Professional Documents
Culture Documents
3 core XLPEinsulated cables with PE sheath and armouring, longitudinaly and radially
watertight
DESCRIPCIÓN
Stranded copper conductor class 2 according to IEC 60228, semi conducting
conductor screen, insulation of crosslinked polyethylene (XLPE), semi conducting
insulation screen, semi conducting bedding, copper screen with swellable powder,
aluminium tape bonded to PE sheath, 3 core layed up, polypropylene yarn bedding,
armouring of galvanized steel, hessian tape and polypropylene yarn serving.
Application in water, for example internal and external cabling of offshore windparks,
power supply of islands, lighthouses and offshore plattforms.
Optionally watertight conductor with sealing compound, lead sheath and Fiber ESTÁNDARES
Optics or Control Cables in the interstices available. Other voltages and EPR insulated
cables on request. Internacional IEC 605022
All medium voltage submarine cables are manufactured on the basis of specifications
and can be adapted to the requirements of the customer. Therefore, all technical
information are purely for information purposes and the electrical characteristics are
calculated for water saturated seabeds and values which are specified in the data
sheets. For your specific requirements and laying depths please don't hesitate to
contact us.
CARACTERÍSTICAS
Características de construcción
Number of conductors 3
Type of conductor Circular compacted stranded
Insulating material XLPE
Pantalla Copper wire
Cubierta interior HDPE
Tipo de armadura Galvanised round steel wires
Material used for longitudinal water tightness Swelling powder
Libre de plomo Sí
Libre de halógenos Sí
Características dimensionales
Sección del conductor 300 mm²
Nominal insulation thickness 8,0 mm
Los dibujos, diseños, especificaciones, planos y detalles de pesos, medidas y dimensiones contenidos en la documentación técnica o comercial de Nexans son
meramente indicativos y no vincularán, ni se considerarán que constituyen una representación por parte de Nexans.
Generado 23/04/18 www.nexans.es Página 1 / 2
Contacto
Submarine cable 33kV Cables y Sistemas de Alta Tensión
2XS(FL)2YRAA 3x1x300 RM/25 19/33 (36)kV Teléfono: 94 454 03 22
nexans.iberia@nexans.com
Características dimensionales
Screen section 25 mm²
Nominal outer sheath thickness 2,5 mm
Armour thickness 4,2 mm
Diámetro exterior 121 mm
Approximate weight 23,8 kg/m
Características eléctricas
Operating voltage 33 kV
Maximum operating voltage 36 kV
Resistencia máxima del conductor en CC a 20º C 0,0601 Ohm/km
A.C. Conductor resist. 50Hz and at 90 °C 0,0786 Ohm/km
Nominal inductance 0,351 mH/km
Nominal phase capacitance 0,248 µF / km
Charging current max. 1,5 A/km
Maximum electric stress 3,2 kV/mm
Permissible short circuit current conductor 1s 43 kA
Permissible short circuit current screen 1s 5,0 kA
Grounding type Solid bonding
Load factor 1
Thermal soil resistivity wet zone 0,7 K*m/W
Intensidad admisible bajo tubo 652 A
Permissible transmission capacity, buried 37 MVA
Características mecánicas
Fuerza de tracción máxima durante la instalacción 106,8 kN
Características de uso
Number of systems 1
Laying depth, center of system 1000 mm
Ambient ground temperature 15 °C
Factor de curvatura una vez instalado 15 (xD)
Coeficiente de curvatura del cable instalado 30 (xD)
Longitudinal water tightness Yes
Estanqueidad Radial
Mechanical Resistance Good mechanical resistance
Los dibujos, diseños, especificaciones, planos y detalles de pesos, medidas y dimensiones contenidos en la documentación técnica o comercial de Nexans son
meramente indicativos y no vincularán, ni se considerarán que constituyen una representación por parte de Nexans.
Generado 23/04/18 www.nexans.es Página 2 / 2