Professional Documents
Culture Documents
Cat® 6060/6060FS
2
Engine Alternatives Service Training
Fuel consumption
at 60% engine utilization 329 l/h 320 l/h
at 70% engine utilization 384 l/h 373 l/h
3
CAT 3512C Service Training
4
CAT 3512C Service Training
5
CAT 3512C – Bucyrus Setup Service Training
6
CAT 3512C Service Training
7
CAT 3512C – Bucyrus Setup Service Training
8
CAT 3512C Service Training
9
CAT 3512C – Engine Mounting Service Training
10
CAT 3512C – Fuel System Service Training
11
Air Intake System – CAT Service Training
12
Engine Cooling System – CAT 3512C Service Training
Co
ola
n t
Air
Coolant
r
Ai
r
Ai
Coolant
13
Engine Cooling System – CAT 3512C Service Training
Air
14
Engine Cooling System – CAT 3512C Service Training
15
Engine Cooling System – ECM Controlled Service Training
Case Drain
Tank
HP 0-280 bar
16
Overview Engine cooling Service Training
Engine Coolant
Temperature
via SAE J1939 650 mA => min. Flow => min. Fan Speed
150 mA => max. Flow => max. Fan Speed
700
Fan: Low Speed
(Engine Coolant 89°C)
600 (Intake Manifold 56°C)
Controller OutputCurrent (mA)
500
400
Engine Coolant
Intake Manifold
300
200
Fan: High Speed
(Engine Coolant 99°C)
100 (Intake Manifold 62°C)
0
-100 -50 0 50 100 150 200
Full Speed
Temperature (°C)
1800 RPM
17
Exhaust System – CAT Service Training
Repair any exhaust leaks and replace all covers which have been fitted to the turbochargers
and mufflers. The covers are fitted to reduce the possibility of ignition of atomized oil from
possible leaks. Do not leave these covers off during machine operation.
18
CAT 3512C and Gearbox Service Training
19
Pump Drive Gearbox Service Training
20
Pump Drive Gearbox Service Training
21
Pump Drive Gearbox Service Training
22
Pre Chamber Lubrication Service Training
23
Gearbox Cooling System – Scheme Service Training
0,5 bar
Pressure Switch
Filter
24
Gearbox Oil Cooling – RH Service Training
25
Gearbox Oil Cooling – Radiators Service Training
26
Service Training
Pumps Assembly
Swing Gearbox Servo pump 4
Swing Cooling
Pump
Charge Pump
4 Servo pump 3
Pump
3 8
Oil Cooling
Pumps
6
7
Gearbox
Swing Cooling
Pump Pump Servo
5 Servo
Main pump 1
pump 2
Pumps 2
Engine 1
Fan Drive
Pump
1 4
Oil Cooling
Pumps
2
3
1 Swing
Main Charge
Pumps
Pump
27
More Information? Service Training
Hey Fellows,
28