Professional Documents
Culture Documents
Raushan DSIF SEMINAR Best PPT-1
Raushan DSIF SEMINAR Best PPT-1
ON
DOUBLE SIDED INCREMENTAL FORMING
PRESENTED BY:
RAUSHAN KUMAR
( ROLL NO. :-1935007 )
M.TECH. PRODUCTION ENGG.
• Introduction
• Characteristics
• Formability and Deformation
• Forming Factors
• Advantages
• Limitations
• Applications
• Conclusion
• References
INTRODUCTION
It uses two independently controlled tools to form a part from a clamped
sheet via the accumulation of small localized deformations.
The tool on the top side of the workpiece is generally named as the
master tool, while the tool on the bottom side is named as the supporting
tool or slave tool.
In this manufacturing process two tools are used to deform a metal sheet
into a predefined shape by following a prescribed toolpath.
•Fig.1 (Left) Generation1 DSIF machine, (Right) cross-Section schematic of
DSIF process for a truncated cone.
CHARACTERISTICS
• Tool Rotations
• Feed Rate
• Step Size
• Compressive Stress
• Forming Force
• Squeezing Effect
Limited Formability.
•Google source
THANK YOU