Professional Documents
Culture Documents
Project one: Falcon Statement: winds cannot be seen, but I can see them through the movement of the wings. Falcon wings look magical and make you feel free from stress. Maybe I like wind but I can capture it through the movement of the falcon wings. Process of making: 1. First, I used a thick plate of wax then I cuted out my design using a wax saw. 2. Second I used the carving tools to carve the wax and get the design I wanted. I also used the wax files to get rid of the excess weight so when it will be casted to silver it will not exceed the required weight. 3. I also learned to use the electronic welder to fix the broken pieces and sometime I use it to carve. 4. After the piece is casted to silver silver files and sand paper are used for corrections and final touches.
Metal saw
wax plates
carving tools
Wax files
electronic welder
final piece
Project two: Fabrication: Wing Statement: To me wings are the purest symbol of freedom. The idea is very typical and very globalized. This kind of jewelry trend can be spreaded among teenagers and early twenties. Process of making: 1. First, with a black marker I draw the shape I want to cut from the metal sheet (wing shape). 2. Second I used the drill to make a whole inside the piece so I can carve it from inside first because this way is much easier to work with the piece. 3. Third, I cut out the shape I drew using a metal saw with very thin saw plats. 4. After that I used the metal files to smooth the out lines of the piece. 5. Finally, I used the sand papers to smooth the surface of the piece and give it a shiny look. Picture of tools and final piece:
22
Metal sheet
saw
drill
Sand papers
silvers files
final piece