Professional Documents
Culture Documents
Familiarization
with
construction Equipment
ADVANTAGES & DISADVANTAGES
OF USING EQUIPMENT
1. Large and complicated works can be carried out easily
2. Faster rate of progress
3. High quality of work
4. Equipment can work in adverse weather, climate and
topography
5. Equipment is free from social and emotional factors
6. Equipment helps to maintain construction site safer
and cleaner
1. large investment
2. non-availability of spare parts
3. trained and skilled operator required
4. replaces large number of laborers and raise unemployment
5. uses of fuel causes environmental problem
6. reselling and disposing off equipment will be a problem
EARTHWORK
EQUIPMENT
Name: Backhoe Loader / Backhoe Purpose Application Remarks
For Cutting of Suitable for all
excavation trenches, pits heavy cutting
below the etc., leveling
ground and loading
EARTHWORK
Name: Excavator
EQUIPMENT
Purpose Application Remarks
For excavation Cutting of Suitable for all
below the trenches, pits heavy cutting
ground etc., leveling and
loading
EARTHWORK
Name: Power Shovel
EQUIPMENT
Purpose Application Remarks
For excavation For cutting and Suitable for
above its own loading cutting in all
track or wheel dry soil
level
EARTHWORK
Name: Dragline
EQUIPMENT
Purpose Application Remarks
For bulk excavation in For canals and pits excavation, Loose soils ,marshy land
above in loose soils below cutting and desilting of ditches and water areas
its own track level
EARTHWORK
Name: Clamshell or grab
EQUIPMENT
Purpose Application Remarks
For deep confined cutting Such as shafts ,pits ,wells Consists of hydraulically
in pits, trenches controlled bucket
suspended from a lifting
arm
EARTHWORK
Name: Dozer
EQUIPMENT
Purpose Application Remarks
For moving earth up to a Clearing and grubbing can be track-mounted
distance of about 100m, sites, excavation of surface and wheel mounted
shallow excavation earth ,and maintaining
roads
EARTHWORK
EQUIPMENT Name: Scraper
MENT They are generally fixed type of material transporting system and
UIP used when material to be transported from one place to another is
EQ
AT ION in large quantity and takes relatively long period, to be transferred.
T
SPOR Therefore they are mostly used at sand and gravel quarries.
N
TRA Loading to these belts can be done by loaders.
Bucket conveyers
ME
NT They are efficient means of transporting loose materials
UIP
EQ vertically. Therefore when earth is to be transported vertically
TION
RTA they are commonly used. Generally steel buckets in a steel chain
SPO
TRA
N revolve around vertical structure. Loading is done manually or
mechanically and emptying is done automatically.
Ropeways
ING • The device use to remove the air from the soil mass is
C T called compacting equipment.
PA
• Though soil will compact itself naturally, but the process
OM
C is very slow and it may take years together to reach
TH desired density
AR •
E Sheep Footed Roller
• Grid Compactor
• Padded Rollers
• Three Wheel Rollers
• Vibrating Rollers
• Tandem Rollers
• Pneumatic Rollers
• Frog Hammer
• Plate Compactors
• Hand Held Roller
Sheep Footed Roller
ENT
These are the types of rollers with small projection
IPM
NE
Q U from its drums to allow maximum pressure in the
TIO
AC
H CO
MP earth. They are suitable for clayey soil. They are made
T
EAR of steel drum either self-propelled or tractor towed
type.
Grid Compactor
These are ordinary steel wheel vibratory rollers. The drum
ENT
U IPM of this roller is covered by steel chain grids which gives
EQ
T ION more pressure on the surface to be compacted. These
PAC
OM
T HC compactors are used on granular materials when size of the
EAR
grain is relatively larger.
Padded Rollers
These are steel drum type rollers in which small
ENT
U IPM rectangular pads are projecting out of the steel drums to
EQ
T ION create more soil pressure. From a distance they look
PAC
OM
T HC similar to sheep footed Roller.
EAR
Three Wheel Rollers
These are suitable for the mixed type of the soil and
ENT
commonly used to compacted thinner layer of fills.. These
IPM
NE
Q U are commonly found in 8/10 tons type. They are
TIO
MP
AC conventional type roller used almost on all types of soil.
CO
EAR
T H
However it is found less effective on uniformly graded
material.
Vibrating Rollers
Ordinary vibrating rollers are single drum type steel wheel
ENT rollers to be towed by tractors. Main feature of this type of the
UIPM
TIO
NE
Q roller is providing vibrating effect on the material layer to be
A C
HC
OM
P
compacted. It is suitable for granular soil. This is suitable when
T
EAR depth of fill is relatively greater than 200mm.
Tandem Rollers
They are 2 wheel steel drum type rollers, generally self-
U IPM
ENT propelled. Some tandem rollers are available in 3 axles
EQ
PAC
T ION having 3 steel drums rolling in tandem. They are called
T HC
OM
"Three Axle Tandem Rollers". This may be with one
EAR
wheel vibrating or both wheel vibrating.
Pneumatic Rollers
This type of the roller has rubber tyres, generally it consists of 3 in the front and
ENT
4 in the rear. They are suitable for clayey soil. They can be ballasted by adding
U IPM water or sand on the body tank of these rollers to increase the dead load of these
Q
NE
TI O
MP
AC rollers. They are non-vibrating types. These rollers are suitable for the
H CO
EAR
T compaction of the bituminous pavement because they do not crush the
aggregate. Also they are most suitable in asphalt concrete paving work-
especially for back rolling of the finished surface.
Frog Hammer
It is also called monkey jumpers these compactors are very useful
ENT and handy when area to be compacted is very small. They are
U IPM
ION
EQ generally used to compact backfilling around the manhole, back
T
PAC filling of the culvert approach or on corners of the structures where
OM
T HC
EAR other compacting equipment cannot reach. The equipment is hand
held by the operator to move from one place to another. A small
engine on the top of the rammer gives the jumping effect.
Plate Compactors
These are small hand held equipment used in compacting
ENT
EQ
U IPM small area. Fill depth layer of earth to be compacted but
ION
OM
PAC
T
this equipment should not exceed 100mm. This equipment
T HC
EAR has small vibrating plate generally 600mmx600mm or
less.
Hand Held Roller
These are small drum rollers, generally vibrating and self-
ENT
EQ
U IPM propelled, but may also be push type. Pushing off these
ION
OM
PAC
T
rollers become easy when they are vibrating. Therefore
T HC
EAR they are considered as self-propelled, even with only on
drum.
AGGREGATES PRODUCTION AND HANDLING
Screening Plants
Screening is necessary in order to separate the aggregates by size. Screening plants are selected
depending upon the specification of aggregates that are required for the work. In aggregate production,
sieving plays an important role. The following two types of screens are generally in use.
▪ Revolving Screens
These are the most common types of screens used to wash and screen sand and gravel. The operating of
this type of screens is simple and slow. Therefore maintenance and repair costs are low as compared to
other type of screens. Streams of water may be sprayed on the aggregates as it moves through the
screen. Aggregates are separated by size and stored temporarily in bins below the screen. These
aggregates are then transferred to stock pile yard.
AGGREGATES PRODUCTION AND HANDLING
Vibrating Screens
It is the most widely used screens for aggregate production for their efficiency and capacity to
handle large amount of materials. These plants come under multiple deck type. Screens are
installed one above another. Each screen is called deck. A vibrating mechanism is filled to the
steel frame which holds the screens. Therefore all the screens vibrate simultaneously.
CRUSHING MACHINE
A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust.
Crushers may be used to reduce the size, or change the form, of waste materials so they can be more
easily disposed of or recycled, or to reduce the size of a solid mix of raw materials (as in rock ore), so
that pieces of different composition can be differentiated.
Jaw crusher
Cone Crusher
CONCRETE MIXING
a. Hand mixing-unimportant work and very small works
b. Machine mixing- efficient, economical, quick
-Produces homogeneous concrete
i. Tilting drum mixer
ii. Non-tilting drum mixer
Some may be hand feeding and some are machine feeding
Hand fed
Mechanically
Fed
Machine mixing- efficient, economical, quick
i. Tilting drum mixer
ii. Non-tilting drum mixer
ROAD CONSTRUCTION EQUIPMENT
ROAD CONSTRUCTION EQUIPMENT
ROAD CONSTRUCTION EQUIPMENT
ROAD CONSTRUCTION EQUIPMENT
ROAD CONSTRUCTION EQUIPMENT
Water trucks are in the construction industry
which uses them for compaction and dust
control.
Crawler
mounted crane
CRANES FOR LIFTING: MOBILE CRANES
Self-propelled rubber -
tyred wheels cranes
CRANES FOR LIFTING: MOBILE CRANES
Drift method
METHODS OF TUNNELING Pilot tunnel method
TUNNEL BORING MACHINE (TBM) METHOD
TBMs are used to excavate tunnels with a circular cross section through a variety of
subterranean(below ground) matter, hard rock, sand or almost anything in between.as TBM moves
foreword , the round cutter heads cut into the tunnel face and splits off large chunks of rock. The cutter
heads carves a smooth round hole through the rock-the exact shape of a tunnel. Conveyor belt carry
the rock shavings through the TBM and out back of the machine to a dumper.
A tunnel boring machine generally is a device for excavating a tunnel in such a way that the material
to be removed is disintegrated by a continuous rotation of a group of cutting tools thrust against the
surface of the material at the working face. The cutting tools are mounted in an arrangement suitable
to excavate a tunnel of the required diameter.
The machine is mounted immediately behind the cutting head and remains stationary while the cutting
head excavates .The machine body contains mechanisms to provide the required torque and thrust to
the cutting head as excavation progresses and maintain its stationary position or move itself forward,
as required.