Professional Documents
Culture Documents
Assignment No. 1
Problem:
Evaluate deformation of a beam fixed at both ends and subjected to a static load (Roll
number) at its mid span. Choose material, dimensions and units of your choice.
Drawing Geometry:
We are basically covering this problem in number of steps. Using static structure as
principle module, we imported geometry directly from SolidWorks. Dimensions for
beam are 200x10x5 mm.
Calculating Deformation:
Finally, deformation occurred due to force applied is to be calculated. For this purpose,
go to solution tab and select total deformation.
Final Deformation:
Solving the problem, following results are obtained.
Note that red color shows the intensity of the force at a point. Furthermore, maximum
and minimum deformation can also be shown.