This document provides information on parallel thread specifications, including formulas for calculating pitch based on thread type. It lists various international and industry standards for metric, unified inch, pipe, Acme, stub Acme, trapezoidal, and buttress threads. Tables show the ideal size ranges for cylinders used to measure thread effective diameters for different thread angles. Notes specify that correct thread description and specifications should be provided when placing orders.
This document provides information on parallel thread specifications, including formulas for calculating pitch based on thread type. It lists various international and industry standards for metric, unified inch, pipe, Acme, stub Acme, trapezoidal, and buttress threads. Tables show the ideal size ranges for cylinders used to measure thread effective diameters for different thread angles. Notes specify that correct thread description and specifications should be provided when placing orders.
This document provides information on parallel thread specifications, including formulas for calculating pitch based on thread type. It lists various international and industry standards for metric, unified inch, pipe, Acme, stub Acme, trapezoidal, and buttress threads. Tables show the ideal size ranges for cylinders used to measure thread effective diameters for different thread angles. Notes specify that correct thread description and specifications should be provided when placing orders.
Document Provided by Truthread Gauges & Tools Pvt. Ltd.
PARALLEL THREADS NOTE :- P = CONSTANT
P = PITCH OF THE THREAD W = MEAN DIAMETER OF THE CYLINDERS USED. DESIGNATION TYPE OF THREADS P VALUE FORMULA
SPECIFICATION BASIC DIMENTION GAUGING PRACTICE
M ISO METRIC 60 THREADS {For general fastening purpose} P= 0.866025 p-w ISO 724-1993 ISO 965/1-1998 IS : 4218 (Part 3) 1999 IS : 4218 (Part 4) 2001 ISO 1502 1996 IS : 2334 2001 UNC , UNF, UNEF, UN , UNS UNFIED INCH 60 THREADS{For general fastening purpose} P = 0.866025 p-w ANSI B 1.1-1982 ANSI / ASME B 1.2 1983 G PIPE THREAD 55 {where pressure tight jointly are not made on the threads} P = {0.96049 p} {1.16568 w} ISO 228 / 1-2000 IS : 2643 (Part 3)-1999 ISO 228 -2- 1987 IS : 10216-1988
Acme ACME 29 THREADS ( for transmission of power & motion ) P = ( 1.93335 p ) (2.9939 w) ANSI B 1.5 - 1999 ANSI B 1.5 - 1999
Stub Acme STUB ACME 29 THREADS ( for transmission of power & motion ) P = ( 1.93335 p ) (2.9939 w) ANSI B 1.8 - 1988 ANSI B 1.8 - 1988
Tr ISO METRIC TRAPEZODIAL 30 THREADS ( for transmission of power & motion ) P = ( 1.86602 p ) (2.8637 w ) ISO 2903, ISO 2904 IS: 7008 (Part 3) 1988 IS: 7008 (Part 4) 1999 DIN 103 Part 9-1985 BUTT BUTTRESS INCH THREADS 7 / 45 FORM (for transmission of power & motion) P = ( 0.89064 p ) (1.15689 w ) ANSI B 1.9 1973 & BS 1657 - 1950 ANSI B 1.9 1973 & BS 1657 - 1950
Please Check the Disclaimer Document Provided by Truthread Gauges & Tools Pvt. Ltd. TAPER THREADS DESIGNATION TYPE OF THREADS P VALUE FORMULA SPECIFICATION BASIC DIMENTION GAUGING PRACTICE NPT PIPE THREADS 60 General purpose (Taper 1:16on ) P= 0.86574 p-w ANSI/ASME B:1.20.1-1983 For Standard Basic Type & H-28 (Part II)-1957 for Step Limit Type ANSI/ASME B:1.20.1- 1983 For Standard Basic Type & H-28 (Part II)-1957 for Step Limit Type NPTF DRYSEAL PIPE THREADS 60 (Taper 1:16 on ) P= 0.86574 p-w ANSI / ASME B 1.20.3 1976 ANSI / ASME B 1.20.5 1991 R/ Rc BSPT PIPE THREAD 55 where pressure tight joints are not made on threads (Taper 1:16 on ) P =(0.96024 * p) (1.16568)w ISO 7/1 -1994 IS : 554 - 1999 ISO 7/2 2000 IS : 8999-1979 NGT TYPE 1 (SIZE 2) Taper threads 60 of Gas cylinder valves (Taper 1:16 on ) P = 0.86574 * p-w IS : 3224 - 2002 IS : 9121 - 1979 Please Check the Disclaimer Document Provided by Truthread Gauges & Tools Pvt. Ltd. SIZES OF CYLINDERS FOR EFFECTIVE DIAMETER MEASUREMENT SR.NO. TOTAL INCLUDED ANGLE OF THREAD SMALLEST IDEAL OR BEST SIZE CYLINDER LARGEST 1 2 3 4 5 60 55 29 30 7 / 45 BUTT 0.505 * p 0.506 * p 0.487 * p 0.489 * p - 0.577 * p 0.564 * p 0.516 * p 0.518 * p 0.54147 * p 1.010 * p 0.853 * p 0.650 * p 0.652 * p 0.61433 * p MAX. CYLINDER BEST CYLINDER MIN. CYLINDER NOTES WHILE SENDING AN ENQUIRY PLEASE ENSURE THAT CORRECT THREAD DESCRIPTION IS MENTIONED ALONGWITH THE CLASS OF FIT,(IF SPECIAL, THEN PLEASE FURNISH COMPONENT DIMENSIONS / DRAWINGS) & SPECIFICATIONS TO BE FOLLOWED OR ELSE THE ABOVE SPECIFICATION WILL BE APPLICABLE. THREAD RING GAUGES BELOW 20 MM ARE MANUFACTURED AND CHECKED WITH THE HELP OF CALIBRATED MASTER CHECK PLUGS. (IF DIRECT MEASUREMENT IS REQUIRED, PLEASE MENTION ON ENQUIRY AND PURCHASE ORDER.) Please Check the Disclaimer