Professional Documents
Culture Documents
Casing Size 0.000 Depth: Casing Burst ( 70% ) 0 Maximum Allowable Casing Press Reduced Circulating Pressure in PSI (1) 0 Reduced Circulating Rate in SPM (2) 0 Original Mud Wt (PPG) 0.0 Frac. Gradient E.M.W. In PPG 0 Surface to Bit : (7) 0
INITIAL CIRCULATING DRILL PIPE PRESSURE Reduced Circulating Pressure (1) Plus SIDPP + (4) (9) 0 psi @ (2) 0 psi 0 psi @ (2) 0 spm 0 spm
KILL MUD WEIGHT (no trip margin) 20XSIDPP TVD = 20 X 0 (4) = (6) 0 Original Mud Wt + (3) Kill Wt Mud = (10) #DIV/0! ppg
KICK INFORMATION
Shut In Drill Pipe Pressure SIDPP psi (4) Shut In Casing Pressure SICP psi (5) True Vertical Depth TVD ft (6) Pit Gain - BBLS 0 0 (1) 0 X (10) #DIV/0! = (11) #DIV/0! psi Original Reduced Circ. Pressure X Kill Mud Weight Orig. Mud Wt
WAIT & WEIGHT METHOD Circulating Drill Pipe Pressure (9) 0 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Strokes Pumped 0 0 0 0 0 0 0 0 0 0 0
(3)
0.0
@ (2)
0 spm
BARITE REQUIREMENTS Lbs. Of Barite to increase entire circulating system to Kill Wt Mud = #DIV/0! Lbs. Approximate Volume increase due to addition of the barite to wt up #DIV/0! Bbls WELL CONTROL NOTES Max. Allowable casing pressure= (Frac. Gradient EMW - Orig. mud wt) x TVD shoe x .052 Max. Casing Pressure is lesser of (1) Surface equipment (2) Casing burst (3) Frac Grad. Max. Casing pressure may be increased above #3 after gas bubble is above the shoe. Maintain casing pressure control. Keep standpipe pressure correct.
(11) TPD
** psi
(7)