action:
Add cell colo DCS for
C_SLT064MG1_TSEL_GriyaAirRuay. To
make smooth handover and avoid to
dragging coverage in DCS Cell.
For permanent solution is LAC Merging.
But, if its impossible to do, just change
Cell Reselect Hysteresis (CRH) to solving
discrepancy LAC (LAC island/Mushroom
LAC).

[2G
NCR]_CR_04_SS_Clus ter Sungai Liat_C

HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Page 6

(5 & 6) Bad Qual on MS2 (Bad Qual due to suspect No DCS/Colo at both of sites,
SLT082MG1_TBG_Jurung & C_SLT099MG1_TSEL_Kenanga2 )
Spot: Bad Qual due to suspect theres no
DCS/Colo at SLT082MG1_TBG_Jurung &
C_SLT099MG1_TSEL_Kenanga2.

Analyze:
Bad Qual due to suspect theres no
DCS/Colo at SLT082MG1_TBG_Jurung &
C_SLT099MG1_TSEL_Kenanga2. So that,
this bad spot area was dragged from
BATURUSAMDC to KENANGAMDC.
Action:
Add cell colo DCS for
SLT082MG1_TBG_Jurung &
C_SLT099MG1_TSEL_Kenanga2. To make
smooth handover and avoid to dragging
coverage in DCS Cell.

HUAWEI TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR

Page 7

You might also like