𝛽 = Talus Global Slope 𝜃 = Critical slope for rupture 𝑁𝑎 = Normal strength to failure plan 𝑇𝑎 = Tangent of W on the rupture plan 𝑅 = Weight force Reaction 𝑁𝑟 = Normal component of R on the failure plan 𝑇𝑟 = Tangent of R on the failure plan Circular Rupture
ƭ o
r δ w
R Water influence
Buoyancy and porepressure
Facts Geotechnical Parameters General Talus Slope General Talus Slope General Talus Slope Geotechnical Parameters Bench cut Bench width (Min) Face Slope (Max)
Bench height (Max)
General Talus Slope (Max)
Compaction Draining Surface Water Control Surface Water Control Surface Water Control
OR Passive Mechanical Reinforcement Revegetation Evolution Actions
• Define geotechnical parameters
• Compaction • Conduct Surface Water SOP • Release Puddles for infill • Passive Mechanical Reinforcement • Revegetation SOP for infill
• Not always all the actions are applicable or even practically
or economically possible.
• BUT, if there is no safety improvement from the engineering