Professional Documents
Culture Documents
• Each cell was assembled with a new CCM that was coated with Pt-black (5 mg/cm2) on one side
and Pt-C (0.3 mg/cm2) on another side
• Coated Ti-plate GDL was used with Pt-black side of the CCM in each cell (i.e., anode side)
• Both GDLs and the inner openings of the gaskets – all measured 50x50 mm (except for skyre 9)
Cell_T/anode_hum/cathode_hum = 65C/65C/65C
Cell_T/anode_hum/cathode_hum = 65C/65C/65C
(internal resistance was monitored for skyre 9 and skyre 11, and it
I (amp)
Likun’s data
Skyre11 – cell assembled with Likun’s instructions, but the data could not be reproduced – the
pumped current is way lower! Likun did reproduce his earlier results by assembling a new cell last
week.
Recovery Test
Black – skyre5
Red – skyre9 The cells assembled with coated Ti
I (amp)
Blue – skyre11
Red - Skyre 9
plates as anode GDL could be
Black - Skyre 5
Blue - Skyre 11
recovered after flooding (albeit with
much lower recovery current)
Disassembly of skyre 11
Cathode side