Professional Documents
Culture Documents
3. Move equipment from containment area Strike another piece of equipment a Use a spotter for blind movements
to work area. or a person. and all backing procedures. Have all
workers make eye contact with operator
or stay well out to the way. All hands to
maintain awareness of moving
equipment and whereabouts of
coworkers.
4. Layout and Excavate trenches. a. Strike a coworker while a. Have our exclusion zone set up so no
swinging the cabin to relocate one enters the swing radius. Wear PPE
spoils (Struck by) to be seen. Make eye contact with the
operator and spotter before working in
the exclusion zone.
5. Pull wire a. Bending, working, pulling wire. a. Use good body position, utilize
equipment for heavy lifts, team lift
heavy/awkward loads.
7. Cadweld (exothermic) Weld a. Burns from hot welds & molds a. Use leather gloves and dont stand
Connections. in close proximity to the welding
process.
b. Give molds time to cool before
removing.
8. Backfill after all welds are complete. a. Slips, Trips & Falls a. Maintain good footing and balance.