Professional Documents
Culture Documents
3.1.9-IBC2000E-Seismic Analysis Per IBC2000
3.1.9-IBC2000E-Seismic Analysis Per IBC2000
Program Description:
"IBC2000E" is a spreadsheet program written in MS-Excel for the purpose of seismic loading analysis for
buildings and various nonbuilding structures, as well as architectural, mechanical, and electrical components
per the IBC 2000 Code. Specifically, the total base seismic shear for buildings and nonbuilding structures is
calculated. For Multi-Level Buildings, the vertical distribution of the total seismic shear is also determined, and
a drift analysis can also be performed. The seismic restraint force for various components is also calculated.
This program is a workbook consisting of ten (10) worksheets, described as follows:
Worksheet Name
Description
Doc
Single-Level Bldg.
Multi-Level Bldg.
Multi-Level Bldg. (Drift)
Steel Vert. Tank or Vessel
Nonbldg. Struct.
Arch. Components
M & E Components
Maps for Ss
Maps for S1
7. This program allows the user to select only site classes "A" through "E", since site class "F" requires
site-specific geotechnical investigation and dynamic site response analyses. These same requirements also
apply for site class "E", but only when Ss >= 1.25*g and S1 >= 0.5*g.
8. In the calculation worksheets, a "hyperlink" is provided to take the user directly to the USGS website at:
http://earthquake.usgs.gov/research/hazmaps/
Once finished at the USGS website, the user should exit the website by pressing the [<-Back] button in the
top toolbar of the web browser to return to the particular program worksheet.
9. This program automatically selects the appropriate seismic response modifier, "R" for buildings and
structures and "Rp" for components, once the type of seismic resisting system has been selected/input by
the user.
10. This program will automatically alert the user with a "warning message" when any applicable limitations have
been exceeded for the particular seismic resisting system selected.
11. For reference, at right side of the display, the calculation worksheets contain some representative 1996
gridded USGS spectral acceleration (SA) values for 5 particular zip code locations (and the applicable cities),
as well as copies of the tables of seismic coefficients and factors to be used.
12. This program contains numerous comment boxes which contain a wide variety of information including
explanations of input or output items, equations used, data tables, etc. (Note: presence of a comment box
is denoted by a red triangle in the upper right-hand corner of a cell. Merely move the mouse pointer to the
desired cell to view the contents of that particular "comment box".)
"IBC2000E.xls" Program
Version 2.5
I
1.00
D
29607
0.407
0.139
36.000
6816.00
2D
II
III
IV
###
F
hn
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
C
D
D
Fundamental Period:
Period Coefficient, CT =
Approx. Period, Ta =
Upper Limit Coef., Cu =
Period Max., T(max) =
Fundamental Period, T =
0.020
0.294
1.392
0.409
0.294
545.54
###
A
B
C
D
E
F
1A
1B
1C
1D
1E
1F
1G
1H
1I
1J
1K
1L
2A
2B
2C
2D
2E
2F
2G
2H
2I
2J
2K
kips,
3 of 27
2U
3A
3B
3C
3D
3E
3F
3G
3H
03/11/2016 07:04:34
"IBC2000E.xls" Program
Version 2.5
I
1.00
D
29607
0.407
0.139
36.000
2D
F10
F9
F8
F7
F6
F5
F4
F3
F2
hx
F1
ft.
V = Cs*W = F
Seismic Base Shear
(ft.)
(kips)
36.000
24.000
10.000
5316.00
1000.00
500.00
Seismic
Height, hx
Level x
3
2
1
Total Weight, W = W x =
6816.00
II
III
IV
###
###
###
###
###
###
###
###
###
###
###
###
1A
1B
1C
1D
1E
1F
1G
1H
kips
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
4 of 27
2F
2G
2H
2I
2J
03/11/2016 07:04:34
"IBC2000E.xls" Program
Version 2.5
SD1 =
0.208
2K
(continued:)
5 of 27
03/11/2016 07:04:34
"IBC2000E.xls" Program
Version 2.5
2M
2N
C
Table 1616.3(1), page 354
2O
D
Table 1616.3(2), page 355
2P
D
Most critical of either category case above controls
2Q
2R
Fundamental Period:
2S
Period Coefficient, CT =
0.020
Section 1617.4.2.1, page 361
2T
Approx. Period, Ta =
0.294
sec., Ta = CT*hn^(3/4) Eqn. 16-39, Section 1617.4.2.1, page 361
2U
Upper Limit Coef., Cu =
1.392
Table 1617.4.2, page 360
3A
Period Max., T(max) =
0.409
sec., T(max) = Cu*Ta Section 1617.4.2, page 360
3B
Fundamental Period, T =
0.294
sec., T = Ta <= Cu*Ta Section 1617.4.2, page 360
3C
3D
Seismic Design Factors and Coefficients:
3E
Response Modifier, R =
5
Table 1617.6, pages 365-368
3F
2
Table 1617.6, pages 365-368
3G
Overstrength Factor, o =
Defl. Amplif. Factor, Cd =
4.5
Table 1617.6, pages 365-368
3H
CS =
0.080
CS = SDS/(R/IE), Section 1617.4.1.1, Eqn. 16-35, page 360
3I
CS(max) =
0.142
CS(max) = SD1/((R/IE)*T), Sect. 1617.4.1.1, Eqn. 16-36, page 360
3J
CS(min) =
0.018
CS(min) = 0.044*SDS*IE, Sect. 1617.4.1.1, Eqn. 16-37, page 360
3K
Use: CS =
0.080
CS(min) <= CS <= CS(max)
3L
4A
Seismic Base Shear:
4B
V=
545.54
kips, V = CS*W, Section 1617.4.1, Eqn. 16-34, page 359
4C
4D
Seismic Shear Vertical Distribution:
4E
Distribution Exponent, k =
1.00
k = 1 for T<=0.5 sec., k = 2 for T>=0.5 sec.
4F
k = (2-1)*(T-0.5)/(2.5-0.5)+1, for 0.5 sec. < k < 2.5 sec.
4G
4H
Lateral Force at Any Level: Fx = Cvx*V, Section 1617.4.3, Eqn. 16-41, page 361
4I
Vertical Distribution Factor: Cvx = W x*hx^k/(W i*hi^k), Eqn. 16-42, page 361
4J
4K
hx^k
W x*h^k
Cvx
Shear, Fx Story
Seismic
Weight, Wx
4L
Shears
(kips)
(%)
(kips)
(ft.)
(ft-kips)
4M
Level x
5316.00
36.000
191376.0
0.868
473.75
473.75
5A
3
1000.00
24.000
24000.0
0.109
59.41
533.16
5B
2
500.00
10.000
5000.0
0.023
12.38
545.54
5C
1
5D
5E
5F
5G
5H
5I
5J
6A
6B
6C
6D
7A
6816.00
220376.0
1.000
545.54
System
Limitations
and
Building H
=
Comments:
Basic Seismic-Force Resisting
2D
N.A.
Seismic Design Category:
Category(for SDS) =
Category(for SD1) =
Use Category =
6 of 27
03/11/2016 07:04:34
"IBC2000E.xls" Program
Version 2.5
7 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
I
1.00
D
29607
0.407
0.139
36.000
2D
e10
e9
e8
e7
e6
e5
e4
e3
e2
hx
e1
###
###
ft.
II
III
IV
###
###
3
Seismic Story Drift
Seismic
Height, hx
Level x
3
2
1
(ft.)
(in.)
36.000
24.000
10.000
1.2500
0.7500
0.3500
Deflect., xe
###
###
###
###
###
###
###
###
1A
1B
1C
1D
1E
1F
1G
1H
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
2F
2G
2H
2I
2J
8 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
2K
(continued:)
9 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
C
D
D
Comments:
Story Height
hsx
(ft.)
12.00
14.00
10.00
2M
2N
Table 1616.3(1), page 354
2O
Table 1616.3(2), page 355
2P
Most critical of either category case above controls
2Q
2R
2S
Table 1617.6, pages 365-368
2T
2U
3A
x = Cd*xe/IE, Eqn. 16.46, page 362
3B
x = x - (x-1), Section 1617.4.6.1, page 362
3C
a = (Drift Ratio)*(hsx*12), from: Table 1617.3, page 360
hsx = hx - h(x-1)
3D
3E
Amplified Amplified Amplified Allowable Allowable
3F
3G
Deflect., x Drift, x Drift Ratio Drift, a Drift Ratio
(in.)
(in.)
(in.)
3H
x/(hsx*12)
a/(hsx*12)
5.6250
2.2500
2.8800
0.016
0.020
3I
3.3750
1.8000
3.3600
0.011
0.020
3J
1.5750
1.5750
2.4000
0.013
0.020
3K
3L
4A
4B
4C
4D
4E
4F
4G
4H
4I
4J
4K
4L
4M
5A
5B
5C
5D
5E
5F
5G
5H
5I
5J
6A
6B
6C
6D
7A
System Limitations and Building
Basic Seismic-Force Resistin
2D
N.A.
10 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
11 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
Input Data:
Seismic Use Group =
Importance Factor, I =
Soil Site Class =
Location Zip Code =
Spectral Accel., SS =
Spectral Accel., S1 =
Height, h =
Diameter, d =
Wall Thickness, t =
Total Weight, W =
Structural System =
I
1.25
D
29607
0.407
0.139
100.000
8.000
0.3750
150.00
8a
Results:
1.474
2.242
d
F
C
D
E
ft.
2*h/3
ft.
8a
8b
14a
D
E
F
in.
kips
Site Coefficients:
Fa =
Fv =
II
III
IV
###
###
###
A
V = Cs*W
C
D
D
Fundamental Period:
Fundamental Period, T =
Rigid or Flexible?
0.741
Flexible
T = 0.00000765*(h/d)^2*(W*1000/h*d/(t/12))^(1/2)
Criteria: If T < 0.06, then Rigid, else if T >= 0.06, then Flexible
TABLE 1617.4.2
Seismic Design Factors and Coefficients:
Coefficient for Upper Lim
Response Modifier, R =
3
Table 1622.2.5(1), page 388
Design Spectral Respons
2
Table 1622.2.5(1), page 388
Overstrength Factor, o =
Defl. Amplif. Factor, Cd =
2.5
Table 1622.2.5(1), page 388
CS =
0.167
CS = SDS/(R/I), Section 1617.4.1.1, Eqn. 16-35, page 360
CS(max) =
0.117
CS(max) = SD1/((R/I)*T), Sect. 1617.4.1.1, Eqn. 16-36, page 360
###
CS(min) =
0.070
CS(min) = 0.14*SDS*I, Sect. 1622.2.5, Eqn. 16-75, page 387
###
Use: CS =
0.117
CS(min) <= CS <= CS(max)
<= 0.1
(continued:)
12 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
17.59
kips,
1.0
17.59
ft-kips,
Comments:
13 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
Job Name:
Job Number:
Input Data:
Seismic Use Group =
Importance Factor, I =
Soil Site Class =
Location Zip Code =
Spectral Accel., SS =
Spectral Accel., S1 =
Height, h =
Total Weight, W =
Structure Type =
I
1.25
D
29607
0.407
0.139
10.000
20.00
5a
Checker:
II
III
IV
###
###
###
A
B
C
D
E
F
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
C
D
D
Fundamental Period:
Period Coefficient, CT =
Approx. Period, Ta =
Fundamental Period, T =
Rigid or Flexible?
0.020
0.112
0.112
Flexible
14 of 27
2b
2c
2d
3a
4a
5a
5b
5c
5d
5e
6a
7a
8a
8b
9a
9b
10a
10b
11a
12a
17e
17f
17g
18a
19a
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
V=
3.33
kips,
15 of 27
20a
21a
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
Job Name:
Job Number:
Input Data:
Seismic Use Group =
Soil Site Class =
Location Zip Code =
Spectral Accel., SS =
Spectral Accel., S1 =
Average Roof Height, h =
Height of attachment, z =
Importance Factor, Ip =
Component Weight, W p =
Component Type =
I
D
29607
0.407
0.139
20.000
20.000
1.50
1000.00
5a
II
III
IV
###
page 297, Table 1604.5
###
page 350, Table 1615.1.1
###
A
Figure 1615(1) or USGS Info.
B
Figure 1615(2) or USGS Info.
C
ft.
D
ft.
E
page 377, Section 1621.1.6
F
lbs. (Section 1621.1.4, page 376)
###
Veneer - limited deformability elements and attachments (Table 1621.2)
Checker:
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
C
D
D
288.13
960.45
180.08
288.13
2a
2b
3a
3b
3c
4a
4b
4c
5a
5b
6a
7a
8a
9a
9b
10a
11a
12a
12b
lbs.,
Comments:
16 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
17 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
Job Name:
Job Number:
Input Data:
Seismic Use Group =
Soil Site Class =
Location Zip Code =
Spectral Accel., SS =
Spectral Accel., S1 =
Average Roof Height, h =
Height of attachment, z =
Importance Factor, Ip =
Component Weight, W p =
Component Type =
I
D
29607
0.407
0.139
20.000
20.000
1.50
1000.00
3a
Checker:
II
III
IV
###
###
###
A
B
C
D
E
F
###
Results:
Site Coefficients:
Fa =
Fv =
1.474
2.242
C
D
D
205.81
960.45
180.08
205.81
1c
1d
1e
2a
2b
3a
3b
3c
4a
4b
4c
4d
5a
6a
7a
8a
8b
9a
###
lbs.,
Comments:
18 of 27
03/11/2016 07:04:35
"IBC2000E.xls" Program
Version 2.5
19 of 27
03/11/2016 07:04:35
Map of Entire
Continental U.S.
Map of Eastern
Portion of U.S.
Map of California
and Nevada
Map of Entire
Continental U.S.
Map of Eastern
Portion of U.S.
Map of California
and Nevada