Professional Documents
Culture Documents
Plantform bioreactor
The Plantform bioreactor is a plant tissue culture container for the temporary immersion system (TIS).
Plantform bioreactors are easy to work with.
Pumps, timers
You need 2 pumps, 1 for pumpimg up the medium and 1 for pumping down the medium and 2 timers (one for each pump).
With our 10W pump you can attach approx. 24 bioreactors. We also have a pump to which you can hook up 100 bioreactors.
This is only possible if you produce species with the same requirements
We have two type of timers: one with settings of minimal 1 minute and one with settings per second. Which timer you need
depends on the length of the immersion times and how critical exact immersion times are.
Filters
With an order for bioreactors we always add extra filters. This is because the guaranteed number of uses of the filter is 5 times.
Our recommendation is to check the filters after using them 5 times and if necessary replace them.
There are 3 filters in each bioreactor.
The average production cycle in a bioreactor is approx. 5 weeks. That means after approx. half a year (= 5 uses of the filters) they should
replaced.
Our suggestion is to order 6 extra filters for each bioreactor. This is the about the amount of filters you will use in one year for one biorea
slower growth.
In the Plantform bioreactor the air is changed several times a day, resulting in faster growth of the plants
Immersion time
Very accurate setting of the immersion time possible, with steps from 1 second.
More information:
Toronado BV
Meermanstraat 164
NL2614AN Delft
the Netherlands
T: +31 (0)15 212 36 70
E: Toronado@xs4all.nl
Home
Shop
Photos
Support
Contact
References
Lid 3.00
Basket 3.00
Filter 1.00
Nut 0.25
Clamp 0.50
Seal, by 2 1.00
Stopper 1.00