Professional Documents
Culture Documents
Agenda
Overview
Applications
Objectives Assumptions Material
Overview
Design
of an infinite life shaft has a spur gear and pump at the end.
Applications
Hydraulic Gear Pumps
Objectives
Using Static Analysis: Model the V,M and T Diagrams Determine the Critical Section of the shaft. Determine the different diameters of the shaft using:
Assumptions
A
Material Selection
Material Yield Tensile Strength Strength (Mpa) (Mpa) Aisi 4340 Aisi 4140 Aisi 4130 470 415 435 745 655 670
FBD
In the x direction, the equilibrium equation is: SFx = Rx + 500.0 N = 0 Rx = -500.0 N In the y direction, the equilibrium equation is: SFy = Ry - 750.0 N = 0 Ry = 750.0 N
In the z direction, the equilibrium equation is: SFz = Rz - 2,000.0 N = 0 Rz = 2,000.0 N
Calculations
In the x direction, the moment equilibrium equation is: SMx = Mx + (125.0 mm)(-2,000.0 N) = 0 Mx = 250,000.0 N-mm =250 N-m In the y direction, the moment equilibrium equation is: SMy = My - (50.0 mm)(-2,000.0 N) = 0 My = -100,000.0 N-mm =-100 N-m
Cont.
In the z direction, the moment equilibrium equation is: SMz = Mz + (50.0 mm)(-750.0 N) - (125.0 mm)(500.0 N) = 0 Mz = 100,000.0 N-mm =100 N-m
D2
D3
R= 125mm
250N.m
250mm
0.5m
Torque = Mx =.125m(-2000N)=-250N.m
Diagrams:
2136N
141.421N.m 250N.m
D2
0.14142
0.250
30.36
Power
Referencias
http://asm.matweb.com/search/SpecificM aterial.asp?bassnum=M434AP
Questions