Professional Documents
Culture Documents
防盗
防盗
To activate anti-theft system, wires V/G 469 & B/G 621 must
be connected together. These wires are located behind the
radio near the four relays. Machines shipping from the factory
will not have these wires connected.
V/G 469
B/G 621
1
ANTI-THEFT SYSTEM
continued
PASSWORD?
0 0 0 0
2
ANTI-THEFT SYSTEM
continued
PASSWORD?
1
0 0 0 0
Push the travel mode switch and select the first digit of the
security code. By pushing the travel mode switch you will scroll
through 0 – 9. When the number has been selected push the work
mode switch to select the next number in the security code.
3
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2
0 0 0
Push the travel mode switch and select the second digit of the
security code. By pushing the travel mode switch you will scroll
through 0 – 9. When the number has been selected push the work
mode switch to select the next number in the security code.
4
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2 3
0 0
Push the travel mode switch and select the third digit of the
security code. By pushing the travel mode switch you will scroll
through 0 – 9. When the number has been selected push the work
mode switch to select the next number in the security code.
5
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2 3 4
0
6
ANTI-THEFT SYSTEM
continued
After setting the password, the anti-theft system will only work if
the following procedure is completed:
After work is completed for the day and just before exiting the
cab after the ignition switch is turned off. Turn ignition switch
“off and on” two times in two seconds. When this is completed
the alarm will sound and system is activated.
7
ANTI-THEFT SYSTEM
continued
PASSWORD?
0 0 0 0
8
ANTI-THEFT SYSTEM
continued
PASSWORD?
1
0 0 0 0
Push the travel mode switch and enter the first digit of the
security code.
Push the working mode switch and select the second digit.
9
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 0
2 0 0
Push the travel mode switch and enter the second digit of the
security code. Push the working mode switch and select the third
digit.
10
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2 0
3 0
Push the travel mode switch and enter the third digit of the
security code. Push the working mode switch and select the fourth
digit.
11
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2 3 0
4
Push the travel mode switch and enter the fourth digit of the
security code, then push the auto mode switch. If the correct
security code was entered the monitor will automatically
scroll to the normal display screen. Start engine!
12
ANTI-THEFT SYSTEM
continued
PASSWORD?
1 2 3 5
ERROR
14