Professional Documents
Culture Documents
SPP Series
(mini to midsize SET WHILE
RUN)
P Series PP Series
(mini to midsize (mini to midsize SET WHILE
OPEN/CLOSE) RUN)
12
LEADING SLOTTING SHAFT 29KW 28KW
SLOTTER UNIT
13
TRAILING SLOTTING SHAFT 29KW 28KW
14
DIE CUT DRUM 34KW 37KW
DIE CUTTER UNIT
15
ANVIL DRUM 29KW 28KW
15
Triple wheel shaft box with independent servo control for each wheel
shaft for SPP1 series.
Four wheel shaft box with independent servo control for each wheel
shaft for SPP2&SPP3 series.
Automatic setup of air gates inside the vacuum box
22
35
Pull
Pull Roll
roll
36
Ball screw shafts and linear bearing guide rails for head movement
Center slot head moveable
Double slot shafts for flexible order change
Replaceable PU rings for female precreaser and creaser rolls
Glue tab knife steel to steel design
Sheet travel direction scrap conveyor
Solid universal joint shaft instead of chains for slot head movement
Double slotter configuration available for SPP2 and SPP3
Independent servo control for each leading and trailing slotting shaft
47
53
57
63
68
69
70
ALARM SCREEN
LATITUDE MACHINERY CORP.
Machine Technical Comparison
100-
Noise Level 100-105DB 85-95DB 100-105DB 85-90DB 85-90DB
105DB
Setup time 90 sec. 60 sec. 140 sec. 75 sec. 160 sec. 90 sec.
Servo Gear
Lead edge to 1 st print ≤ +/ 1mm ( 2 .00mm Delta=1mm Lead edge to 1 st print ≤ +/ 1.5mm (3.00mm total)
Lead edge to die cut ≤ +/ 1.5 mm Lead edge to die cut ≤ +/ 2mm
Delta=1mm
( 3 mm total) (4mm total)
Lead edge of box to end of lead slot ≤ +/ 1 .5 mm Lead edge of box to end of lead slot ≤ +/ 1.5mm
Delta=0.0mm
( 3 mm total) (3mm total)
Lead edge of box to end of trail slot ≤ +/ 1.5 mm Lead edge of box to end of trail slot ≤ +/ 2mm
Delta=1mm
( 3 mm total) (4mm total)
Pre-Crease
Score
Twin Box