If particularly high vertical building parts like piers or columns have to be built, MEVAs shoring tower Space offers a safe and cost-effective alternative to conventional shoring systems. The tower units have a square footprint of 480cm, which makes the shoring tower very stable at any height. The units are pre-assembled and bolted together at ground level. The tower is built from 300cm high units which can be extended by 50cm and 100cm extension units. The shoring tower Space provides the necessary formwork bracing with just a few standard parts and, at the same time, serves as working platform for rebar or concreting works even in heights above 35m.
The shoring tower is assembled from a basic
unit (480 cm square and 300 cm high). The platform takes the complete formwork load and needs no additional braces or props. 180
Space Shoring Tower
Design
Configuration
Features and Benefits at a Glance
FEATURES
BENEFITS
Modular design for vertical buildings of virtually any
required height even far above 35 m
Safe solution Flying of preassembled units for a fast height adjustment
Assembly with commercially available planking with
access hatches
Costeffective, safe and efficient solution
Square basic dimension of 480 cm
Sufficient working space to store material and tools
Height: Basic units of 300 cm and extension units of
50 cm and 100 cm
Cost-saving transport, easy assembly, few components
Accessible inbetween platforms
Alignment and bracing of the formwork against the
shoring tower Space
No additional bracing of the formwork from the bottom required,
fast alignment of the formwork from inbetween platforms
Wind loads can be transferred into the shoring tower
No expensive additional securing of the building parts required